Hi there

I have been lurking on the forum ever since I've got a z110bt unit.

Ive been watching every single effort you members have made.

I wish I could join you guys. I have no programming skill tho.

I've found there is possibility to install 3rd party map into my unit

decided to move my ass little bit for my unit

I have unmodified z110bt with the firmware v 1.0000

now I got pioneerus and trying to install it into my unit

but I can not get to pioneerus shell

I have done everything accordingly.

I got lic file into pioneerus folder

then pushed home button, destination on the screen, and next track on the tray.

so,I have contacted to the developer.

He/she told me to upgrade firmware to 4.001

unfortunately, I dont know how.

I thought, at least, to do what I could do

I upgraded the firmware to 1.001 from official website.

still does not work.

could you give me any kind of headup

appreciate greatly in advance.

so,I have contacted to the developer.

He/she told me to upgrade firmware to 4.001

unfortunately, I dont know how.

I thought, at least, to do what I could do

I upgraded the firmware to 1.001 from official website.

still does not work.

 

could you give me any kind of headup

appreciate greatly in advance.

 Install CNSD-310FM.  

I am on the way

thank you very much

Thank you ver much!!!

finally, I could get to the shell.

here are problems tho.

here is my procedure I went through

Uninstalled pioneerus

Installed CNSD-310FM for the firmware

installed pioneerus

put lic file into pioneerus folder

problem 1

I can't get to the shell when the engine is of the car is off even tho I put electricity on in the car.

when the engine is off, trying to get to the shell it just shows me black and white horizontal lines

problem 2

I can't launch Igo8 ( Actually, I am not going to use Igo since in the country I am living in, igo doesn't support the maps

                                 I just want to try if it works fine)

I assumed it was a fault of designated folder and the name of exe file.

so I tried with igo8 Sanik provide me with, I put the igo8 folder into the pioneerus folder, didn't work

I put igo8 folder into the root, didn't work

I changed the name of igo8.exe to alien-navi.exe, didn't work.

problem 3

Buttons on the shell, nothing works

I have only 3 taps on the screens when I launch the shell

igo, navitel on the center , reset on lower left corner.

I can see why navitel does not work but I thought at least reset tap would work.

Am I missing something?

I just reinstalled pioneerus

now it works fine.

Edit:at the first trial, it worked it was supposed to work

       at the second trial, I ran into the same problem as I mentioned in earlier post(problem 1)

Ive just figured the problem 1 happens on and off

This is the picture of my device: http://www.autoimg.cn/album/userphotos/2012/3/17/500_a2bb_5e7419d4_5e7419d4.jpg

and the general menu:  http://www.anyopioneer.com/img/pic1.jpg

I cannot paste a picture here.

 My device Only has menu, av, navi, phone buttons and a volume knob. It's none of the series mentioned in the forum.

 

I have a local map, tried boot it up via pioneerus.

I edited pioneerus.cfg by notepad to designate a folder to where the local nav program was.

I have failed tho.

can you give me tips for it?

Ok what navigation software do you have with your local map?

Ok what navigation software do you have with your local map?

thank you for your attention

but I dont think you ever heard of it.

it is called "Mappy"

Is it software for Windows CE? and it should at least work on ARM CPUs.

Without Home? What model?

This is the picture of my device: http://www.autoimg.c...d4_5e7419d4.jpg

and the general menu:  http://www.anyopione...om/img/pic1.jpg

I cannot  paste a picture directly here.

 My device Only has menu, av, navi, phone buttons and a volume knob. It's none of the series mentioned in the forum.

Is it software for Windows CE? and it should at least work on ARM CPUs.

yes it works in Window CE 6.0

I will look it up about ARM CPU

frankly, I have no programming skill. 

I just took a C++ class in the college back in the days

I am just googling everything now.

orchid, can you get in testmode with testmode.key from this forum?

It works and put Pioneerus iGO8.3 in avic x940bt?

orchid, can you get in testmode with testmode.key from this forum?

Did you mean the mode with blue screen and menus? If so, Yes.

mucklouco, yes Pioneerus can work with Igo 8.3 and Amigo.

orchid, can you press volume knob on your device? Or have this device "next track" button? If you get testmode, Pioneerus can be installed.

mucklouco, yes Pioneerus can work with Igo 8.3 and Amigo.

orchid, can you press volume knob on your device? Or have this device "next track" button? If you get testmode, Pioneerus can be installed.

can you paste a picture of the testmode? next track is on the wheel.

How do I get the programs and tutorial to put on my AVICX940BT? Can I add maps of Brazil?

hi all

will pioneerus work on a US z140?

I am in Australia and I am looking to get the us model and run aussie maps on it

Yes, it's worked at z140.

orchid, last question. Your software version?

2.0 maybe.

Hi everyone , I'm a new member , I looking for modding my F940BT , Pioneerus is the best way ? Which are the steps to do it ? Thank's 

hi

how about the z150, anyone tried it on this model yet?

how about the z150, anyone tried it on this model yet?

Pioneerus is not working with 850/950/F50/Z150 model. There is no third party navigation software for SH4 CPU - used in *50 models.