RiccoFX

Nope, I have confirmed Nope, I have confirmed it, when I shut off the truck, the deck shuts off, and I look at the iTouch and it shows that its connected to power. But once I disconnect it, and then try to connect again, there is no longer any power. Its similar to the XBOX360 USB charge port, as its still connected while shutdown, the USB is still powered after shutdown until the device is disconnected. My Truck shuts off, my pioneer deck shutsoff, the screen folds back in (from being angled out) and nothing is on except power to the itouch, which is in standby. I go into my house, chec

I have the Z130BT, I do like the LOOK of the AppRadio, the clean look, I hate the raised bottom lip on the Z130, if it was flush it would look alot better! I would have had the AppRadio if it had Triple Pre-outs! I have a PRS-A900 high end 4-ch amp and PRS-D1200SPL sub amp, I love the Z130! Now if they incorporate the features of the AppRadio and capacitive touch screen to the Z130 say maybe AVIC-Z140AppRadio!

A few months ago I had this problem too! I changed the deck thinking it was defective, and it did the same to the other one! I did figure it out, but for the life of me, I can't remember what it was! LOL Just dbl check all your connections, MIC input, etc. It was something simple and I overlooked it while installing it, but I can't remember exactly what it was! DOH! I'll post back if it comes back to me!

This is AWESOME! If you leave your iPhone or iTouch connected to your Pioneer AVICZ130BT or AVICX930BT, the Pioneer deck will keep the USB powered when you shut off your vehicle, as long as its been connected, and if you have IOS 5.0.1+ on your device, and have WIFI-Sync turned on, you can sync music and videos to it wirelessly from inside the house! (as long as it is in range of your wifi) I can add/change songs, videos, playlists, and then press the sync button to my iTouch or iPhone thats been left connected to my pioneer deck, and it'll sync wirelessly while I'm in the house and my tru

This is AWESOME! If you leave your iPhone or iTouch in your vehicle, and if you have IOS 5.0.1+ on your device, and have WIFI-Sync turned on, you can sync music and videos to it wirelessly from inside the house! (as long as it is in range of your wifi) I can add/change songs, videos, playlists, and then press the sync button to my iTouch or iPhone thats been left connected to my pioneer deck, and it'll sync wirelessly while I'm in the house and my truck is outside! How awesome is that! No longer needing to bring the iTouch in! I just leave it, if I find a cool tune or vid, I just add to iT

Had no lag issues with ours! Have you hooked up the VSS wire? Has it been fully calibrated? Most units initially takes time to calibrate at the beginning to learn the vehicles dynamics - u must reset/re-initualize this if you move it to another vehicle! Roughly takes a few days to do and get better over time. Also is the GPS antenna installed in a clear sky position?

Yes you can - on the faceplate press the "REAR" button - keeps the DVD player playing on the rear output - so you can listen to another source - you can loop the rear monitor out to the backup camera in and goto the SPLIT REAR & NAV screen so you can watch the video - have the gps and listen to another source at the same time!

Well I guess i have only sold the 900 series and z series - I have never sold teh 700 since we dont stock it for the price diff is not by much here So for all the ones I have installed the VSS has made a difference since I have only sold 900/910 F series, Z1/2/3 Z110, series and N1/2/3/4/5 + D1/2/3 series!

You don't necessary need to 'remove the MUTE wire" for this to work, you can add a wire to it instead of giving up the mute wire or having a hard time removing it! I have used a small solid strand wire or even a connector from other equipment using the same pin and inserted it and works... seems a lot of ppl here think 'it MUST be the MUTE wire that you have to remove and move over! Its just common to use the "mute" wire cuz most ppl dont use it so why not use it for this - but in many of my installs I just insert another wire to it! So much easier!

I think u can go into your settings and set how much the MUTE button mutes out... Goto page 161-162 in your manual...

"will the old GEX-P910XM module work on the new Z110BT?" Supposivey the GEX-P910XM will not work on the new Z110 according to Pioneer's website... The New model is GEX-P920XM which sells for around $100 so... MSN Direct Tuner ND-MDT10 is $110.00 The HD Radio GEX-P20HD is $100.00 The XM Radio GEX-P920XM is $100.00 The Sirius Radio is a two part unit: Sirius Tuner SC-C1 is $50.00 Pioneer Sirius Interface CD-SB10 is $70.00

That harness is optional. You can use a standard harness which will work fine, or use the more expensive one, such as the XSVI-5520-NAV XSVI-5520-NAV - this harness will give you the VSS pulse, Back-up sensor, Park brake sensor, and R.A.P. (Retained Accessory Power) which after the ignition is turned off keeps the radio on for another 10mins or until you open the drivers door Otherwise you can still use the basic harness and you have to manually find and harwire the specific wires like the VSS and backup and park brake wires manually! You'll also lose the R.A.P. feature as well....

It actually does - it keeps the speed sensor and distance travelled accurate when you in a tunnel or area with lots of buildings or trees that may cause loss of SAT connection! Also will enable the 3D calibration mode to give better results and also angle!

They do look nice but in case if you didn't know, the AVIC-F700BT only plays CD, does not play DVDs. You have to go to the AVIC-F900BT/AVIC-F90BT. Also no more Disc swapping for maps - all are on built-in flash! But for myself I'm waiting if they're coming out with a newer "Z" Series like possibly the AVIC-Z4 with the same menu/look of the "F" Series but has the large screen and look of the Z3 and has a HDD to store ur music on - that would be sweet!

Did you just send in the main unit or the hide-away unit as well? I'm asking because the FM Tuner is in the hide-away unit - if you only sent in the main unit for the flex ribbon repair then this does not sound right.

You've just answered your own question! Early adopters pay more for R&D and also technology becomes cheaper as time goes... As for the N4 the technology is now cheaper to manufacturer and most of the R&D has already been done and taken over from the previous models! So all they have to do is just a little modifications and add a few extra features... And also I do agree the N4 is ugly! The best looking one I say was the AVIC-N1 - if the AVIC-N3 had the same knobs as the N1 I'd bee happy enuf - even if the N4 kept the same style I'd be happy to get one right away! The N4 just

Use the minus (-) ones: DVD-R or DVD-RW I use Sony and Maxell ones - works great! Make sure you finalize the discs when you have finished filling your discs otherwise they will not read!

I have done it all the time - works fine for me! I've even re-used them for vids too!