dsrtlawman

Yes...hold the "V" button down for a few seconds to enter the tilt screen.

ducatiboy, For what it's worth..i can send you my update disk, i know that ti worked fine with my unit. No problems during my install of the new software. PM me if ur interested.

Again, ducatiboy comes through with flying colors. I was able to burn the iso image into a usuable update cd and the unit updated just fine. And the good news is the 2 wire bypass is unaffected--all funtions are still available while driving including DVD viewing!! Now i just need someone to call to see if the echo has been fixed. If anyone needs the update CD, just let me know and I will be happy to mail it out to you.

Had a feeling something like that was going on...when I clicked on the iso file on my computer, a CD copy program opened and asked if I wanted to burn the CD....Just like it was supposed to. Will give it another try and report back on the installation and the 2 wire bypass. You are a life saver..Thanks again!!

woodman, what exactally did you do to get the update to work? I have the same problem you did. All i get is cd rom inserted after putting in the cd. I've tried inserting it on both the av and map screens but get the same response. Do you need to put the iso file in any type of folder? i just burned it all by itself on the cd. Do I need to include dummy data with it to equal at least 100mb? I have the newer HU that is bypassed using the two ground wires since the flasher circuit did not work. Any input on this problem would help. Thanks

Your phone will work just fine

I had a Parrot and it switched over to the phone with a touch of a button on the caller ID display. Sure was nice when you wanted a little privacy during the call. No such luck with the Z1. Most likely, you will have to push the menu button on the phone while you're on the call and look for a Bluetooth Disconnect or Privacy setting. That should break the Bluetooth connection and give you some privacy while on the call. You will most likely have to turn Bluetooth back on when your done to go back to handsfree. Kinda of a pain but this is just one a a handful of things Pioneer left ou

No, You cant have a video playing on the front face and another sound source playing through the speakers. The exception is if you have rear monitors attached to the system.

Your Nav Traffic service is not activated. It took me three calls to XM before they actually turned on the service. Once the traffic service is working, UPDATING will change to TRFC.

I've trued everything on the timing of the flash for the lights. My unit will not unlock. Goona look around for an older unit to swap out with.

No, your circuit is not installed. I wanted to make sure the unit responded to the override before I put the circuit in. I am turning the lights on when the the very fisrt text type is on the screen and turning them off when the color logo appears. Is that not right? I really want this to work. Im pretty sure I have a June 06 unit but cant seem to over ride the system. If I'm still having trouble, I will pull the unit and verify the date on the case.

Im pretty sure its a june 06 unit but I cant get the flasher to override the system. Every other function works like it is supposed to including dimming the unit when I turn on the lights so I assume that the unit is wired right. Im Turning on the light as soon as I see the pioneer boot screen and turning them off as soon as the logo appears. No cigar. Still locked out unless stopped and ebarake grounded. Dont know what to do at this point but look for an older unit and swap it out. Any suggestions?

I have a july 06 unit and flashing the lights no longer work. Anyone know anybody at pioneer that might have some insite as to where the hid the override?

It appears the units made in June 06 have had the flasher bypass fixed. I just bought a new unit and couldn't get the ducati boy flasher circuit to work. Sent it back since the cd wouldnt eject and got another June 06 Z1. After installing it, I tried the flasher bypass but, just as in the first one, this one too did not open up all the functions after flashing my light at boot up. I did not install the circuit since it would do the same thing as I did manually. It appears pioneer closed the back door or at least buried it deeper into the software. I guess there is no marine application an

How is the screen quality on the Z1? Very Good. 1440 X 234 pixels Does the Z1 mute or lower your speakers when the nav voice comes on? Yes ...Can be muted down to -20db Is the nav voice through all speakers? You can have to play through all the speakers or select the left or right. Is there echo with the bluetooth setup? If you set the phone volume low and use the right speaker the echo is almost non exsistant. Can I turn on the rear camera manually? Yes, to some extent. The mapping screen has a rear camera option where 2/3 of the screen is rear view from the camera and

I know the Z1 shows you the next street when you have a route programed in but what I want is the unit to show me the next street when I dont have anything being routed. My Garmin displays the next street you are approaching as you driving just while it is in the normal map mode. It is very useful if you know where you are going but cant really see the street signs due to darkness. Does anyone know if the Z1 will do the same thing? Ill I can see is that it displays the street and city you are in but doesnt state the next street approaching. You have to have the map zoomed in and rea

MIne is in a 2007 Toyota FJ Cruiser

Just to let you all know...I think the problem is with my Z1...NOT DUCATIBOY's FLASHER! I guess the choice of words in my post could have been better. I new Z1 and flasher are on the way and will be installed by Wed. I will update this post with the results. Sorry Ducatiboy for any negative unattended publicity. You are a great asset to this forum.

One thing I really liked about my garmin unit was that it displayed the next street you were coming to as you drove. I noticed that the Z1 just displays the current street that ur on and only displays the next street during routing directions. Is there a way to have the Z1 display the next street ur approaching instead of the current one ur driving on?

I have the nextel i870 also...I will try and bond with the Z1 and report back on what happends..Stand by

okay....my version number states "01.0000" . Is that the same as all of you have? eap...i cant believe ur unit worked after the circuit was reinstalled. I think I will print out ur reply and show it to my installer and maybe I can convince him to give it another try. Ducatibay...thanks for ur offer to send me out another circuit. I think I will take you up on that offer. You just sent it to me last week Fed Ex overnight. But there seems to be another glitch with my unit. The cd player wont eject. The installer put in a movie in to show me the dvd function and now he cant get it back!

Tried that already....Took the circuit out, hooked the wires back up and left the ebrake ground wire still disconnected. I flashed my light as the Z1 was booting up but still had the same problem. Most of the boxes were grayed out. The installer then took the ebrake wire and grounded it out and as soon as he did, all the grayed out buttons turned black....pulled the wire again....buttons went gray again. Had to have him hook it up as per specks just so I could have a functional unit. Looks like Pioneer might have fixed this flaw in some of the newer units. Bummer!!

How do you transfer the contacts from the Razr to the Z1? I have the old software installed on my phone that enables OBX.

Well I just bought a new AVIC Z1 and the flash override switch and IT DIDNT WORK!! I had the shop double check all the wiring and it was installed correctly. The illumination worked on the unit and I left the ebrake ground wire off. The unit only worked on audio functions..Most of the setting buttons were grayed out and I could not perform any mapping address search functions. Had the installer remove the head unit and ground out the ebrake wire and ALL THE FUNCTIONS RETURNED to normal, even with the switch in place. Any one else experience this problem with a new unit?

Well I just bought a new AVIC Z1 and the flash override switch and IT DIDNT WORK!! I had the shop double check all the wiring and it was installed correctly. The illumination worked on the unit and I left the ebrake ground wire off. The unit only worked on audio functions..Most of the setting buttons were grayed out and I could not perform any mapping address search functions. Had the installer remove the head unit and ground out the ebrake wire and ALL THE FUNCTIONS RETURNED to normal, even with the switch in place. Any one else experience this problem with a new unit?