Jump to content


  • Content Count

  • Joined

  • Last visited

About Tiredhands

  • Rank

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I have WC6600. Same thing. Anybody have a working bypass?
  2. I tried it a few times to practice on a spare wire of similiar gauge.
  3. As a follow up, I spoke with ADS and confirmed the latest RR version for the TO2 fixes the reboot issue. Its version 3.1 for me. The jumper still works. Glad we solved this.
  4. No more reboots for me after doing this. I still have the error and loss of instrument cluster audio info on my Tacoma dash until I restart the unit but steering wheel controls work and audio doesn’t cut out. Apparently there’s a firmware now for Maestro RR for TO2 called reboot. You may be able to flash it without calling ADS, but you may need to give them your account username so they can add it. I haven’t tried yet.
  5. Sorry, following up Again. Made a jumper from the black/red wire to the red wire from the radio and capped the end going Into the RR per Maestro support. This will isolate the issue if it’s actually maestro related or radio related. Pretty sure the power goes directly to the radio now and not though the maestro. We’ll see if this fixes it.
  6. @bonee if the issue is still occurring they advised I make a jumper from the accessory wire to the power wire into the RR effectively doing what you say to rule out issue with the RR. I will try that if I continue to have issues.
  7. So I reflashed the RR from 2.07 to 2.09 so we’ll see if that improves it. What do you mean it is the RR? Do you have experience with it?
  8. I’m having this same issue in my 2017 Tacoma with the T02 harness. No detectable reboot pattern, but sometimes it is accompanied with a “this Maestro accessory not supported” error before it turns off. I have a AVH-W4500NEX.
  • Create New...