djoker04

I have 4 monitors in my armada and Have 3 AND the DVD player going to the Fuse box via a dual in-line fuse holder. My Q? is should i use a the proper Fuse AMP for the slot (10) and use a lower for the other or go higher. When Connected it's causing a Batt drain. My other opt is to connect them to a switch and turn it off when I get it out. Thanks in advance Karl

Now that's what you call a theft proof system. A true removable face plate. Way to go!!! 8)

[quote name="digxrayguy"]Well, tsiawd666 was right. The echo is still there and I'm back at square one. The only way to try and work with the system is to turn the volume down where it's really not useable. I have a fairly quiet '04 Suburban and it just doesn't work. I'm going to call back to Pioneer tomorrow and follow up with the case # to complain. I would encourage everyone else that is not satisfied with the results of the bluetooth product to call and complain. Other companies are able to provide a product without the echo so Pioneer needs to improve the processing of the system to

[quote name="ezoq"]Unfortunately you're going to have to wait for technology to catch up with the times. your cedes uses a sound system called MOST. Its fiber optic. Basically the only copper in your sound system is the power, groun, and the wire running to each speaker. Other than that every component is connected in a loop. Fiberoptic in, fiberoptic out. No dice. I just installed a nav-tv ipod interface in one the other day...[/quote] Thanks. I'l let him know. K

[quote name="BigFloppy"]Now, that looks like a realy useful interface... I didn't even look at the wife's D2 video harness so I don't know about the external video connectors BUT on the Z1, this might just be a really useful addition (and throw away the existing CD-IB100)[/quote] B4 you order go to Walmart (or something like that depending on where your from) They carry this and others. Never paid much aatention to it but seen this all the time. Might be cheaper or save you on the shipping. K

[quote name="cntrylvr79"]What year is the benz?[/quote] 2006! Goto crutchfield.com, plug in the vehicle and you'll get pretty much everything you need to know. Crutchfield data base is not up to date seen that with other vehicles!! Thanks K

My Father in law has a CLK 500 Cabrio Hardtop. He is thinking about the Z1 and I need to know what Install kit and Harness is out there if any. Please help me out.Thanks K

Used Cell cam. One is clear other dark also used Digi will post up later. Have to many on diggi need to delete. Sorry it took so long.

[quote name="Wireless King"] [quote name="djoker04"] [quote name="m_specs"]searched it. thanks .. looks like im waiting on a software upgrade. thanks[/quote] Y? When you are talking to someone tell them to help you out.Turn the phone volume down and adjust the Volume on the HU. Start from 3 turn it up 'till the other party says it's free of echo. Mine is normally phone on 3 HU on 9-11 depends on other parties phone. Also Mic placement is a key factor. Mine is located directly in front of me Behind the Steering wheel. I'll post a pic this weekend. Good luck!![/quote] oops I

No! You can only use the CD-BT100.

[quote name="ducatiboy"]There is a vehicle fitment guide, more like pics, but it will give you an idea.... Sorry for the long link: [url=http://www.pioneerelectronics.com/pna/v3/pg/division/demo/0,,2076_310069681,00.html#unit=AVIC%20Z1§ion=VEHICLE%20FITMENT]http://www.pioneerelectronics.com/pna/v ... %20FITMENT[/url][/quote] I gues they don't know it will fit Nissans. I took a look because a friend has the Maxima and wants to get rid of his radio. He has the Info screen on top. Any one know if there is a aft mkt bezel for the MAX. K

Sweet look 8)

Post Pics of final install please. My Father n law has a MB C-class Conv and he might be intrested. in going with the Z1 or D2.

Thanks I'll look into that. Well I did the change around and I nominate myself for the DAISY award (Dumb A$$ InStaller of the Year) I went back and looked at the harness I connected and realized that there were only 12 pins. So I looked thru and saw a harness tucked away at the bottom and sure enough there it was. Attached reconnected and programed. I swear the program part was so Dang easy. I have a small tiny delay on the Vol. But that's good for me. I programed Vol +/- Mute Source and preset +/-. Thanks for the help. K

Sweet. I'm going to take my original bezel fiberglass the opening and then recut it. I'm going to do my own carbon fiber dash cover. BTW I have to try the PAC Audio programing again. I have to start by regrounding the system. Then check for connections. I made new connections for the resistors so I'll re do that just in case I did some thing wrong with them. Again Nice install. Do you belong to the Clubtitan.com forum?

I did the connection like I was suppose to according to Spinners help. But it's not programming right. I'm to hold the program button until the light is steady then I have 7sec to hold the Vol up until it goes out then I'm to let the button go and the light will come back on. Well it's not. I tried and I tried and it's not working. Had to stop to go out with the Family. Now I did hook up the ground (blue wire) to one of my grounds from the system. Could that be a Problem or should I start from scratch? Also I'm not sure if I damaged one of the resistors with the heat shrink. I'm pushing tow

YOU got it a Nissan Armada. And thanks I'll do that just like you said. I'll keep you posted on the results. Now I can get some sleep. At 0230 damn dawg came and woke ME up to go out because my kids 4got to put her in the cage. K

DUUHHHH!!! :? :shock: just read the tiny small print and it told me which resistor is which. Still need help on every thing else.

Ok here's the deal I just recv'd it and I only have to follow Note #8. Here's the Note..................... Plug is located on AV Switch panel. The AV Switch panel is the radio control panel. Connect a 150 ohm resistor to vehicle's pin 13 wire. Connect a 47 ohm resistor to vehicle's pin 12 wire. Connect remaining ends of resistor to the INTERFACE's white wire. Connect vehicle's pin 14 wire to chassis ground. Plug is located on AV Switch panel. The AV Switch panel is the radio control panel. > OK Connect a 150 ohm resistor to vehicle's pin 13 wire. Which one is the 150?

[quote name="m_specs"]searched it. thanks .. looks like im waiting on a software upgrade. thanks[/quote] Y? When you are talking to someone tell them to help you out.Turn the phone volume down and adjust the Volume on the HU. Start from 3 turn it up 'till the other party says it's free of echo. Mine is normally phone on 3 HU on 9-11 depends on other parties phone. Also Mic placement is a key factor. Mine is located directly in front of me Behind the Steering wheel. I'll post a pic this weekend. Good luck!!

[quote name="m_specs"]searched it. thanks .. looks like im waiting on a software upgrade. thanks[/quote] Y? When you are talking to someone tell them to help you out.Turn the phone volume down and adjust the Volume on the HU. Start from 3 turn it up 'till the other party says it's free of echo. Mine is normally phone on 3 HU on 9-11 depends on other parties phone. Also Mic placement is a key factor. Mine is located directly in front of me Behind the Steering wheel. I'll post a pic this weekend. Good luck!!

[quote name="whtcrxghst"]Its not recommended--but, Pioneers CDBTB100 will hook-up to anything P-bus. The interface is bad so I wouldn't bother if I were you [quote name="pontiacpassion"]I've been looking around and I'm assuming that AVIC d2 is not blue tooth compatible am I right?[/quote][/quote] If you don't mind having the basic handsfree features w/o the bonus' of phonebook entries then it's not bad. Pros: It works! You can do voice dial,redial last 3 in/out coming. even though you don't see the entire number all the time you can get full redial. Cons: I have yet found

Poss Dumb AZZ Q? but do I need a DVD writer to do this. I don't have a DVD writer but I have Neo/sonic and 1 other. What is Needed for me to accomplish making the disc? I can do photo shop so that won't be a problem. Thanks K

test

[quote name="knicks0819"] [quote name="djoker04"] You must of disconnected the Air bag sensor when doing the install. K[/quote] Yea, I probably did disconnect something with the airbag sensor because I pulled out a bunch of plugs from the ECM and other places trying to find the VSS wire and reverse signal (found them eventually). So what you're saying though.. is that the light is on probably because I took out the plug and put it back in and it has nothing to do with a malfunction or anything in the airbags (the car didn't move at all from start to finish of the installation)?[/quote]