AvicUserBR

Working on "cars" and working on "car audio" are totally different. I'm not going to take my stereo to a mechanic, and I'm pretty sure he won't bring an engine to me... Good work on fixing it. Point taken. I'm by no extent an installer but have been doing my own stuff for the past 12 years. I guess I overlooked it and he just didn't know what he was doing. Thanks again for the help guys.

Evidently tucking them behind the radio (not plugged in) was sufficient. LOL I'm going to have to heckle him now cause its a pain to get all this stuff in the dash with 3 PAC interfaces.

Mine wasn't plugged into the RCA's correctly. My dad helped and he obviously didn't know what he was doing even though he has been working on cars for 40 years LOL.

I'm going to pull everything out tomorrow and double check again. It took me and my dad both to get all the wiring in the dash with all the PAC modules needed to work on my vehicle. I hope I can get it back in without an extra set of hands. I'll update when I get it figured out. Thanks for all the help guys.

I just got back. I tried a new Pioneer cable and a new Apple cable and both were a no go. I guess I'll wait until Christmas to try to send the unit in. I can still buy squaretrade warranty. Is that recommended?

I just placed an order for one at Best Buy online for in store pickup. If that doesn't work I guess the only option is to try to send in under warranty?

It is definitely set to iPod. I have double checked it several times. I've even taken it off of iPod and turned it back to iPod. I talked to Pioneer and they told me to send the unit back. I bought it on eBay so obviously thats not an option. Looks like I'm stuck going through the guy I bought it from. If the cable was bad would it still show the iPod? If not I might buy one from Best Buy and try that before pulling the unit and shipping it off to who knows where.

Yeah the av1 is set to iPod. Its really odd. It shows album art and all and shows its playing but no sound. I thought maybe it was just an iPhone problem so I tried 2 other iPods and the same problem.

I searched ipod no sound and didn't really get any results. I just installed a AVIC-F90BT over the weekend. I have sound from Sirius, AM, FM, CD, DVD. I plug in my iPod and I get a beep from the iPod. It shows up in the list of sources and the iPod shows Pioneer on the screen. I can access the playlists, the songs, and etc. It shows to be playing but I don't have any sound. I have tried with an early 2 or 3G ipod nano and a iPhone 3G, and a 1G ipod touch. No luck with any of them.

I just wanted to update. I definitely was the version of the interface. The one I had did not have the proper information for the Infinity amp. I just unplugged the old and plugged in the new and all problems were instantly fixed.

Sorry. I wasn't trying to be misleading. The information I got from Pioneer stated that you need 2GB or larger. If I'm incorrect I apologize and hope you find the answer to your question.

Minimum 2 GB card required. You are not getting everything on your card.

Thanks for the warning. I'll keep backups of everything and update you guys on how it works out. Thanks

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=260308449566&ih=016&sspagename=STRK%3AMEWN%3AIT&viewitem= I just purchased one of these on eBay. I got several of the cheap SD card readers for .30 cents and etc. and they have worked flawlessly with SDHC cards. I have one 16gb name brand card that I use in my Nikon D90 but I don't want to mix it between the camera and the F-Series. Other than that I have some spare 2GB cards. I am going to try it since I already bought one but would like to know if anyone else has used one and what your experience has been.

I have mine mounted under the dash in the factory GPS antenna location. It is right beside the center channel 7th speaker i my dash. There are no vents or anything above it and I have a strong GPS signal.