1loudls

well your unit is either broke and needs to be sent in to be fixed, or there is a problem with your install like having the ACC and constant wires hooked up backwards. what kind of car is this installed in?(this should always be listed when asking for help with a problem like this as car specific can make a huge difference in where to start troubleshooting) the reason i ask is some cars use other cars harnesses but sometimes the pin out is different for example: certian model ford focuses and a few Mercedes use a Volkswagen wire harness, everything is the same EXCEPT for the red an

dont have any problem getting more storage by using an Ipod... ...also there doesnt seem to be any problems with file sorting either.

dang, 22 bucks and free shipping. that really is a hard deal to beat!

exactly which part are you having trouble understanding and are in need of further explanation of???

well actually it took some more of my personal time away that i could be doing something that actually makes me money or helps somebody out that doesn't need to be spoon fed everything. the point is that i shouldn't have to keep repeating myself for people who are too lazy to read through themselves. there are a lot of knowledgeable guys on here that do a lot to contribute to make this site as informational as possible, they dont get paid for their help, they are here doing it just to help out the community. the bare minimum that could be showed to these people would be to actually rea

well that is simple, you either A: do not live in America (discussed earlier), B: have no idea how this unit (or any pioneer model of recent) functions (also covered earlier in this tread), or C: have not read much of any of the last 14 pages. hell, very well could be all of these... dont worry, i wont make you waste "15 minutes you'll never get back" A: that just dosnt work for American units B: AMERICAN pioneer units need to "see" ground applied, removed, then reapplied AFTER the unit boots up (most models anyway, others may need a second wire moved and grounded) C: both

timely firmware updates with android? yeah right, unless you have a nexus device, you will always be behind on updates. if your lucky, its only a few months, a lot of the time its a year or more if ever... unfortunately, this is how it is with just about all of the brands, something has to be seriously wrong or broken for them to go back through and release a fix for it.

buy a tr7, then buy a relay (dont worry about whether your getting a newer or older model as 99% of places selling them wont know the difference, and since the older one is, well older, its going to be harder and harder to find one. that was more just thrown in there because sooner or later someone with a super old module that bought it used would pop on here...) then print out the very first post (and probably the second as well because of the small typo) and give it to the installer (if your installer sells TR7's then they should be much more familiar with them...) then pay for the i

yes the alpine mode does two things, it provides a positive output (for foot brake) on then off, and it provides a negative output for the hand brake on, off, and back on. so if you just hook the AR up to the hand brake wire, it will give out the "set, release, set" signal of the brake that the AR is looking for. (i haven't verified it myself, but in theory it should work fine, and others have said they have had success)

simple, it cant. all it can do is make the unit think that the brake is set when its not, if your unit is showing video, it is hooked up right and is no different from just having the wire grounded, the radio cant "tell the dirrerence" from ground, the ground at the parking brake wire, or the ground from a relay or TR7.

.

all of those answers were in the last 13 pages, please re-read(or actually read), and decide on what method you would like to try.

I would say it works, but I wouldn't say it works good...

delete each from each others memory, then re-pair them back together

1) access to certian feature when the P brake is not set. 2) that question has been debated over the last 12 pages, read through it, and choose the method you feel comfortable with, every pro and con has been talked about. 3) the pro can be programmed via USB on a computer.

the voice control is not all that great, the older F and X series used to have this feature, and it worked kinda OK sometimes. mostly if you want to show off to your friends, but as for day to day use, it just gets annoying and i would rather just use the buttons and get the job done faster.

the reason the connection time is so fast on the D3 is because the bluetooth is handled through an external module, therefor the module can start to power up while the avic is booting. the reason that the newer avics take so long to connect is because the bluetooth hardware is inside the AVIC, therefor the AVIC needs to fully boot up, before it can load the drivers for its hardware, and SD playback and bluetooth are the last things to get turned on. so, long story short, no there is not really anything you can do to make you phone connect any faster.

silly rabbit, doesn't mean that the driver is watching anything, very well could be passengers watching through auxiliary screens as designed or even legally while parked...

personally, I wont buy a unit with a moving faceplate, sooner or later it will wear out and need repair. i dont mind losing a little screen size to gain long term reliability

this is why I would never buy something like an app radio, I have already had a couple of customers come back after upgrading their phones who now have very expensive FM radio's in their cars

as with every bootleg thing shipped from china, I'm sure there are a couple that will work, but most will be broke before it ships (or shortly after being put in)

if they have a VGA adapter that outputs video, they are outputting analog also you cant convert any type of digital signal to any type of analog signal with out some form of processing or device doing the conversion which a simple adapter wont have HDMI to 30 pin (old ipod to new TV) would be useful for anybody that needs something like that but it all comes down to what build their devices to do, and since they dont like sharing a lot of their information, we can only wait to find out what they can or will make

Well VGA is an analog video signal, not digital, so while this is not the right signal that we need, it is at least a good sign that video being outputted from the unit is not dead. if the units are outputting VGA, then composite video output is not that far off, its probably now just a waiting game until the correct adapter comes out, because VGA can be converted to component, and component is just a more broken down version of composite. there is still hope! however it is also likely that we will see newer systems that work with the newer hardware before we see the right adapters.

^ there, i fixed it for you! lol

one of two things is gonna happen, either apple will release a lightning plug to usb AND composite video out only if the signal is actually sent through the lightning plug, and once apple makes it, everybody else can) or what signals are sent through the plug are not compatible and the next generation of avic(hopefully the next generation) will address this issue, and unless you are willing to replace your nav system, you will be screwed