carver

thanks before i don't find jtag or rs232

2 pionara yes, you code - is first byte in unit SN number. stored ...im my F90 - in flash, in first KB. near BT MAC, screen calibration and other. it used only for customise shell. no FM step or DVD region change.

i also tried to understand the sample.dui format - but it was difficult. i try wrote smal scripts in perl for unpacking. maybe it will help someone becouse I sold Appradio for a long time. 1) install activeperl or ubuntu (joke) 2) copy script to sample.dui folder 3) use like "perl dui-unpack2.pl" and it extract and convert file to "out" folder. dui-unpack2.rar

2 Marciomech no need put c66shell to nand disk. it files only windows switcher to testmode or main shell. it already present in windows folder, but you cant see it. main shell - CIS.EXE, from nand.

if Appratio boot in CE, and reboot after without SD - you HAVENT cis.exe or ither files at \"NAND FLASH\CE66" forlder. i has this before when delete my cis.exe. you need try update again or copy files by hand.

yes, i also planed buy x930, i can remove all warning, like in f90, create testmode, and can upgrade navigation to primo, but microSD - not for my fingers, and easy lost car control when change microSD. so, i don't buy x930.

i try unpack sample.dui with script and picture, but it so hard for me, so i share only then there. for see picture - you can open some big *.raw files from sample.dui in InfranView, as RAW, set 800x480, offset 80 and 32 bit, and it show. for other picture - need other resolution (two first file byte) so, i just share sample.dui, perl script and extracted parts inside link. http://www.4shared.com/file/BE_zV8v9/pioneer_appradio_sampledui_unp.html

i add files from \windows folder, with default registry, to first post.

at this moment - MS Device emulator working only for ARM CPU. Appradio used MIPS CPU, and no windows CE emulator for it. sample.dui - is format from CE66 series of ForYou Ge, but no unpacker/packer for it at this moment also.

1) a small utility to run Windows Explorer instead of the standard shell on Pioneer AppRadio SPH-DA01. need to unpack the attached file, put CE66Tool.exe in the root of the microSD card and turn on the device. CE66Tool.rar 2) also, if anybody need, files from \windows folder pioneer appradio v2.22 windows folder.rar 3) i also try unpack sample.dui with script and picture, but it so hard for me, so i share only then there.  for see picture - you can open some big *.raw files from sample.dui in InfranView, as RAW, set 800x480, offset 80 and 32 bit, and it show. f

i has pioneer appradio (Foryou CE6666N) in my hands, with wrong eboot inside 29lv160 flash. so, i looking who can read 29lv160 with beeprog or via ActiveSync, and I make and attach PCB board photo, if anybody need.

2slvrdrgn123 i'm dont use BT in avic. just change files. can you write more detail, how i can repeat ?

i start using AVIC_F700BT_F900BT_CNSD200FM_VER_4001000.zip with my AVIC-F90BT/UC today and new fixed files from sticked topic. no any problem at first drive test

i use AVIC_F700BT_F900BT_CNSD200FM_VER_4001000.zip with my AVIC-F90BT/UC, so i update first post in topic. just for testing, wait feedback for general using.

2 diaftia I'm not the best solution. My English is very bad, narrow interests, f900 interested rare. As far as I know there are other changes AV.exe, which erased a message from the camera and video varningov (Video CDs) seems still has not yet been removed. the best solution - will be a new topic, in which the moderator or supervisor will gather all these files, make clear description, and will periodically update the post. Well we are on a local forum (4pda.ru) did so, but I'm not the person that can do it here. sorry/

Yes, I have such the same problem. when leaving the garage - often the satellites are not immediately, and the map freezes. possible reason - igo / ezrider. I do not know. problem has always existed, but before MAP pressed later, so the problem was noticeable.

upd 29.12.2010 update for 3.020200 version, UC or EW with a new phone call - AVIC always switch to MAP screen. in first post i attach modified \My Flash Disk\APL\Tel.exe, after his replacement, when an incoming call on AVIC remains an old window. This is a test version, since I do not use the phone with AVIC. please leave feedback about problems. thanks

anybody can share all files from "CNSD - 200FM" and "CNSD - 250FM" cards ? thanks.

yes, before - admin make big mistake, and no anybody help him. need move X910BT, AVIC-X710BT model to F-series, or create new folder for x920 model anybody has link to X920 service manual or software update ? thanks.

yes. i also used 0sec version, but few guys write about problem with some used iGo skin and additional software, so i set two seconds. mainmenu.exe fix works very easy, when avic select startup screen (TopMenu, iGo/Warning, or Passwors) i add code to start new my thread, only if MAP-warning selected and in my thread, i just wait two sec and press MAP button. .text:0005A710 press_map .text:0005A710 00 40 2D E9 STMFD SP!, {LR} .text:0005A714 28 00 9F E5 LDR R0, =0x7D0 ; dwMilliseconds .text:0005A718 11 31 FF EB B

yes, just copy/rewrite to APL folder, but this files from 3.0202 version. also, if mainmenu.exe don't help for powerup warning, you can back original mainmenu.exe.

also i add SystemSetting.exe for show Pioneer DEBUG MODE in System Information tabs.

i update first topic post for 3.020200 version, UC or EW.

you can open any DLL file from Z110BT/F10BT in WinHex, like ceddk.dll, and see version C:\WINCE500\PBWorkspaces\WSNX007_MainOS\WINCE500\PF09Light_ARMV4I\cesysgen\oak\target\ARMV4I\retail\ceddk.pdb

2 VBLUE42 sorry for my bad english, if you loking for testmode, you can try create file TESTMODE.KEY at SD/USB. and/or make link to Explorer via testmode.exe/testmode.mcr(like in F-series) ? also, use IDA or WinHex, and try looking NPSysCtrlHandler.dll and NSystemInfoLib.dll files, i posted links in other topic. i use f900bt, so, can't test this way.