Jump to content
AVIC411.com

Jfinley0

Members
 View Profile  See their activity

  • Content Count

    226

  • Joined

  • Last visited

 Content Type 

Everything posted by Jfinley0

  1. Jfinley0
    That was my first thought. I did wipe out the flash drive and reinstalled AvicNet 2.1 again. Same thing. The navigation buttons greyed out but all the other buttons is working. Also I noticed that when I went to the nav(map) screen, some of the short cut buttons works but any buttons that works with Navigation or System did not work. So I wiped out the flash drive and re installed backup AvicNet 1 and everything works fine. On another note, do you know the which bmp file is for the AvicNet 2.1 at "Top Menu" screen? It looks nicer than the older AvicNet. Jimbo
  2. Jfinley0
    I did edit the sys.txt after installing. It is just weird that I can't access the settings. I believe If I can access the settings, I can get it working. I have a FT90BT also. I am wondering if the GPS is off but again I can't get into the settings. Any other ideas? I may just clear out the flash dish and try again. Thanks for the suggestions! Jimbo
  3. Jfinley0
    Hi Ryar: I backup my current My Flash Drive which has AvicNet and then I deleted it to install Avic 2.1 that you have posted on page one. Couple of issues came up: 1. I am some trouble loading the maps under Avic 2.1. I did copied over the maps and licenses. When I finally got to the navigation screen, Some of the buttons on the screen did not work such as settings etc. So I can't make any changes to the navigation. 2. I have access to AVIC radio programs but It does not highlight the buttons for Navigation and System settings (it is greyed out). So I ended up deleting the flash d
  4. Jfinley0
    Can you post Avic2.1 files so I can download it? I went to the site to get the files but was having troubling get in. Then I can test it to see if have the same problem. Jimbo
  5. Jfinley0
    Hi Chuck: I have my own mod that I have added thing to over the last couple of years. It is based on Stan/Andr mod. Would I able to add smartzoom to my mod and if so what would the steps be to add it? Thanks Jimbo
  6. Jfinley0
    I looked in the User\userdata\igo\save\userlists\navigation_83.txt and ther is a line there that says: Primo 2.0;;\\my flash disk\\apl2\\primo3\\run\\run.exe;;icons/igoprimo1.bmp#3;0;0. So I am guessing that it can't find icons/igoprimo1.bmp#3. Where would I find to see if that is in? Jimbo
  7. Jfinley0
    I am sorry. its says nothing about apl4. It just says "unable to open icons\promo1.bmp#3 Thanks Jimbo
  8. Jfinley0
    I was unable to open navigation when starting. It says "unable to open apl4/icons/igopromo1.bmp. I can't find the icons folder. Can you point me in that direction? Thanks Jimbo
  9. Jfinley0
    I still get the same error message as above. I think Ryar has to do some modification but not sure what. Jimbo
  10. Jfinley0
    I had the same problem and found out it was missing the Primo application button. I added that to primo folder and the next error I got was fail to load igo9/800_480 main.ui Jimbo
  11. Jfinley0
    Hy Ryar. I ordered the ELM327 USB reader and waiting for it to come. When I do I will let you know how it works for me. Did you buy the full version of HOBD for $21? Thanks Jimbo
  12. Jfinley0
    Hey Ryar: I tried it and it works! I upgraded the to CE6 and reinstalled AvicNet and my golly it works! Now I am going to try just Avic with primo and see if that works. I will give you an update after I am done! Jimbo It did work with standalone Primo. Great find and great job Ryar! Jimbo
  13. Jfinley0
    Hi Ryar: I installed Primo and not the AvicNet. I would like to add Avicnet 9xx GPS Fix.rar. I did try to do it but it did not install on Primo I am running Primo off the IGO8 instead of the SD disk. It did work for me on the AvicNet when the truck was not moving. Can you make a copy for just Primo and not AvicNet? Thanks Jimbo
  14. Jfinley0
    Had it today and not fixed yet. Should I stop the truck and then load Primo? It does show all green bars after a few minutes. Jimbo
  15. Jfinley0
    I downloaded the file and I will report back what I find out. Thanks Ryar! Jimbo
  16. Jfinley0
    Ok. I changed the sys.txt to port 6 and the baud was already set for 9600. This time is says "Looking for GPS" I got at least 9 green bars with 10 bouncing around at read. It did show up the City of St. Paul and show some of the street names. But I went no farther. One thing I noticed while I had Primo up and running, I was able to hit the "Map" button on Avic and was brought back to the navigation screen on Igo8. I thought when I load Primo, it suppose to kills IGO8. Is that true? That all I have for you. Sorry! Keep up the great work as I really enjoy modding around! Any idea what to do
  17. Jfinley0
    No... It show Buildings and says "Auto detecting GPS".
  18. Jfinley0
    I have af90bt with 3.1 or 3.02 firmware with both hardware bypass and ground speed wire. I do have problems getting the gps working on both on Avicnet and primo. Jimbo
  19. Jfinley0
    I am having the same problem with Primo. I got the GPS working once but now all is showing is "Auto detecting Satellite". I tried deleting the Save folder inside Primo and also under My flash disk\user\primo. I tried all different sys.txt to no avail. Jimbo
  20. Jfinley0
    Done!
  21. Jfinley0
    [ HI Ryar: Great job on the language changeover! NOw the question is where can I get link for OziExplorer, TomTom and Garmin Maps? Thanks Jimbo
  22. Jfinley0
    Cool... I am downloading it right now.... I will check in later! Jim
  23. Jfinley0
    Thanks I got it working. I will let you know how everything works. Thanks Again Jimbo
  24. Jfinley0
    I tried it and error message came up for line 26 testmode 1? I believe it is in the start.ui.. Jimbo
  25. Jfinley0
    I would like the files to work for Andr/Stan Mod that I built up over the last two years. I can run mine off the SD card but would like to incorporate into my own mod like Chucks. Can you help me there? Jimbo
×
×
  • Create New...