adarkol

This is an awesome app... too bad someone from Pioneer wont recognize this and maybe add it into AVICFeeds... Hhhhmmmm whatta concept!!! I like it!! Pssssttttt Pioneerare you reading this? lol

unfortunately for you... 2005 is the last year of the din and three-quarter opening. In 2006 on up they switched to the doubledin with the bump out on each side. That one will easily accept a double-din deck but you must purchase a new dash bezel from the dealership, it has to be the navigation bezel should be priced around $175. You can get a double din into your truck (I have done it if I can find the pictures I will post them) but it takes major modification of the factory dash bezel and sub-dash area, which is far more indepth of an install than what the average Best Buy would be abl

it thinks that it is a video input... because it is a video input please dont bag on pioneer because you didn't RTFM Bwahahahahahahahahahahahaha!!!!! ROTFLMFAO!!!!

Everything that 1loudls says is accurate... I have a Viper Remotestart as well and I actually use it everytime I get into my car to get the AVIC booting up so I get in and the music is playing Your other option is that since this is an occasional thing you could also use a standard Bosch SPDT relay and a normally open momentary switch to interrupt the acc wire on the AVIC to force it to reboot without having to loose all of your settings The relay will have 5 terminals on it they will be labeled as 30, 85, 86, 87, 87a cut the ACC wire behind the radio don't cut it too short cause you

The reason that you are not getting AM reception is that the vehicles with the roof mount antenna have an AM antenna that needs to be turned on... One antenna is for AM/FM the other is for Sat radio or radio data information depending on where your car is built for... Basically you need an adapter that has a 12v injector on it and that is what will turn on the AM reception Scosche makes a part that will do this for you (I assume that your A4 is a 2000 or newer) the part number is VWA4B this should do the trick for you!! Let me know if you have any other questions!

I"m in GB but don't want to be responsible for brickin your unit... if I damage mine its my own fault... but if i damage yours and you are paying me to work on it I am liable... I know what I am doing and not at all do I question my abilities... its just hat the possibilities are there What are you looking to do?

The only reason that they don't talk about compatibility with the SIR-PNR2 is that this unit is no longer produced and is replaced by the SCC1 and Pioneer translator... The SIR-PNR2 can still be purchased through some retail outlets but it is a gone when gone unit... when they are sold out there are no more!!

Has anyone used the POI expansion card for this unit? Has anyone tried to use it on multiple units? I have a customer that put this unit in more than one of his vehicles and he really doesn't want to have to buy two cards...

One "R" please My bad... the phone at work was yelling at me!!

Dear Two Idiots, Alright here it is... first off I will apologize in advance it has been awhile since I have worked on one of these so some of the details might be a little fuzzy... Dont be discouraged the new canbus networks suck I don't care who you are!! First find the amp and get to it... I think it is above the glove box towards the radio it is behind a plastic panel and is a pita to get to... the amp will have two plugs that plug into it one is the input and power connections the other is the speaker leads. Here are all the outputs from the amp Speaker 1 FL+ DARK GREEN/YELLOW C

So if the software bypass does not work.... My question is will the wire bypass still work? I assume it will but I just would like confirmation before I upgrade! Both bypasses work, in exactly the same manner as before. Excelent!!! Thanks for the input Borris!

A BAT!!! Read my sig, I got more then a bat, I would love to catch one of these bastards. It wouldn't even have to be my car. I would just like to catch one breaking into anyone's car. A Factory alarm is just a glorified noise maker!!! Even Aftermarket alarms are only good if people pay attention to them... I had my AVIC-D3 stolen out of my car in my work parking lot, it is in a mall area which is very high traffic (people and cars) I have a high end pager alarm on my vehicle. Teh sad news was that my keys were in my toolbox and by the time I heard the pager going off and got out to

So if the software bypass does not work.... My question is will the wire bypass still work? I assume it will but I just would like confirmation before I upgrade!

I will be purchasing the update on payday but I have multiple units to upgrade... and now I have to figure out which one I want to upgrade cause $70 per unit kinda sukx... So I will have a legit copy but I want to be able to put it on multiple units of mine if possible!

Of those of you that got it today... Did anyone install it yet? Does it look like you will be able to install it on multiple units? Has anyone tried to install it on multiple units? Is it all its cracked up to be? If it requires a product key and activation... has anyone tried to build a keygen? Just curious... I know that I am not the only one thinking these questions! Thanx