Chuck88

As I said couple of posts up ... I unrar the AVIC_F900 v322 nowarn.rar file and replace existing files in the APL folder without issue, everything is working fine. Latest update is: upd 15.12.2009 update for 3.020200 version, UC or EW. AVIC_F900 v322 nowarn.rar (292.66 KiB) Downloaded 704 times

I have the Nav Nag Msg hack installed. The "Debug Mode Settings" replaces the normal System Info screen. I will check without the nag msg hack sometime this weekend and let you know.

Test drive results ... I hate to always bring up problems but here they are : 1) Menu->Settings->System Settings->Sys Info (Debug Mode Settings)->Return Key->Phone Menu or Contacts List ( ) With 1) performed, continue on 2) below ... 2) Map->Settings Icon (Navi Settings)->Return Key->Debug Mode Settings ( ) 3) Menu->Destination->Route Functions->Load Route->Simulate: now pressing either STOP or CANCEL ROUTE will return to the Nav Settings screen, while it supposes to return to the map. 4) Also the first time when start to simulate a r

Hey MisterBlue, if you have question please PM me and I will explain in greater details (français) . Please also see last post on page 2 of this thread?

Really appreciate that Abb ... Kudo to you

Nah, still have to take pics which I have to do in my car because of Sirius and FM which I do not have antennas for in house Got it from 4shared.com. Thanks.

For me there is nothing abnormal. Whether or not a route on map, when you select a favorite from the "Cursor Menu", the cursor appears at the location of your favorite, you validate if you want to change the destination point. Well, not quite that ... AfterI LOADED a saved route, then I select an entry in either FAVORITE or HISTORY, the cursor is not shown in the saved location. The screen only shows the current LOADED route, even if the FAVORITE location is 100 KM out of the current route. The address of the previous SAVED location is however shown. Please note that this prob

Did you see last post on page 2 of this thread?

Alright thanks. I will take it tomorrow then. Good night!

Are you doing the posting now? I would wait and upload both of them at the same time tomorrow to my AVIC.

WOWWWWW, I like this much better than the previous one, especially the Destination graphic I used to replace your main menu graphics but I think that I will let them as it with this new one

it is done and looking good, I just have to find the time to take pictures and post it. Posting all these mods takes more time than the actual mod updates themselves Lot of changes?

Test drive tomorrow ... Any word about your Chrome theme update?

Some other observations: 1) If I load a saved route, the AVIC ask whether it is OK to start the navigation from the saved GPS position. Without regard to whan I answer (Yes or No), it always starts the route from my current position to the saved destination. 2) If I already have a route plotted, and load a favourite location, instead of showing me the loaded GPS position, it simply shows me the current route (!!!). If I press the ADD DEST, the route is however plotted correctly. My description might not be accurate to 100% but that is what I saw ... Is there anything to do wi

Hi MisterBlue, thank you for your answers to my two new questions . However, after deleting the 3x .SAV files and 1x System.ini file, when returning from work today, I still have the strange behavior. I think that you have to enter the Multiplan mode within a couple of seconds after a voice guidance prompt to reveal the strange behavior (multiple repeating). I think that I have a clue for that: when you get into the MultiCalc or Multiplan mode, you get up to five routes being computed, so the AVIC stores in its memory one voice command for each calculation; and it does make senses, be

Can somebody tell me what is "Zoom in after find" under Smart Zoom menu? And how about "Restore Smart Zoom" after 10 seconds? Thanks.

Search my friend, search and search again, this is how you find info. Most info are available in different places in this forum. For the file that you are looking for, one of the versions is here: http://avic411.com/forum/viewtopic.php?f=64&t=27989

Well, I wish you best of the lucks for your upcoming interview and please come back ASAP when your situation permits .

Hey Welcome back IDT. Hope that all is well with you . Your excellent mods have been served as fundation for so many other fine pieces of work. Just passing by or else?

Chrome everywhere is so nice looking, your duo for the nav mod and theme will definitely be in my collection of mods for the whole time that I own the AVIC. Thanks again for your efforts Abb .

I will do the cleanup today. It is nice to know which file to delete. Thank you for the efforts of sorting this out for all of us .

So I guess my preferred route type must be set to "Short", that is why I cannot uncheck it, right? I will verity that because I rather have it "Fast" instead. No I didn't delete the 3x .SAV files and 1x system.ini , because I thought my previous mod is Abb's excellent modified version of IDT Skin #3, the latter is where your mod is built upon, and they should be compatible. Do I have to delete them? And yes, this morning I still have the annoying many many voice prompts when I have route, and get into the Multiplan screen. Please check!

Thanks for the details ... Checked and unlchecked OK but how about a solid box? I have experimented that I cannot unchecked the Short Route, even when other types of route are presented and checked. Any clue?

Abb, do you have a graphical screen to show multiplanned routes in your mod? If so, how to access it? Thanks.

A small problem: when you are navigating with route and get into the MultiPlan (Route Functions), the navigation directive keeps repeating at least 4 or 5 times, which is very annoying ... anybody sees this problem And during related screens, the voice repeats all the time!!! Also, can someone show me how to select one of the 5 routes (Fast, Short, Eco, Scenic, etc)? What that means when the selection box is checked, opaque or box with hole? It doesn't seem to work properly or I don't understand its behavior. Thanks.