Jump to content
AVIC411.com

RonS

Moderators
  • Content count

    1625
  • Joined

  • Last visited

1 Follower

About RonS

  • Rank
    Established Member
  • Birthday May 30

Profile Information

  • Gender
    Male
  • Location
    Belleair Beach, Florida

Recent Profile Visitors

14294 profile views
  1. Nope. No idea about Aus maps or where to get them. You might have to find your local Pioneer web site and buy them. Maybe someone else has a better idea.
  2. It should, but I don't have one. Running this won't hurt - so go ahead.
  3. Although I can't read the message, I've never seen that screen. I have two thoughts. It is possible that commando's navi.exe file did not patch all the calls to "nag" screen instances. You could manually copy my patched navi.exe to both prg0 and prg1. Sometimes weird things happen after a firmware update. You can do a hard reset by disconnecting the battery for ~30 seconds. If neither of those fix it, I've got no ideas.
  4. I have the same hardware (Z110) and i use a wired iTouch with the 30pin connector. I have never seen a nag screen using my iTouch. Are you using the iPod app (source) or are you using App Mode?
  5. Looks like they removed them from Navigation.com web-site. Their link does the same thing. Here's the files: Pioneer_2017_maps-Z110-CRD5009A.pdf Pioneer_2017_maps-Z130-CRD5006A.pdf
  6. Did you replace the Cardinfo.cif file on the SD? The one in the ZIP is for Z130 or Z140
  7. I never used App Mode - didn't even know it worked with a nano. I can only suggest doing a hard reset by disconnecting the car battery for a couple minutes. This often cures odd behavior after a firmware update.
  8. What do you mean? how is your iPod connected? Did you try AV System Settings/App Connection?
  9. Hold the eject button for about 5 seconds. You might need to cycle the power while holding the eject. BTW, if you got that error you did something wrong. Do not modify any files on the SD except cardinfo.cif (if necessary). BTW, the instruction in that link are to restart the install. The way to abort the install is - put the super testmode.key on a SD or usb, put that in, and it should boot to testmode. go into file maintenance, and remove the file: USER\SYSTEM\Download\StartKnd.log this will kick the unit out of upgrade mode, and should restart into regular mode on next power up (remember to remove the TestMode SD).
  10. Avic F930BT

    Try turning off Demo Mode in the Navi Settings menu. Download the manual pdf from Pioneer's web site. It is easily searched.
  11. [X930BT] - Password Recovery (obsolete)

    Yeah, it's really tough to find the easy way. Did you see the thread at the top of this sub-forum?
  12. No rocks, but: #1 Whoever figured out that old hack (pionera???) doesn't seem to be around anymore. So the shortfuse hack worked and will probably always work for these old units. On that other hardware, you are on your own. #2 Yes. Jason rehosted and converted to a newer BB software. I guess some things didn't (or couldn't) get ported. It does seem to have severly cut down on spammers, but that's the only thing I like about it. But nobody asked me.
  13. Avic X920BT upgraded to X940BT stuck at version 5.

    If it works now, it will work with 5.1. That was a patch to 5.0 to fix some issues with Apple Lighting support. BTW, it is still on Pioneer USA's site: Software Downloads Scroll down to X940 5.1 update. Read the instructions before installing.
×