ADE

I had this happen to. Make sure you extract all files when you download the zip file to your computer (I saved them to my desktop and moved them to the SD card. This ensures they are on the top layer of the SD card and when you put the card into the unit it should start automatically. Hope this helps.

Thanks for the information. I'm checking to see what I need to do to send it back for warranty repair. Gotta get a reciept. any help?

Thanks I read the same thing in the manual but a pioneer tech told me the opposite. I'm still trying to figure out my problem, the gps antenna was just replaced and the tech now wants me to disconnect the vss wire. Something the manual says should be hooked up for better accuracy. I'm about ready to sell and move on.

no green satelites on the x920bt

You can also go to a hobby shop and buy a male end (genrally used in the harness of servo)and just repair the wire. Someone at the hobby shop may even fix it for you as they do a lot of repairs with these small wires. I repaired mine that and it works like a charm. It would be a lot less expensive too!

Does anyone know what the orange and yellow satellites mean? Should there be any number next to the yellow satellite? When driving, I sometimes will see the number between 10-12 next to the red satellite and some 1 next to the yellow satellite. Usually its 0 next to the yellow satellite. I wonder if this is my problem. Thanks

"Normal" just doesnt seem right. I've had several "OEM" in-dash systems in the past and none exhibited this problem. When talking with Pioneer, they never mentioned its normal. I'll try a total reset this week and see if it works, if not, I'll just send it back for warranty service.

any suggestions?

Hi new to the board and Pioneer. I recently installed a X920BT and the when using the map screen the indicator (red triangle) is inaccurately displayed on the map. When I pull up to an intersection, it shows me on the map not quite at the intersection. When I turn, it looks like I'm turning into someone's front yard and then the map clicks and I on the street again. When traveling, I'm usually past a street or overpass before it shows on the map. I also noticed that sometimes it doesnt even show the surrounding street names. I moved the GPS antenna the roof of the vehicle about a week ag