gleal17

i did this 1. Insert SD card into AVIC and turn it on. 2. When the pioneer logo comes up, press and hold the menu, map, eject and the reset buttons at the same time. When your screen goes completely blank, let go of the reset button but continue to hold menu, map, and eject buttons. This will bring you to a blue screen, telling you to reset the unit (ignore this), you will have to enter the service combination. Press the volume knob in this sequence and you will see * signs for each push: Up, Up, Down, Menu, Left, Right. 3. Select Wince Upgrade 4. Select Update SD Format 5. Wait until

i did this 1. Insert SD card into AVIC and turn it on. 2. When the pioneer logo comes up, press and hold the menu, map, eject and the reset buttons at the same time. When your screen goes completely blank, let go of the reset button but continue to hold menu, map, and eject buttons. This will bring you to a blue screen, telling you to reset the unit (ignore this), you will have to enter the service combination. Press the volume knob in this sequence and you will see * signs for each push: Up, Up, Down, Menu, Left, Right. 3. Select Wince Upgrade 4. Select Update SD Format 5. Wait until

thats exactly what mine started doing im still waiting to see what people respond to my post if they can figure it out ill let you know.

i have a pioneer f900bt that out of no where rebooted itself one day and has stayed rebooting on the initial pioneer screen, already tried to reinstall the software and will let me get into test mode and make changes, but after all still does the same. can it be the processor or something else. why would it do that out of no where.

Ne figureIs it out post quick mine did the same tryied to put the 3.1 udpate but all it does is get stuck on the pioneer screen looks like its trying to load but.then reboots trying it right now again hope its not serious.

Ok so I have a f900bt that crashed a week ago I didn't have anything saved and couldn't find any back up files so I decided to put this. Into my system to see if it would bring it back to life but after downloading it twice and instaling it twice it let's me select the language and nav voice it restarts but stays on the pioneer screen and keeps rebooting.. what might be the problemhas anyone ecountered this

My f900bt took a dump on me n all I'm asking for are some backup files can anyone me out.

im trying to load 2.006 back on to my f900bt get through to updating winCE i put the sd card with the test mode folder and reset then it tries to start like normally but the unit just turns off nothing happends test mode doesnt even come up. ive been on test mode in the past when upgraded to 3.00 am i doing something wrong