cwirth

Actually they do make a double din kit for the Lexus RX350. It is actually for the JDM Toyota Harrier which is the equivelent vehicle to the RX350 in Japan. Now where to find one is the question since it is a Toyota of Japan part. Someone that has installed an aftermarket double din radio in an RX that was on a Lexus owner's website said he found one on Ebay. Probably don't come up very often I bet.

I was wondering if the D3 can be installed in a 2007-2009 Lexus RX350. I have one installed in my Toyota Matrix. I saw this post of someone that installed a Z1 in a Lexus RX330 (similar model) and it looks good. It seems to have the same spacers to the right and left of the radio like I am using in my Matrix. http://avic411.com/forum/viewtopic.php? ... ight=rx350 The factory nav is $2000 and Lexus has it locked so you cannot use the nav while driving. I may also consider buying a late model used RX350 and the ones I have been seeing do not have nav. I figure that if the D3 will fit tha

I have been thinking about purchasing a used 2007 Lincoln MKX. This vehicle has a factory navigation with Sirius. I already own a D3 with the XM tuner and love it. I was wondering if any of the installers here knows if the D3 can be installed in the MKX without too much difficulty. Are any installation kits available?

Is there any updated XM logos for the D3? I found a new channel on XM, channel 59, XM Led, all Led Zepplin and other new channels that do not have logos. Is there a way to down a file so I can burn it on my copy of the Avic disk so these logos will appear instead of the default (((XM))) logo?

Play_Her: Nice photos. Can you do something for Toyota? Thanks.

Well I replaced the 920XM tuner as Pioneer suggested with a new unit and today it started again. When I lose the signal because I am not in the clear and then come back in the clear the D3 shows a good signal with channel number and everything but there is no audio. This time I pulled over and left the car running. I turn off the radio for a minute or two then back on and still no XM audio. Of course when I turn the ignition off then on everything was fine. It definiately has something to do with switched 12 volts and the only thing that is getting that is the D3. The 920 only receives con

Yes, that is exactly what happens to me. I have to turn off the car to get the 920XM tuner to reset. I called Pioneer tech support and they said that they never heard of that problem and suggested that I return the unit to the retailer since it was less than 30 days old. I have another one coming. If this does it too then Pioneer has a problem with their XM tuners.

So nobody has had a problem with the Pioneer GEX-P920XM tuner?

Something isn't right with XM and the D3. It just happened again. I just drove up to the front door of a hotel to drop someone off and there was a roof covering the entrance I lost the XM signal which didn't surprise me but then when I drive away the signal came back and the display showed the channel, song title and artist but no audio at all. I then turned off the D3 and turned it back on but still no audio. The only way to get it back is to turn off the car. There is definately something wrong here. I don't know if it's the D3 or the 920 XM tuner. I have no problem with the audio from AM

I recently installed my D3 and have had this problem occur twice. It seems that when listening to XM the audio will break up kind of like when the signal is fading in and out then no audio at all. The display is fine. It shows the change, logo, song and artist just no audio. During this time I can change to FM or CD and they have audio. What I did both times was to stop and turn the car off then back on and everything was fine. What I didn't do was to turn off the radio then power it back on without turning off the car. Will do that the next time. Any ideas on why this is happening? Thank

Ham radio would be cool. Charlie WB3DDF

I would like to have a Toyota background also like the previous poster mentioned. Sure would appreciate if someone could create it. Thanks.

Can someone create a background like this one except using the Toyota emblem?

What is the screen on the D3 suppose to look like when the unit is off? I see the clock up in the top left corner but the rest of the screen is not black. It is more like dark gray with some horizontal white lines running through it. Is this normal? Is there a contrast or other control to make the screen all black?

That did it. Thanks.