big-fokker Posted May 1, 2008 Report Share Posted May 1, 2008 I can't figure this one out, but what cables do I need to connect the P10 (Nav Traffic XM unit) to my Z1? I saw one diagram that said just the antenna and IPBus/power harness. Then I see there is a data cable included as well? If anyone has a Z series with this Nav Traffic unit, let me know what I need. Thanks, Quote Link to post Share on other sites
whtcrxghst Posted May 1, 2008 Report Share Posted May 1, 2008 You need the data cable for NavTraffic only Quote Link to post Share on other sites
big-fokker Posted May 1, 2008 Author Report Share Posted May 1, 2008 Sounds good...thank you Quote Link to post Share on other sites
smooth_caramel Posted May 7, 2008 Report Share Posted May 7, 2008 Is this also true for a D1? I know I need a data cable, what else? I got no power harness either. Quote Link to post Share on other sites
whtcrxghst Posted May 7, 2008 Report Share Posted May 7, 2008 Harness, Data Cable, P-bus Cable, and Antenna Quote Link to post Share on other sites
smooth_caramel Posted May 8, 2008 Report Share Posted May 8, 2008 what? dang.....im better off just getting a new one and putting this back up on ebay! Quote Link to post Share on other sites
smooth_caramel Posted May 9, 2008 Report Share Posted May 9, 2008 Harness, Data Cable, P-bus Cable, and Antenna What is the p-bus cable for? Quote Link to post Share on other sites
whtcrxghst Posted May 10, 2008 Report Share Posted May 10, 2008 Its how the deck communicates with the tuner Quote Link to post Share on other sites
smooth_caramel Posted May 10, 2008 Report Share Posted May 10, 2008 I thought that's what the data cable was for. Quote Link to post Share on other sites
whtcrxghst Posted May 10, 2008 Report Share Posted May 10, 2008 The data cable is for traffic data. Trust me, or read the instruction manual, it comes with all of those for a reason Quote Link to post Share on other sites
smooth_caramel Posted May 11, 2008 Report Share Posted May 11, 2008 ....didn't get one. got one? Quote Link to post Share on other sites
whtcrxghst Posted May 11, 2008 Report Share Posted May 11, 2008 I certainly do. But you will have to download yours for free http://www.pioneerelectronics.com/PUSA/ ... 0XMT?tab=D ....didn't get one. got one? Quote Link to post Share on other sites
sir Posted May 27, 2008 Report Share Posted May 27, 2008 Harness, Data Cable, P-bus Cable, and Antenna There is no need for the power cable as long as Data Cable and IP-Bus Cable are connected to the Z1/2/3. So will be neccessary to have connected XM Antenna, Data Cable(out) and IP-Bus (out) Cable. Quote Link to post Share on other sites
whtcrxghst Posted May 27, 2008 Report Share Posted May 27, 2008 Thats incorrect. You still need power and ground hooked up There is no need for the power cable as long as Data Cable and IP-Bus Cable are connected to the Z1/2/3. So will be neccessary to have connected XM Antenna, Data Cable(out) and IP-Bus (out) Cable. Quote Link to post Share on other sites
sir Posted May 28, 2008 Report Share Posted May 28, 2008 This is a copy and paste text from http://www.crutchfield.com/App/Product/ ... ailed_info Wiring Note Power Wiring: If the unit is connected with an IP-Bus cable, it is not necessary to connect the red (+12 volts switched) power lead. The receiver may not work properly if the IP-Bus cable and the red power lead are used together. The Installation Manual incorrectly states that both leads should be connected. A manual correction sheet is provided ................................................................................................... Looks like the power does not have to be connected when IP-Bus is being connected. Did anybody installed the unit just with IP-Bus cable and no power cable connected? Thanks. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.