Jump to content
AVIC411.com

2006 Ford F-150 Install Help!


Recommended Posts

ok guys im going to be getting a avic d3 for my truck. i was wondering what i need to do the install i believe i need...

1. wire harness

2. trim kit

3. antenna adapter.

 

now i was wondering where can i get those from? and suggestions or recommendations? what brands?

 

also does anyone know what color wires the vss, reverse light, parking brake are and where they are located? anyone that could help or that has done the install and has advice or info would be greatly appreciated.

Link to post
Share on other sites

Speed Sense GRAY/BLACK (AC) PASSENGERS SIDE FIREWALL 70 PIN CONNECTOR PIN 63

 

Reverse Lights BLACK/PINK (+) DRIVER KICK PANEL IN A GRAY CONNECTOR PIN 13

 

Parking Brake LIGHT GREEN/RED (-) AT SWITCH HARNESS ABOVE PARKING BRAKE PEDAL

 

dash kit-Metra 95-5812

wiring harness- Metra 70-5520. or 70-5521 if you have factory sub

ant adapter-Metra 40-cr10

Link to post
Share on other sites
Speed Sense GRAY/BLACK (AC) PASSENGERS SIDE FIREWALL 70 PIN CONNECTOR PIN 63

 

Reverse Lights BLACK/PINK (+) DRIVER KICK PANEL IN A GRAY CONNECTOR PIN 13

 

Parking Brake LIGHT GREEN/RED (-) AT SWITCH HARNESS ABOVE PARKING BRAKE PEDAL

 

dash kit-Metra 95-5812

wiring harness- Metra 70-5520. or 70-5521 if you have factory sub

ant adapter-Metra 40-cr10

 

What he said, except you can find the VSS wire in the factory radio harness, gray/black wire. Just went through this install myself.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...