motoxfmx27 Posted June 19, 2008 Report Share Posted June 19, 2008 So...I just recently finished installing my Pioneer AVIC-D3. I also installed the Metra GMOS-04 (Bose and OnStar) harness and PESWIPS steering wheel control harness. I know (as far as I know) I soldered all the correct wires together. Now, the only time I get any audio through my speakers...is when my door is OPEN. When I close my doors and/or start my truck, all audio is muted. I get absolutely nothing at all. Does anyone here have any suggestions on how I should go about fixing this or what is causing this to happen? Quote Link to post Share on other sites
deadlyap1 Posted June 19, 2008 Report Share Posted June 19, 2008 sounds like you wired your mute/att wire to the door switch I would go back and check your wiring again. Quote Link to post Share on other sites
motoxfmx27 Posted June 19, 2008 Author Report Share Posted June 19, 2008 Actually, man...I just went back and rechecked my wiring. I didn't wire my mute switch AT ALL. Maybe this is my problem? Quote Link to post Share on other sites
Jahntassa Posted June 22, 2008 Report Share Posted June 22, 2008 Does the AVIC stay on? It sounds like somehow the amp turnon isn't hooked up correctly. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.