memsu Posted February 21, 2009 Report Share Posted February 21, 2009 So, I updated the software using the CNDV-80MT download. the system seemed to update just fine. After the update the system did not work. the screen says please insert approprate disk. Now nothing works at all. When I load a disk in the system, the system checks it then rejects it. Any help would be great! The AVIC-D3 has been tossed in the trash! I now have a AVIC-F90BT. The unit does not need any more of those f-ing disks. I can update the system via SD card now. I'm going back to the D3. I've had a F90BT for 2 weeks and can't stand the boot up times. The back up camera is useless, because it takes so long for it to come up. The D3 is a more polished navigation/audio system than the F-series in my opionion. Quote Link to post Share on other sites
smoove7410 Posted August 12, 2009 Report Share Posted August 12, 2009 God, I hate this thing. I have had pretty much the same problem as said above, but with the factory disc! At first, it would not load, but would let me use the radio/ipod. Then, the map eventually started coming up, but I had the problem described with some of the buttons not working (search by address etc.). Now, I tried to change the language, and when it reset, it rejected the factory nav disc, the only disc that has ever been used. Any ideas guys? I am at my wits end here trying to get this thing to work. Quote Link to post Share on other sites
RickNC Posted August 18, 2009 Report Share Posted August 18, 2009 wow......this is all disheartening. Has anyone had a positive experience at all with this update? Quote Link to post Share on other sites
jtmobsta Posted October 23, 2009 Report Share Posted October 23, 2009 I noticed that when I stick in my navigation dvd, it wont read.. it tries to read and then "clicks" and does so maybe 4 or 5 times and then gives up.. but when I put in a music CD, the system automatically restarts as if it were going to update. If only there was a way to burn maybe a firmware update or just the update from the navigation onto a regular CD and update the navi through there Quote Link to post Share on other sites
cafagna Posted October 27, 2009 Report Share Posted October 27, 2009 I just upgraded to the CNDV-90MT from the 80MT on my Avic-D3 and is has appeared to correct all the previous issues (clicking and read errors), not to mention that Pioneer actually put the XM / Sirrius icons on this disc. My D3 is like new again with no read errors and also seems to be starting up a lot quicker. Maybe if you call and complain to Pioneer they will exchange the 80MT for a 90MT if it was recently purchased... If you bummed it for free... try the 90MT... just a thought. I still think the AVIC-D3 with all the options is a better unit than any of the new Pioneer models. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.