InMotionJosh Posted February 28, 2009 Report Share Posted February 28, 2009 Ok well I wired up my wiring harness and will be putting the F90BT in my 08 Ford F250 tommorow. I want to run a few things by you guys and make sure I did everything right before I go ahead and put it in. I moved the yellow mute wire, I grounded it, the parking break lead from the other harness, and the ground all together. Will that be ok? I also need help finding the reverse sensor wire, and also the speed sensor wire. It says these must be hooked up for the nav to work properly. Any help is appreciated. Quote Link to post Share on other sites
jrdiesel Posted February 28, 2009 Report Share Posted February 28, 2009 VSS is Yellow/Blue at PCM. I have no info for the reverse wire. Sorry. Quote Link to post Share on other sites
InMotionJosh Posted February 28, 2009 Author Report Share Posted February 28, 2009 thank you...is the reverse needed? Quote Link to post Share on other sites
rareform Posted February 28, 2009 Report Share Posted February 28, 2009 only needed for backup cam. Quote Link to post Share on other sites
InMotionJosh Posted February 28, 2009 Author Report Share Posted February 28, 2009 Ok, in the manual it says something about it being needed for the NAV to be accurate or some BS....thanks for the help Quote Link to post Share on other sites
rareform Posted February 28, 2009 Report Share Posted February 28, 2009 only needed for backup cam. Quote Link to post Share on other sites
BorisM Posted February 28, 2009 Report Share Posted February 28, 2009 Ok, in the manual it says something about it being needed for the NAV to be accurate or some BS....thanks for the help VSS is needed for improving accuracy. Reverse for backup cam. It does let the unit know when you are driving backwards, but the effect on accuracy is negligible if any. Quote Link to post Share on other sites
JbOnly Posted July 31, 2011 Report Share Posted July 31, 2011 Ok well I wired up my wiring harness and will be putting the F90BT in my 08 Ford F250 tommorow. I want to run a few things by you guys and make sure I did everything right before I go ahead and put it in. I moved the yellow mute wire, I grounded it, the parking break lead from the other harness, and the ground all together. Will that be ok? I also need help finding the reverse sensor wire, and also the speed sensor wire. It says these must be hooked up for the nav to work properly. Any help is appreciated. Im doing the same in my F-250 2008 super duty. Any issues in fitting it? Did you have to buy a special adapter? Surround kit? Quote Link to post Share on other sites
1loudls Posted August 2, 2011 Report Share Posted August 2, 2011 Im doing the same in my F-250 2008 super duty. Any issues in fitting it? Did you have to buy a special adapter? Surround kit? yes you need to buy a dash kit, wire harness, and an antenna adapter, old radio comes out, new radio goes in, no fitment issues. Quote Link to post Share on other sites
1loudls Posted August 2, 2011 Report Share Posted August 2, 2011 if you cant find it anywhere else, the reverse wire is always at the back up light bulb in the tail lights. (which just happens to be right next to where you mount the camera) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.