Jump to content
AVIC411.com

jrdiesel

Members
  • Content Count

    127
  • Joined

  • Last visited

About jrdiesel

  • Rank
    Member

Profile Information

  • Location
    Edmonton, AB.
  1. I had CMH mod on mine, and I went straight to 3.0 with no problems. Just follow the instructions and BE PATIENT.
  2. jrdiesel

    peace out.

    Thanks Cmh928!! Amazing work.
  3. http://www.uploadjockey.com/download/34 ... part13.rar Hope this works.
  4. Try finding the XM antenna cable. And follow the cable to the tuner...? May take a while.
  5. On a 2007 Entourage: VSS = White/Black at Diagnostic Connector, Pin 6 Reverse lights = Red @ Rear Accessory Module (Rear Drivers Side, behind Panel) Hope this helps, good luck.
  6. Good call. How long does it take for the amp to cut out? Does it stay off for a bit and then come back on, or is it back on right away when the volume gets turned down? Will it play forever on 29, but cut out once it hits 30? Where is the amp, is there anything resting on top of it that could cause it to heat up more? How old and beaten up (abused) are the subs? Is it only when a hard/heavy bass note hits?
  7. Change to the Apple Ipod cable. I had a similar problem, but changed the cable and the problem has gone away.
  8. Wouldn't they ship the product with instructions?
  9. I agree about the amp possibly clipping, the gains may need to be adjusted down. Also, the amp may be over heating and going into thermal protection.
  10. According to other posts in the forum, no. But your F90 will be more accurate if you do.
  11. On the 2007 Equinox the VSS is Dk. Green/ White at the ABS module, Pin #3. Reverse is Lt. Green at drivers Running Board/ Door Sill. It may be the same for the 2005. Good luck. Hope this may help.
  12. VSS is Yellow/Blue at PCM. I have no info for the reverse wire. Sorry.
  13. I have the Touch Diamond (not Pro), I just updated the ROM last night. Today when the phone connected I had no issues, contacts and all (Home, Mobile and Work). The AVIC was still set up for the phone, and all I had to do was re-accept it. I had to use Jetware on my PPC-6700, but didn't need it on this new phone.
  14. But it isn't the ipod "cable", it was the Pioneer harness with the white plug. For me anyways.
×
×
  • Create New...