kevin1488 Posted March 18, 2009 Report Share Posted March 18, 2009 Ok so here is the deal and i have been doing my research i just want to know if this is right. I wanna add this feature to my existing data.zip file and i found this and this is what boris said. in SYS.TXT, find [debug] section and add a line, if it's not there: speedcam_enabled=1 Then: extract the file from the attachment to SD card and copy ui_pioneer folder to APL2\iGO. You will have settingXXX.ui files (to turn speedcamera functions on and off) and placeXXX.ui files to add/edit cams manually. So basically i am gonna take my sys.txt off my avic and add this line then copy the new sys.txt back to my avic. Then at this thread page 3 halfway down there is a setting.rar file you can download and the question is do i take the data.zip file that is already modified to my liking and overwrite the ui_pioneer file to the data.zip then put that back on my avic. viewtopic.php?f=34&t=19523&hilit=speedcam&start=30 And the obvioulsy do this Copy the two safety cam database files - "Red_Light_Camera_us.txt", and "Speed_Trap.txt" to: MyFlashDrive\APL2\IGO\Content\SpeedCam So the question i have is should this work adding all this to my existing data.zip that is mavs.... Quote Link to post Share on other sites
BorisM Posted March 18, 2009 Report Share Posted March 18, 2009 Ok so here is the deal and i have been doing my research i just want to know if this is right. I wanna add this feature to my existing data.zip file and i found this and this is what boris said. in SYS.TXT, find [debug] section and add a line, if it's not there: speedcam_enabled=1 Then: extract the file from the attachment to SD card and copy ui_pioneer folder to APL2\iGO. You will have settingXXX.ui files (to turn speedcamera functions on and off) and placeXXX.ui files to add/edit cams manually. So basically i am gonna take my sys.txt off my avic and add this line then copy the new sys.txt back to my avic. Then at this thread page 3 halfway down there is a setting.rar file you can download and the question is do i take the data.zip file that is already modified to my liking and overwrite the ui_pioneer file to the data.zip then put that back on my avic. http://avic411.com/forum/viewtopic.php? ... m&start=30 And the obvioulsy do this Copy the two safety cam database files - "Red_Light_Camera_us.txt", and "Speed_Trap.txt" to: MyFlashDrive\APL2\IGO\Content\SpeedCam So the question i have is should this work adding all this to my existing data.zip that is mavs.... I haven't seen what's in Mav's file, but if he did not change these particular files, you can safely add mine to the ZIP. If her did, you need to run a compare on them and figure out what needs to be merged in... You could try just adding a ui_pioneer folder in APL2\IGO with my files and see if everything works first... Quote Link to post Share on other sites
kevin1488 Posted March 18, 2009 Author Report Share Posted March 18, 2009 truthfully i am not really sure what i am doing with this mod i have done many of other mods just not to sure about this one can you suggest something or give me a step by step.... Thanks in advance.... Quote Link to post Share on other sites
kevin1488 Posted March 18, 2009 Author Report Share Posted March 18, 2009 So boris worst case i copy your ui_pioneer file over mavs one what would happen if i get you a copy of mavs ui_pioneer file can you compare yours and fix it accordinly... Quote Link to post Share on other sites
BorisM Posted March 19, 2009 Report Share Posted March 19, 2009 So boris worst case i copy your ui_pioneer file over mavs one what would happen if i get you a copy of mavs ui_pioneer file can you compare yours and fix it accordinly... I guess I could, but not before next week... Quote Link to post Share on other sites
kevin1488 Posted March 19, 2009 Author Report Share Posted March 19, 2009 worst case what would would happen if i just used your ui_pioneer file and saved my old one and restarted the avic. what do you think it would do or not do.... maybe i will try it today. Kevin Quote Link to post Share on other sites
BorisM Posted March 20, 2009 Report Share Posted March 20, 2009 worst case what would would happen if i just used your ui_pioneer file and saved my old one and restarted the avic. what do you think it would do or not do.... maybe i will try it today. Kevin Again... the easiest test: on the SD Card you use to move files around, create a folder ui_pioneer. Inside, 800_480 and common subfolders. Copy my scripts into them appropriately. Copy the entire ui_pioneer into APL2\IGO on the AVIC. If it works after you reboot, all is good. If it does not, go to test mode again and delete the ui_pioneer folder... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.