davenfish Posted November 17, 2012 Report Share Posted November 17, 2012 thanks to all for imformation i have a f900bt. was all good and now isnt !!! have tried this fix a couple of times and now i know my way around the unit etc i realise that i have the wrong files im in uk and these are the files that i think are wrong NN746UC_SDMLC_0_108009984.IMG ive used LPUE080 from pioneer website (think thats ok) also took winCE files from there ive used http://webdesignsfor...lash%20Disk.rar the euro back up for the disc image ive even got to update to 4.00 but unit just hangs on pioneer screen ive tried updating maps from here http://avic411.com/index.php?/topic/35351-european-2012-q1-teleatlastomtom-maps-complete-guide/ (europe maps) so my (begging) question is what sdmlc file do i use for uk and where do i get it please ? any help much appreciated thank you. Quote Link to post Share on other sites
davenfish Posted November 17, 2012 Report Share Posted November 17, 2012 all back up and running !!!! if you are like me and have the following IN THE UK avic f900bt thats hanging / rebooting then follow this http://avic411.com/i...o-files-needed/ a big thank you to tail24 and whirlwind !!!!! everything you need is there i tried this http://avic411.com/i...complete-guide/ but it put me back to square 1 !!!! so i reinstalled from whirlwinds / tail24 tutorial and im back it leaves you on firmware 3.00 and maps 2.00 once again big thanks to everyone who has spent time to help on here Quote Link to post Share on other sites
mikedude Posted November 20, 2012 Report Share Posted November 20, 2012 Hey guys, I'm new here, I've been reading a lot in this forum to solve my problem in my avic 9110bt EU unit and I think I understand enough now to do that, basically I'm just trying to restore it after a pioneer update that just gone wrong with the horrible red screen popping up with errors, so I'm gonna install something fresh and maybe even some mods. Problem just is the stupid fact that as an asshole I made the newbie mistake of not backing up my files, and I haven't been able to find EURO unit's backup files, and with the American ones system keeps rebooting with that awful message: "system starting up, please wait" all the time, and I still don't have the knowledge turn that around, but from what I understand with backup files from an euro unit I would manage to revive my avic. So, can anyone help me with that and somehow give me a backup of a EU unit? I would appreciated it a lot as I'm really tired of spending hours in the car trying to solve my mess and going nowhere, plus I'm a driver and work with my car, and the long hours without music suck like hell. Please help me! Thanks a lot Quote Link to post Share on other sites
tail24 Posted November 21, 2012 Author Report Share Posted November 21, 2012 The the files should work with all f900-90-700 series Quote Link to post Share on other sites
stephen426 Posted December 20, 2012 Report Share Posted December 20, 2012 hi, can someone tell me how long it should take for the winCEimg.cks file to give the restart message. Its been over 40 min now and it still says "read progress 100%" Thanks for your help Quote Link to post Share on other sites
nathanlw Posted December 26, 2012 Report Share Posted December 26, 2012 After ALOT of trial and error and advise on this thread and forum my f900bt is working.Still a few bugs I need help with though.I can not adjust the volume and The HU will not recognise my Ipod even thoough AV1 setting is set to I pod.This may be because I could not get a CD-IU230V cable locally so I bought a Scosche sneek peek composite AV cable.see here http://www.scosche.c...ch/product/1622 I assume this may be my Ipod concern.Has anyone used this cable with any success?As far as the files that got me this far I used the most up to date Testmode v2.3,wrote the SDMLC file,A backup file for a F90BT.( bought the unit bricked and this was the only backup I could find),and finally updated the firmware to 2.00600 from Pioneers website as well as the bluetooth V3.3 also from Pioneer.Major thanks and props to everyone for much needed info on this site.So can someone tell me how to get my volume restored? So close and I really like what I have seen with this unit so far.(being the HU I took out was an N3)Thanks in advance i also ran into this problem with the volume it will not raise or lower everything else works fine any ideas? TAIL24 plz email me if u have any ideas on how to fix this a text or call would be great 859 319 7866 or nathan whitaker886@hotmail.com thanks for all the help Quote Link to post Share on other sites
bayloadzone Posted December 29, 2012 Report Share Posted December 29, 2012 so I've reflashed the using the Win ce file many times, with the last being 2.0, but I keep getting the same black screen followed by the lights going out system, still stay running but nothing I put on the sd card will load. I have tried firmware updates, test mode file, but still get the same results I started with. Lights come on, no splash screen, then the lights go on, fan stays running. I can enter service mode, but that's it. Can anyone help me out, TIA Quote Link to post Share on other sites
mattj Posted January 8, 2013 Report Share Posted January 8, 2013 Just wanted to point some people to what helped ME after my US f90bt took a crash. First I had the 5 minute reboot and tried every single fix I could find. My unit would boot to the pioneer screen and hang no matter what update I did after trying to fix it. I used these insructions and i had to use the 3.0 update with those maps. It was the only fix to my solution. I spent probably 5 hours researching and 10 hours of updating my unit with every fix listed. Hope this can help someone in the future from a headache. A FRESH install may not be the answer to get your unit back up and running. Quote Link to post Share on other sites
mattj Posted January 8, 2013 Report Share Posted January 8, 2013 I'd also like to point out that I figured out if you are at the hanging pioneer screen, holding menu and map can force your unit to boot up in some cases. I was able to but the only thing I could get into was settings for language, etc... Quote Link to post Share on other sites
JstarHH Posted January 21, 2013 Report Share Posted January 21, 2013 ok, so I got winCE working properly, and put my backup flashdisk back on. Progress! It goes to the main menu, but stops on system startup, then after a few moments, resets. I read something else on here before about that, but i can't seem to find it again, but I'm continuing the search I'm having the same issue and I can't seem to fix the issue. Pretty frustrating to say the least. I'm at the point where I'm ready to remove the system and just go with something else. This will be the last pioneer item I ever purchase. Quote Link to post Share on other sites
kafarafa Posted January 28, 2013 Report Share Posted January 28, 2013 Hello, I have the F710BT in the European version, and now I think I tried everything. TESTMODE does not work. SD card: testmode WINCEIMG.BIN WINCEIMG.CKS I tried the: avic_f900_wince_v32_with_explorer.rar, installed avic_f900_wince_v32_with_explorer, WinCE is displayed but can not enter into any option, after a few seconds off at several times WinCE is displayed incorrectly, after a few seconds off: if anyone has met with something like that? please help Quote Link to post Share on other sites
cb28424 Posted April 20, 2013 Report Share Posted April 20, 2013 TAIL24 is the man!!!!! Thanks for the help man it worked great. Just have to figure out bluetooth and also cant access the system settings menu button is not lit. Im sure that will be easy compared to what my AVICf900bt started out doing..... Quote Link to post Share on other sites
Lepez Posted April 27, 2013 Report Share Posted April 27, 2013 hi guys... so i have al the files from the 8gb download, I only have one problem. when I start the wince format , the progress freezes at WritingImage 5% ... have tried lots of wince files , always the same results... any suggestions ? Quote Link to post Share on other sites
Lepez Posted April 30, 2013 Report Share Posted April 30, 2013 any suggestions? still no progress on the writingimage problem Quote Link to post Share on other sites
a11m1ghty Posted June 28, 2013 Report Share Posted June 28, 2013 While trying to figure something out, I had the SUPER DUMB IDEA TO PRESS FORMATMBR ... your thread got me back up and running. Though I needed to also load the Disk1 image, this helped me get on the right track with DiskRW. THANKS a lot! Frisco, I too performed the SUPER DUMB IDEA TO PRESS FORMATMBR move. What exactly did you do to resolve this? What's disc image 1? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.