Caustic Posted August 26, 2009 Author Report Share Posted August 26, 2009 can i use the old maps i was using with 2.0? the only reason i want this hack is becuase i live in germany but have an american unit. help a brother out! 2.0 was Igo 8.0. 3.x is Igo 8.3. So you should get 8.3 maps. Why use the old ones? Just get the germany.fbl for 8.3 and be done with it. -C Quote Link to post Share on other sites
HAAK31 Posted September 1, 2009 Report Share Posted September 1, 2009 when using the hacked ez-rider i have the problem, that my unit won't boot up no more. It does not even get to the starup screen. Then when i hit the resetbutton for about 5 seconds several times it finally comes back. I placed back my backup, without the hacked one and everything is fine again..I'm using the eu 3.01 version. Quote Link to post Share on other sites
tribuindu Posted October 7, 2009 Report Share Posted October 7, 2009 Hi everybody >>maybe this question is been answered 1000 times, I read i lot of post and i dont see theone that says how to use hacke ezider step by step is ok to dum it down. THANKS Quote Link to post Share on other sites
whoopidoo2 Posted October 7, 2009 Report Share Posted October 7, 2009 Hi everybody >>maybe this question is been answered 1000 times,I read i lot of post and i dont see theone that says how to use hacke ezider step by step is ok to dum it down. THANKS Replace your old EZRIDER file with this new one in the APL2/IGO folder Add the World License to your APL2/IGO/License folder. This will not overwrite your old license just add a new one. Quote Link to post Share on other sites
tribuindu Posted November 8, 2009 Report Share Posted November 8, 2009 yo thanx whoopidoo2 it worked like charm whoooooppiiiii Quote Link to post Share on other sites
ben_moo Posted November 24, 2009 Report Share Posted November 24, 2009 Sorry to jump in on this thread, but there is nowhere else I can find any info. This is the only site I could find about hacked versions of ezrider. I have an Eclipse AVN726EA, which uses iGo 8.3. The file it uses is ezrider_pna.exe. I've managed to unlock the unit (get into winCe) so I can browse all of the files. When I try to copy the new maps they don't show up, so I need either updated licences or a hacked version of ezrider. I have tried pre hacked versions which do work with the maps, they don't work with TMC and a couple of other things. I have also tried the hacked version of ezrider from here but it comes up saying that it need something else (or something like that, I can't exactly remember). Is it a Really big job to hack the file? Eclipse hasn't released any new maps yet and the newest maps available here for iGo are WhereIS, which is much better than Navteq where I live. So I would really like to get the new ones working. Thanks heaps in advance if anybody can help. Quote Link to post Share on other sites
BorisM Posted November 24, 2009 Report Share Posted November 24, 2009 Sorry to jump in on this thread, but there is nowhere else I can find any info.This is the only site I could find about hacked versions of ezrider. I have an Eclipse AVN726EA, which uses iGo 8.3. The file it uses is ezrider_pna.exe. I've managed to unlock the unit (get into winCe) so I can browse all of the files. When I try to copy the new maps they don't show up, so I need either updated licences or a hacked version of ezrider. I have tried pre hacked versions which do work with the maps, they don't work with TMC and a couple of other things. I have also tried the hacked version of ezrider from here but it comes up saying that it need something else (or something like that, I can't exactly remember). Is it a Really big job to hack the file? Eclipse hasn't released any new maps yet and the newest maps available here for iGo are WhereIS, which is much better than Navteq where I live. So I would really like to get the new ones working. Thanks heaps in advance if anybody can help. Most likely, Eclipse is also using a custom build of iGO for their unit. I doubt that Pioneer's build will work well for you, since it is geared to use Pioneer's hardware for things like TMC etc. Best bet would be to find an iGO hacking forum and ask somebody there to do a hack on Eclipse-specific build... Quote Link to post Share on other sites
ben_moo Posted November 25, 2009 Report Share Posted November 25, 2009 Most likely, Eclipse is also using a custom build of iGO for their unit. I doubt that Pioneer's build will work well for you, since it is geared to use Pioneer's hardware for things like TMC etc. Best bet would be to find an iGO hacking forum and ask somebody there to do a hack on Eclipse-specific build... Okay thanks anyway. I'll see what I can find elsewhere. The only place I can think of is PPCwarez. Do you guys know any other good sites? Quote Link to post Share on other sites
BorisM Posted November 25, 2009 Report Share Posted November 25, 2009 Okay thanks anyway. I'll see what I can find elsewhere. The only place I can think of is PPCwarez. Do you guys know any other good sites? May be also gpsunderground. If you can handle Russian, somebody on 4PDA.RU might also help (they did ours)... Quote Link to post Share on other sites
laci102 Posted November 25, 2009 Report Share Posted November 25, 2009 I would like to ask for assistance: I've got Pioneer AVIC f900bt types of apparatus (Hungary). The maps I would like to replace it, just the ezridert yet to be replaced or else I do? Thank you! Quote Link to post Share on other sites
vampirello Posted March 7, 2010 Report Share Posted March 7, 2010 Hi... I can not find the hacked ezrider and license file,the link posted above is not working more. Is there another link? Thanks, Vamp Quote Link to post Share on other sites
bigolyt Posted March 9, 2010 Report Share Posted March 9, 2010 The link is down... anywhere else I can get this file? http://rapidshare.de/files/48133221/ezrider.rar.html Quote Link to post Share on other sites
PigMan9080 Posted March 10, 2010 Report Share Posted March 10, 2010 I need the link to ezrider also plz Quote Link to post Share on other sites
bigolyt Posted March 10, 2010 Report Share Posted March 10, 2010 This is the one I'm using with 3.0 and it works with the teleatlas maps.... http://rapidshare.com/files/361207284/ezrider.exe Quote Link to post Share on other sites
beatnik Posted January 10, 2011 Report Share Posted January 10, 2011 Sorry to jump in on this thread, but there is nowhere else I can find any info. This is the only site I could find about hacked versions of ezrider. I have an Eclipse AVN726EA, which uses iGo 8.3. The file it uses is ezrider_pna.exe. I've managed to unlock the unit (get into winCe) so I can browse all of the files. When I try to copy the new maps they don't show up, so I need either updated licences or a hacked version of ezrider. I have tried pre hacked versions which do work with the maps, they don't work with TMC and a couple of other things. I have also tried the hacked version of ezrider from here but it comes up saying that it need something else (or something like that, I can't exactly remember). Is it a Really big job to hack the file? Eclipse hasn't released any new maps yet and the newest maps available here for iGo are WhereIS, which is much better than Navteq where I live. So I would really like to get the new ones working. Thanks heaps in advance if anybody can help. hi ben_moo, I have the same unit as yours (Eclipse AVN726EA).. mind sharing how did you managed to enter WinCE? I would like to use other navigation software. Thanks. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.