pinktorrent Posted October 6, 2009 Report Share Posted October 6, 2009 here you can find the original: http://hpcmonex.net/roms/winceimg_avics2.zip Quote Link to post Share on other sites
Boullie Posted October 6, 2009 Report Share Posted October 6, 2009 Its not that easy as you think and it also take more time than you think.. I did it as soon as I had some time available. http://rapidshare.com/files/289168613/winceimg4.rar Now, every file/rom I made I checked myself on my AVIC S2 except this one, my AVIC S2 is dead, sent it to repair, so I cant check this rom, and guarantee it works. So if it doesn't please let me know. Of course you can go to ppath.txt and change direction, takes 1 minutes, but after you turn it off you will have to do it again, with the ROM it won't loose those setting. I explained everything in the first page have uploaded the rom to my device works...PERFECT!!!! THANKS! now I just press my "navigate" button, and garmin loads without a problem! hooray! if anyone would like to know how to install garmin mobile XT on the device, let me know 1 minor point: sound of voices is rather quiet, but maybe this can be patched too Quote Link to post Share on other sites
pinktorrent Posted October 6, 2009 Report Share Posted October 6, 2009 My AVIC was also very quiet, but the sound of the voices might be changed in the sys.txt file: add or change the lines in the sys.txt as below [sound] ding=0 suspend_time=5 sound_volume=255 voice_volume=255 sound_muted=0 voice_muted=0 queue_length=200 Quote Link to post Share on other sites
FFFilip Posted November 7, 2009 Report Share Posted November 7, 2009 Enter WinCE interface and open your program using Windows Explorer and check if everything is working.How it to start Windows Explorer help please me. Quote Link to post Share on other sites
chamz Posted November 30, 2009 Report Share Posted November 30, 2009 Hi I tried updating my avic-s2 as most of you have with no success. I am currently trying to get it back to it's original state and seem to be running into a problem. I have done the restore process and after that ,only the audio player and bluetooth icons are highlighted and the navigation isn't. When I pressed map it says "cannot find 'GS2Map' (or one of it's components). Make sure the path and filename are correct and that all the required libraries are available." Is there anyone that can help me. If need I can give some payment if needed. Thanks Quote Link to post Share on other sites
pinktorrent Posted December 1, 2009 Report Share Posted December 1, 2009 You may have to edit sys.txt file in the iGO folder (by using a text editor on your PC). Edit this on your storage card, not on your Navigation device. [device] type="AVICS2" [folders] app="%SDCARD%/iGO8" content="\Storage Card\iGO8\CONTENT" Quote Link to post Share on other sites
saja333 Posted December 6, 2009 Report Share Posted December 6, 2009 ? Quote Link to post Share on other sites
saja333 Posted December 6, 2009 Report Share Posted December 6, 2009 ? Quote Link to post Share on other sites
solventer Posted December 7, 2009 Report Share Posted December 7, 2009 HELP PLEASE I CAN'T SLEEP .I have the avic s1 i can't set it work again by all your posts so this the all image of this prob 1 - i downloaded the 2 files ( winceimg.img and winceimg.bin ) 2 - i unrared the files to the SDCARD not in a folder 3 - i insert the sdcard in my avic-s1 when the devis power off 4 - i turn it on and i see the black screen 5 - i press and hold menu botton and see the blue screen 6 - i chose [ 0=WINCE Upgrade --------> 3=WINCE by SD/MMC(format) ] 7 - finally i see WINCE Upgrade by SD then the device freeeeeeez 8 - i change the step NO [ 6 ] to 2=WINCE by SD/MMC and it freeeeeeez again 9 - then i try the other way to do so i change the step NO [ 6 ] to 3= OtherTools -----> 1=ROM Checksum 10- it desply that info IPL+UBOOT Region Checksum = 0x01e4939d Image Region Checksum = 0x7a83bf29 Any key to continue now anyone can help me for this assue to restore the device and tell me about what is the UBOOT Option ? i get tired and can't sleep because i stay waiting your help thanks for your time and for your help Quote Link to post Share on other sites
pinktorrent Posted December 7, 2009 Report Share Posted December 7, 2009 The storage card needs to be empty, only the two files (winceimg.img and winceimg.bin) may be present, not any other files or folders, i did this too the first time that I upgraded my AVIC device, and my VIC tried to upgrade everything that was present on the storage-card, but this is not needed. So put the only 2 files winceimg.img and winceimg.bin on the storagecard and upgrade again. good luck Quote Link to post Share on other sites
solventer Posted December 9, 2009 Report Share Posted December 9, 2009 thanks for your answer and am sure format the sdcard befor i unzip the two files in the storage card but it didn't work any way else to do this restoration ? you send to me the answer i know it seem to be late but i got it the memory card must be 2G or 1G but i try to with 4G card sorry for my ununderstand Quote Link to post Share on other sites
Raaj1970 Posted January 19, 2010 Report Share Posted January 19, 2010 ALL LINKS ARE BROKEN, NONE OF EM ARE WORKING, I WOULD LIKE TO DOWNLOAD IGO AMIGO FOR MY AVIC-S1, THANKS Quote Link to post Share on other sites
puya Posted January 25, 2010 Report Share Posted January 25, 2010 HELLO EVERYONE I HAVE A BIG HEADACHE BECAUSE MY FATHER BOUGHT ME A PIONEER AVICS2 GPS.EVERYTHING WAS FINE BUT I AM FROM ROMANIA AND I HAVENT THE MAP. SO I HAVE TRIED TO DO SOMETHING BY MY SELF SO I DID.I BROKE THE WINDOWS I THINK BECAUSE IT DOESNT APPEAR ANYMORE THE NAVIGATION BUTTON.I HAVE TRIED TO DO LIKE U GUYS SAY IN HERE BUT ...I DON'T KNOW WHY ITS NOT WORKING.PLEASE SOMEBODY HELP ME CAUSE I DON'T WANNA THROW IT TO RECYCLE BIN.I'M WAITING FOR REPLY PLEASSSEEEEEEEEEEEE!!!! thank YOU VERY MUCH! Quote Link to post Share on other sites
puya Posted January 25, 2010 Report Share Posted January 25, 2010 I HAVE INSTALLED THE ROM WICH IS ON THE SITE HERE, I HAVE PUT THE CD IN THE CD ROM AND THEN I CLICKED UPGRADE/RESTORE APPLICATION.THE PROCESS STARTED AND FINISHED SUCCESUFULY APP.I HAVE ALSO PRESSED UPGRADE/RESTORE MAP AND THE NAVI BUTTON HAD APPEARD BUT WHEN I PRESS IT SAYS HARDWAREIDERROR. AND IN THE RIGHT CORNER WITH SMALL FONT WRITES PHONE END. IF U CAN HELP ME I WOULD BE GREATFULL THANKS Quote Link to post Share on other sites
dron Posted January 26, 2010 Report Share Posted January 26, 2010 See here, but in Russian. http://4pda.ru/forum/index.php?s=&showtopic=46354&view=findpost&p=887967 There is an English-speaking topic, can answer http://4pda.ru/forum/index.php?s=&showtopic=130284&view=findpost&p=3014479 Help me please! I need service manual for AvicS2, tell me where to download? please! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.