Chuck88 Posted April 30, 2010 Report Share Posted April 30, 2010 Some other observations: 1) If I load a saved route, the AVIC ask whether it is OK to start the navigation from the saved GPS position. Without regard to whan I answer (Yes or No), it always starts the route from my current position to the saved destination. 2) If I already have a route plotted, and load a favourite location, instead of showing me the loaded GPS position, it simply shows me the current route (!!!). If I press the ADD DEST, the route is however plotted correctly. My description might not be accurate to 100% but that is what I saw ... Is there anything to do with the previous saved routes or favorites (i.e. not saved by your nav. mod)? Quote Link to post Share on other sites
misterblue Posted April 30, 2010 Author Report Share Posted April 30, 2010 Some other observations:2) If I already have a route plotted, and load a favourite location, instead of showing me the loaded GPS position, it simply shows me the current route (!!!). If I press the ADD DEST, the route is however plotted correctly. For me there is nothing abnormal. Whether or not a route on map, when you select a favorite from the "Cursor Menu", the cursor appears at the location of your favorite, you validate if you want to change the destination point. To your first question I have no answer yet. EDIT : I redid the test this morning. I do not see any problem repeating voices guidance during the calculations of the mode "Multiplan", by cons happened to me (not always) have rehearsals voices guidance during the calculation of mode "Multicalc" . Now I understand why this mode by booting the sounds were cut then reactivated leaving there. I decided that the sounds would not be cut in this mode, which explains the problem you have identified. I'm looking for a solution Quote Link to post Share on other sites
Chuck88 Posted April 30, 2010 Report Share Posted April 30, 2010 EDIT : I redid the test this morning. I do not see any problem repeating voices guidance during the calculations of the mode "Multiplan", by cons happened to me (not always) have rehearsals voices guidance during the calculation of mode "Multicalc" . Now I understand why this mode by booting the sounds were cut then reactivated leaving there. I decided that the sounds would not be cut in this mode, which explains the problem you have identified. I'm looking for a solution Did you see last post on page 2 of this thread? Quote Link to post Share on other sites
Chuck88 Posted April 30, 2010 Report Share Posted April 30, 2010 Some other observations:2) If I already have a route plotted, and load a favourite location, instead of showing me the loaded GPS position, it simply shows me the current route (!!!). If I press the ADD DEST, the route is however plotted correctly. For me there is nothing abnormal. Whether or not a route on map, when you select a favorite from the "Cursor Menu", the cursor appears at the location of your favorite, you validate if you want to change the destination point. Well, not quite that ... AfterI LOADED a saved route, then I select an entry in either FAVORITE or HISTORY, the cursor is not shown in the saved location. The screen only shows the current LOADED route, even if the FAVORITE location is 100 KM out of the current route. The address of the previous SAVED location is however shown. Please note that this problem happens after problem encountered in question #1 of my previous post. Thanks. Quote Link to post Share on other sites
misterblue Posted April 30, 2010 Author Report Share Posted April 30, 2010 @ chuck88, Yes sometimes I have trouble understanding your question because I speak your language poorly. I am trying to make changes based on your comments Quote Link to post Share on other sites
Chuck88 Posted April 30, 2010 Report Share Posted April 30, 2010 @ chuck88, Yes sometimes I have trouble understanding your question because I speak your language poorly.I am trying to make changes based on your comments Hey MisterBlue, if you have question please PM me and I will explain in greater details (français) . Please also see last post on page 2 of this thread? Quote Link to post Share on other sites
Triple F Posted April 30, 2010 Report Share Posted April 30, 2010 Hello, Sorry for my English but i will try to explain what i do not understand to install this mod on my pioneer F500 You write; F500 users must edit the file sys.txt to activate the line "type =" PIONEER749xx "and off the line" type = "PIONEER746xx" This i do not understand, i download your mod and look in the file sys.txt and saw; [device] type="PIONEER746EW" ;F500 user ;type="PIONEER749EW" Must i change it in the following; [device] ;F500 user ;type="PIONEER749EW" Please help me so that i can do this mod. Thanks and best regards, Richard. Quote Link to post Share on other sites
misterblue Posted April 30, 2010 Author Report Share Posted April 30, 2010 deactivation of a line is made with ";" in front activation of a line is done by removing ";" in front [device] type="PIONEER746EW" ;F500 user ;type="PIONEER749EW" parameter for F500 user in sys.txt is : [device] ;type="PIONEER746EW" ;F500 user type="PIONEER749EW" attention, you must use the version of the mod that corresponds to your continent Quote Link to post Share on other sites
Triple F Posted April 30, 2010 Report Share Posted April 30, 2010 Thanks for the quick answer mister blue Now i do understand it, i live in The Netherlands so i can use the UK version and also the French version? Best regards, Richard. Quote Link to post Share on other sites
misterblue Posted April 30, 2010 Author Report Share Posted April 30, 2010 The Euro UK and Euro versions Fr, have a common basis, only some are bitmap map and also voices speedcam km/h units are in French. Quote Link to post Share on other sites
troubadix2004 Posted May 1, 2010 Report Share Posted May 1, 2010 your skin looks nice. is there a german translation available? Quote Link to post Share on other sites
misterblue Posted May 1, 2010 Author Report Share Posted May 1, 2010 @ troubadix2004 Translation for all the mods is really easy to do. I had already created a topic explaining how to: http://avic411.com/forum/viewtopic.php?f=34&t=28387&p=195529&hilit=translate#p195529 Here is a list of all terms of this mod. Replace the words " " from your. Building Distance="Distance des bâtiments" Start Recording="Démarrer Enregistrement" Track Log Options="Options Enregistrement" Load route="Charger Itinéraire" close="Proche" CLOSE="Proche" Custom="Préférences" Custom Settings="Paramètres Préférences" Audible Warning="Alerte Sonore" Visual Warning="Alerte Visuelle" Spoken Warning="Alerte Vocal" Spoken Alert Volume="Volume Alerte Vocal" Warning Beeps="Bips d'Alerte" Beep Distance="Distance Bips" Over Speed Limit="En Survitesse" Over Speed Limit (Direct)="En Survitesse (Direct)" Beep Warning Settings="Réglage Bips Alertes" Navigation Text Color="Couleur Texte Navigation" Main Color="Couleur Princip." Outline Color="Couleur Second." Auto Fading Buttons="Fondu Auto Icônes" Fade Percentage="Extinction Icônes" POI Settings="Paramètres POI" Map Visual Setting="Paramètres Visuels Carte" Custom Camera Alert Settings="Réglages Alertes Radars" Blocked Roads="Routes Bloqués" Road Signs="Indications Routières" Sign Boards="Grands Panneaux Direction" Lane Info="Petites Icônes Direction" Turn Restriction="Priorité de Circulation" Elevation Sign="Afficher Altitude" Speed Limit Sign="Limite de Vitesse" Select Day(s)="Select. Jour(s)" Do you want to reset your current trip?="Remise à zéro des compteurs ?" Full="Complet" CURRENT SPEED="VITESSE" MAX SPEED="VITESSE MAX" AVERAGE SPEED="VITESSE MOY" TOTAL DISTANCE="DIST. TOTALE" DRIVING TIME="TEMPS De ROUTE" TOTAL TIME="TEMPS TOTAL" Arrival Time="Heure d'Arrivée" GPS time="Heure GPS" Speed Limit="Vitesse Limite" Navigation Progress="Progression Navigation" Track logs="Enregistrement" Delete all="Effacer tout" Export All short ver="Exporter Tout" Scenic="Panorama" Scenic/Panoramic_View="Panorama" Fast="Rapide" Short="Court" Easy="Facile" Economical="Economique" Blue="Bleu" Red="Rouge" Grey="Gris" Saffron="Safran" White="Blanc" Black="Noir" Green="Vert" None="Aucune" Please wait ...="Patientez ..." Cruise Dials="Infos Navigation" Around address="Autour Adresse" Traffic Flow="Infos trafic" No Traffic Flow Events="" House Numbers="Numéros de rue" Statistics trip="Statistiques de trajet" Distance AutoZoom Event:="Dist. AutoZoom Evèn. :" Distance View Carpos:="Dist. Position Véhicule :" Tilt Down:="Horizon Mini :" Tilt Up:="Horizon Maxi :" RoundaboutCam="Caméra de Rond-Point" Auto Replan Route="Auto-Replanif. Itinéraire" Calculation Algorithm="Méthode de calcul" Off Route Sensitivity="Tolérance Fin Itinéraire" Recalculation Delay="Delai Recalcul Itinéraire" Guidance Superiority="Priorité Voix Guidage" Spoken Alert="Voix Radars" Guidance Voice="Voix Guidage" Master & Beeps="Principal & Bips" Tolerance:="Tolérance :" Warn Distance="Distance Alerte" Quick Menu Off="Arrêt Menu Rapide" Auto & Manual="Auto & Manuel" Manual="Manuel" Tolerance Type="Tolérance Type" Alert="Alerte" Sound 1="Son 1" Sound 2="Son 2" Sound 3="Son 3" Sound 4="Son 4" Sound 5="Son 5" Sound 6="Son 6" Sound 7="Son 7" Sound 8="Son 8" 1 beep="1 bips" 5 beeps="5 bips" Always="En continu" OverSpeed Limit Settings="Rélages Alertes Survitesse" Restart="Redémarrer" NOTE:\n Program will be restarted, Are you sure ?="\n Le Programme va redémarrer, êtes-vous sur ?" Quote Link to post Share on other sites
Triple F Posted May 1, 2010 Report Share Posted May 1, 2010 Hello Misterblue, I just install your mod and it looks great and i will try it in the coming days. Thanks also for your help with the sys.txt Best regards, Richard. Quote Link to post Share on other sites
Chuck88 Posted May 1, 2010 Report Share Posted May 1, 2010 Little problem: when you hit Nav. Settings from Main Menu, then hit the return key (upper right corner), the screen goes to MAP, instead of the Main Menu. Quote Link to post Share on other sites
misterblue Posted May 1, 2010 Author Report Share Posted May 1, 2010 @ Chuck88, This is not a problem, I wanted it to be like that, this way it is easier for me to test my PC with the emulator and I do not think it's annoying when using "normal " Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.