gabrielgut Posted December 11, 2013 Report Share Posted December 11, 2013 hi, i have the same problem with my avic f700bt can you send me the file please to gabrielgutierrez01@gmail.com thanks Quote Link to post Share on other sites
gabrielgut Posted December 11, 2013 Report Share Posted December 11, 2013 Sounds like you made a mess of your system. From your description, it sounds like it was the semi typical issue with a corrupt GpsParaX.bin (X=0-3) file. The normal solution to that is to delete the 4 GpsParaX.bin files. Where you really blew it was most likely trying to do the 3.1 install. I've noticed that if the version of Windows CE is different between the background windows (done through service menu) and the one on the flash drive you can experience weird issues at times and it will work fine at other times. I have all the files to restore the F700 to version 2.0. I just need an e-mail address to set you up to be able to download it since it is at a commercial online backup site that uses e-mail addresses as a the user ID and sets permissions from there. The files are not something that can be e-mailed as they are about 1.7Gb for the full image. Basically, you need to download the files I can share and the V2.3 test mode files and put them on a SD Card (card needs to be at least 2Gb). 1. Insert SD card into AVIC and turn it on. 2. When the pioneer logo comes up, press and hold the menu, map, eject and the reset buttons at the same time. When your screen goes completely blank, let go of the reset button but continue to hold menu, map, and eject buttons. This will bring you to a blue screen, telling you to reset the unit (ignore this), you will have to enter the service combination. Press the volume knob in this sequence and you will see * signs for each push: Up, Up, Down, Menu, Left, Right. 3. Select Wince Upgrade 4. Select Update SD Format 5. Wait until it says restart in the bottom center. Reset the unit and leave the SD card in. 6. You should be greeted with testmode (It will look very similar to normal windows). Open Explorer and copy the contents of the "F700" Folder from the SD card to the "My Flash Drive" that is located on the unit. Overwrite everything. Except for the test mode files/folder (It will say the copying will take 140min but will only take about 20) please send me to my email gabrielgutierrez01@gmail.com thank you Quote Link to post Share on other sites
aabuelaish Posted December 26, 2013 Report Share Posted December 26, 2013 Sounds like you made a mess of your system. From your description, it sounds like it was the semi typical issue with a corrupt GpsParaX.bin (X=0-3) file. The normal solution to that is to delete the 4 GpsParaX.bin files. Where you really blew it was most likely trying to do the 3.1 install. I've noticed that if the version of Windows CE is different between the background windows (done through service menu) and the one on the flash drive you can experience weird issues at times and it will work fine at other times. I have all the files to restore the F700 to version 2.0. I just need an e-mail address to set you up to be able to download it since it is at a commercial online backup site that uses e-mail addresses as a the user ID and sets permissions from there. The files are not something that can be e-mailed as they are about 1.7Gb for the full image. Basically, you need to download the files I can share and the V2.3 test mode files and put them on a SD Card (card needs to be at least 2Gb). 1. Insert SD card into AVIC and turn it on. 2. When the pioneer logo comes up, press and hold the menu, map, eject and the reset buttons at the same time. When your screen goes completely blank, let go of the reset button but continue to hold menu, map, and eject buttons. This will bring you to a blue screen, telling you to reset the unit (ignore this), you will have to enter the service combination. Press the volume knob in this sequence and you will see * signs for each push: Up, Up, Down, Menu, Left, Right. 3. Select Wince Upgrade 4. Select Update SD Format 5. Wait until it says restart in the bottom center. Reset the unit and leave the SD card in. 6. You should be greeted with testmode (It will look very similar to normal windows). Open Explorer and copy the contents of the "F700" Folder from the SD card to the "My Flash Drive" that is located on the unit. Overwrite everything. Except for the test mode files/folder (It will say the copying will take 140min but will only take about 20) Hello. I've AVIC - F7010BT version 2.0, I've donwloaded V2.8 and after unit reset, system stuck to " system is starting up please wait" and keep rebooting every 5 min. I highly appreciate you to help me my email is aabuelaish@gmail.com Thank you very much. Quote Link to post Share on other sites
djjoep Posted January 10, 2014 Report Share Posted January 10, 2014 If I have a copy of the 3.1 will this work or is it better to update to 2.0 ? If it is better to update to 2.0 My email address is panetta6pack@gmail.com. Thanks again. I bought my truck and this was the installed radio and the version running is a custom version and I just want to have a stock system. I cant use the GPS features I dont know how to work it at all. Quote Link to post Share on other sites
anttid Posted January 11, 2014 Report Share Posted January 11, 2014 Anyone looking for step by step directions and the files on a SD card with the latest maps just message me. Thanks Anthony Quote Link to post Share on other sites
Jusbin Posted January 12, 2014 Report Share Posted January 12, 2014 I need these files as well Jusbin@aol.com Trying to fix the reloading loop error after I got car back from getting the coil packs replaced. I know nothing about this unit nor do I even begin to know the pass key code. Unit was in the limo when I bought it. Thanks Quote Link to post Share on other sites
macmar Posted July 27, 2014 Report Share Posted July 27, 2014 Sounds like you made a mess of your system. From your description, it sounds like it was the semi typical issue with a corrupt GpsParaX.bin (X=0-3) file. The normal solution to that is to delete the 4 GpsParaX.bin files. Where you really blew it was most likely trying to do the 3.1 install. I've noticed that if the version of Windows CE is different between the background windows (done through service menu) and the one on the flash drive you can experience weird issues at times and it will work fine at other times. I have all the files to restore the F700 to version 2.0. I just need an e-mail address to set you up to be able to download it since it is at a commercial online backup site that uses e-mail addresses as a the user ID and sets permissions from there. The files are not something that can be e-mailed as they are about 1.7Gb for the full image. Basically, you need to download the files I can share and the V2.3 test mode files and put them on a SD Card (card needs to be at least 2Gb). 1. Insert SD card into AVIC and turn it on. 2. When the pioneer logo comes up, press and hold the menu, map, eject and the reset buttons at the same time. When your screen goes completely blank, let go of the reset button but continue to hold menu, map, and eject buttons. This will bring you to a blue screen, telling you to reset the unit (ignore this), you will have to enter the service combination. Press the volume knob in this sequence and you will see * signs for each push: Up, Up, Down, Menu, Left, Right. 3. Select Wince Upgrade 4. Select Update SD Format 5. Wait until it says restart in the bottom center. Reset the unit and leave the SD card in. 6. You should be greeted with testmode (It will look very similar to normal windows). Open Explorer and copy the contents of the "F700" Folder from the SD card to the "My Flash Drive" that is located on the unit. Overwrite everything. Except for the test mode files/folder (It will say the copying will take 140min but will only take about 20) Hi, i need all the files to restore the F700 to version 2.0. please my email is dusslorphil@hotmail.com . thanks Quote Link to post Share on other sites
CDD Posted September 8, 2014 Report Share Posted September 8, 2014 Quote Link to post Share on other sites
CDD Posted September 8, 2014 Report Share Posted September 8, 2014 Quote Link to post Share on other sites
jettaflow Posted September 10, 2014 Report Share Posted September 10, 2014 Im having similar issues with my f700bt. Ive had it for maybe 5 years installed by Best Buy. It powers on after about 20 minutes of me driving but will shutdown and power on. It will eventually stay on once my car has been on for awhile. Im not sure if its a power supply problem or if it is the software? Ive read a lot of threads and its kind of hard to do any kind of updating on it since it reboots shuts down and I'm not sure if its updating files that i need to do or if i have to just suck it up and buy another expensive double din? any help or suggestions would be greatly appreciated. Quote Link to post Share on other sites
pintail75 Posted September 15, 2014 Report Share Posted September 15, 2014 Sounds like you made a mess of your system. From your description, it sounds like it was the semi typical issue with a corrupt GpsParaX.bin (X=0-3) file. The normal solution to that is to delete the 4 GpsParaX.bin files. Where you really blew it was most likely trying to do the 3.1 install. I've noticed that if the version of Windows CE is different between the background windows (done through service menu) and the one on the flash drive you can experience weird issues at times and it will work fine at other times. I have all the files to restore the F700 to version 2.0. I just need an e-mail address to set you up to be able to download it since it is at a commercial online backup site that uses e-mail addresses as a the user ID and sets permissions from there. The files are not something that can be e-mailed as they are about 1.7Gb for the full image. Basically, you need to download the files I can share and the V2.3 test mode files and put them on a SD Card (card needs to be at least 2Gb). 1. Insert SD card into AVIC and turn it on. 2. When the pioneer logo comes up, press and hold the menu, map, eject and the reset buttons at the same time. When your screen goes completely blank, let go of the reset button but continue to hold menu, map, and eject buttons. This will bring you to a blue screen, telling you to reset the unit (ignore this), you will have to enter the service combination. Press the volume knob in this sequence and you will see * signs for each push: Up, Up, Down, Menu, Left, Right. 3. Select Wince Upgrade 4. Select Update SD Format 5. Wait until it says restart in the bottom center. Reset the unit and leave the SD card in. 6. You should be greeted with testmode (It will look very similar to normal windows). Open Explorer and copy the contents of the "F700" Folder from the SD card to the "My Flash Drive" that is located on the unit. Overwrite everything. Except for the test mode files/folder (It will say the copying will take 140min but will only take about 20) Can you please send the files to pintail75@hotmail.com Quote Link to post Share on other sites
saber314 Posted September 20, 2014 Report Share Posted September 20, 2014 Can you help me with the files as well relaxer7@gmail.com Quote Link to post Share on other sites
iamnsxtc Posted September 29, 2014 Report Share Posted September 29, 2014 F90bt here. Can you send it to iamnsxtc@ hotmail Quote Link to post Share on other sites
Taisykla Posted October 10, 2014 Report Share Posted October 10, 2014 F900BT, could you send me these too? F-1@super.lt thanx Quote Link to post Share on other sites
Carpo Posted October 12, 2014 Report Share Posted October 12, 2014 Sounds like you made a mess of your system. From your description, it sounds like it was the semi typical issue with a corrupt GpsParaX.bin (X=0-3) file. The normal solution to that is to delete the 4 GpsParaX.bin files. Where you really blew it was most likely trying to do the 3.1 install. I've noticed that if the version of Windows CE is different between the background windows (done through service menu) and the one on the flash drive you can experience weird issues at times and it will work fine at other times. I have all the files to restore the F700 to version 2.0. I just need an e-mail address to set you up to be able to download it since it is at a commercial online backup site that uses e-mail addresses as a the user ID and sets permissions from there. The files are not something that can be e-mailed as they are about 1.7Gb for the full image. Basically, you need to download the files I can share and the V2.3 test mode files and put them on a SD Card (card needs to be at least 2Gb). 1. Insert SD card into AVIC and turn it on. 2. When the pioneer logo comes up, press and hold the menu, map, eject and the reset buttons at the same time. When your screen goes completely blank, let go of the reset button but continue to hold menu, map, and eject buttons. This will bring you to a blue screen, telling you to reset the unit (ignore this), you will have to enter the service combination. Press the volume knob in this sequence and you will see * signs for each push: Up, Up, Down, Menu, Left, Right. 3. Select Wince Upgrade 4. Select Update SD Format 5. Wait until it says restart in the bottom center. Reset the unit and leave the SD card in. 6. You should be greeted with testmode (It will look very similar to normal windows). Open Explorer and copy the contents of the "F700" Folder from the SD card to the "My Flash Drive" that is located on the unit. Overwrite everything. Except for the test mode files/folder (It will say the copying will take 140min but will only take about 20) Can you please email me this ccarpency@yahoo.com Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.