avic_rez Posted November 18, 2010 Report Share Posted November 18, 2010 So I upgrade my z110 to 120 by ordering the SDs and will upgrade with no problem. After that I go the website and I see that there is another important firmware update is available (Firmware Update Version 2.003)so I downloaded to my SD card and install it to the Navi with no problem. Here where it gets tricky. When I go to check the version number instead of 2.003 it still saying 2.00000 ?! and I tried to upgrade again but it wouldn’t do it. Any ideas. Thanx in advance. Quote Link to post Share on other sites
kttii Posted November 18, 2010 Report Share Posted November 18, 2010 Step 5 Once the firmware update is completed, please perform the following steps to confirm that the firmware update was successful: Press the “HOME†key Select the “Settings†tab Select “System Settings†Select “Service Information†Press & hold left upper corner of the “Service Information†screen for a few seconds Confirm that your system correctly displays the below information: PlatformVersion: 2.00000 Application Version: 2.003000 Your navigation system is now ready for use. Quote Link to post Share on other sites
WeatherB Posted November 19, 2010 Report Share Posted November 19, 2010 Step 5 Once the firmware update is completed, please perform the following steps to confirm that the firmware update was successful: Press the “HOME†key Select the “Settings†tab Select “System Settings†Select “Service Information†Press & hold left upper corner of the “Service Information†screen for a few seconds Confirm that your system correctly displays the below information: PlatformVersion: 2.00000 Application Version: 2.003000 Your navigation system is now ready for use. Funny thing is that my 2.003 update went fine (no errors) except that trying to follow the above steps to get the "secret" version screen doesn't work. Quote Link to post Share on other sites
avic_rez Posted November 19, 2010 Author Report Share Posted November 19, 2010 Step 5 Once the firmware update is completed, please perform the following steps to confirm that the firmware update was successful: Press the “HOME†key Select the “Settings†tab Select “System Settings†Select “Service Information†Press & hold left upper corner of the “Service Information†screen for a few seconds Confirm that your system correctly displays the below information: PlatformVersion: 2.00000 Application Version: 2.003000 Your navigation system is now ready for use. I did this and it worked. thank you so much for the help. Quote Link to post Share on other sites
felixgun Posted January 11, 2011 Report Share Posted January 11, 2011 i was wondering the same thing. thanks for the quick tip to view the correct version firmware! Quote Link to post Share on other sites
VBLUE42 Posted January 12, 2011 Report Share Posted January 12, 2011 Funny thing is that my 2.003 update went fine (no errors) except that trying to follow the above steps to get the "secret" version screen doesn't work. Worked for me. Quote Link to post Share on other sites
blazah Posted January 12, 2011 Report Share Posted January 12, 2011 i also upgraded my z110 to the z120. where can i download this update, i cant seem to find it on the site. and what benefits has anyone noticed from it. also is anyone aware if an update to the z130 will be available, especially since the msn direct (z110 & 120)is gonna be conking out on us soon Quote Link to post Share on other sites
zepplinswt Posted March 28, 2011 Report Share Posted March 28, 2011 5.Press & hold left upper corner of the “Service Information†screen for a few seconds. This did not work for me either. Have the AVIC X920BT. Any Ideas. No errors during firmware update. Anything I can check to see if the firware update worked? Quote Link to post Share on other sites
zepplinswt Posted March 28, 2011 Report Share Posted March 28, 2011 nevermind. after i turned off the vehicle and when back after 5 minutes, it worked. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.