micnet Posted March 28, 2012 Report Share Posted March 28, 2012 What is the best way to bypass the parking brake other than connecting the green wire to an on/off switch? Quote Link to post Share on other sites
RiccoFX Posted March 28, 2012 Report Share Posted March 28, 2012 Look up the AVIC-X930BT video bypass procedure, its the same Way Better than the on/off switch, which won't work anyways once you start moving Quote Link to post Share on other sites
laurido92 Posted April 2, 2012 Report Share Posted April 2, 2012 What he said!!! Quote Link to post Share on other sites
richmak Posted July 9, 2012 Report Share Posted July 9, 2012 1. On the RCA connector, move the yellow/black stripe wire (mute wire) up 1 position, so that it is sitting next to the red wire after the move 2. Connect the mute wire (from RCA connector), the light-green parking brake wire (from radio power cord) and the black ground wire (from radio power cord) together 3. Either 1 of the above 3 wires can be tapped to connect to the ground wire of the wiring harness for your car. This link pretty much tells you how to do it. Quote Link to post Share on other sites
Anthony Beko Posted August 10, 2012 Report Share Posted August 10, 2012 what do you do if the person who installed your radio didnt even use that white harness. they only used the black one. please someone help me figure this out. Quote Link to post Share on other sites
VBLUE42 Posted August 11, 2012 Report Share Posted August 11, 2012 Take it back and make them do the install as it should have been done when you paid them to do it right the first time. Quote Link to post Share on other sites
hummer_h3 Posted August 13, 2012 Report Share Posted August 13, 2012 What exactly does the bypass, bypass? I understand it allows for the use of some maping functions while driving, but does it bypass any of the startup screens? Quote Link to post Share on other sites
justin13703 Posted August 22, 2012 Report Share Posted August 22, 2012 what do you do if the person who installed your radio didnt even use that white harness. they only used the black one. please someone help me figure this out. If you dont have that harness, you can connect a very small connector to the corresponding pin on that plug on the back of the radio, and connect it with a short wire to the phillips screw right above the plug. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.