late Posted June 22, 2012 Report Share Posted June 22, 2012 just hooked mine up, put it in mode 17 with a 4 second time and it seems to be working great so far, youtube showed up right away! thank you very much shackrat and others! edit: went for a drive and it didnt work, took it apart then fiddled with it and it appears to be working again. edit: just went and tried again and it isnt working, gonna re-check all my wires again tomorrow maybe something gets caught when i push it behind the cigarette lighter Quote Link to post Share on other sites
rockthebeef Posted June 22, 2012 Report Share Posted June 22, 2012 Thanks for posting this valuable information! 3,5, & 7 seconds has been working perfectly for days now on my Appradio 2. Quote Link to post Share on other sites
nwusr Posted June 23, 2012 Report Share Posted June 23, 2012 Hi all, Im thinking of buying PIONEER-SPH-DA100. To bypass this I thought all i need is a toggle switch ( http://www.maplin.co.uk/dpdt-toggle-switch-2355) Please could someone confirm before i go out and buy the unit? Thanks Quote Link to post Share on other sites
shackrat Posted June 23, 2012 Report Share Posted June 23, 2012 Glad i could help... There seems to be some irregularity in how the trigger is being handled. I've never had it not work after 4 days, but I have seen the action appear to be delayed. I get the first pop up notifying me to apply the brake with the OK button disabled, followedby a second popup with an OK button that I can tap. After that everything works. Sometimes the second popup does not come up until I try to access videos of photos.. Haven't had much time to investigate since it is working. Quote Link to post Share on other sites
late Posted June 23, 2012 Report Share Posted June 23, 2012 After getting upset with mine not working right I decided to look into it and mess around with it. For mode 17 to work with the da01 I would have to start it up then once booted turn the key off and then on again retriggering it (which I believe some people had to do with just using a relay as well) decided to take it apart and wire up the relay with it in mode 12 with the longer times and everything has been working great for a day so far The only thing I changed from the original post is I hooked the green wire to acc instead of remote and the red wire to constant power, at least I think the cig lighter in my ls is a constant power. Quote Link to post Share on other sites
jhanson999 Posted June 28, 2012 Report Share Posted June 28, 2012 Just switched mine for my appradio2 from mode 12 to mode 17 with 3 second timing, changed the wiring to described above, removed the relay and all is working great! Quote Link to post Share on other sites
idobref Posted June 28, 2012 Report Share Posted June 28, 2012 can someone post a sketch/diagram on those different modes thats a bit more easier to understand how to wire? Quote Link to post Share on other sites
late Posted June 28, 2012 Report Share Posted June 28, 2012 can someone post a sketch/diagram on those different modes thats a bit more easier to understand how to wire? the first post says to connect to remote, but i chose not to because on page 2 it was made known that it will only power on when music is playing. this is how i set mine up using acc wire to replace the remote wire part then wiring the power wire to constant power and has been working great to program: pulse 12 times for mode 12. then after it pulses back, to set the features. pulse once to set the first wire to on. wait 3 seconds, then pulse twice to set the second wire to off, then wait 3 seconds, and pulse once to set the 3rd feature to on. then set the times, i used the times mentioned in the first post ( 40 [to set time, it will pulse once do nothing, it will pulse twice then you pulse the wire 4 times, it will pulse 3 times do nothing, it will pulse 4 times to program first time], 45[to set time, it will pulse once do nothing, it will pulse twice then you pulse the wire 4 times, it will pulse 3 times pulse 5 times, it will pulse 4 times to program the second time], 50[to set time, it will pulse once do nothing, it will pulse twice then you pulse the wire 5 times, it will pulse 3 times do nothing, it will pulse 4 times to program the last time]) for my appradio1 due to boot time) then the unit will flash multiple times to let you know programming is complete. turn the switch to off and connect the wires. Quote Link to post Share on other sites
jhanson999 Posted June 28, 2012 Report Share Posted June 28, 2012 How I did mine: Then for programming: 1. Have only the red and black wires of the pac connected. 2. Turn car on or to accessory power. 3. Move the programming switch to ON. 4. Ground the brown wire 17 times. 5. Wait 3 seconds and ensure the light on the pac flashes 17 times. 6. Ground the brown wire 1 time to enter timing mode. 7. Wait 3 seconds for minutes timeout, light will flash. 8. Wait 3 seconds for tens place timeout, light will flash. 9. Ground the brown wire 3 times. 10. Wait 3 seconds and ensure pac flashes 3 times, then goes to fast flash. 11. Move programming switch to OFF. 12. Turn vehicle off. 13. Reconnect/connect the blue wire from TR7 to parking brake wire, green wire from TR7 to accessory power. 14. Profit! Quote Link to post Share on other sites
idobref Posted June 28, 2012 Report Share Posted June 28, 2012 sweet, i just ordered the relay.. will try it asap! thanks! Quote Link to post Share on other sites
Lusi69 Posted June 29, 2012 Report Share Posted June 29, 2012 Mon anglais est très moyen. On parle de quoi exactement svp? Quote Link to post Share on other sites
jhanson999 Posted June 29, 2012 Report Share Posted June 29, 2012 Mon anglais est très moyen. On parle de quoi exactement svp? Je ne connais pas le français, mais je sais que certains sites de traduction, alors j'espère que vous comprenez cela. Nous parlons en contournant l'exigence du frein de stationnement pour l'utilisation du appradio. La TR7 CCP semblant de l'application du frein de stationnement pour vous quand il est configuré et correctement câblé. Quote Link to post Share on other sites
VBLUE42 Posted June 29, 2012 Author Report Share Posted June 29, 2012 Guys start another thread in your native language please. Quote Link to post Share on other sites
late Posted June 29, 2012 Report Share Posted June 29, 2012 Guys start another thread in your native language please. he actually doesnt speak french and used google to translate it, he even says so lol Quote Link to post Share on other sites
Lusi69 Posted June 29, 2012 Report Share Posted June 29, 2012 Je ne connais pas le français, mais je sais que certains sites de traduction, alors j'espère que vous comprenez cela. Nous parlons en contournant l'exigence du frein de stationnement pour l'utilisation du appradio. La TR7 CCP semblant de l'application du frein de stationnement pour vous quand il est configuré et correctement câblé. Ok Thank you. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.