Jump to content


Photo

Radio stations don't get remembered


  • Please log in to reply
3 replies to this topic

#1 JackTheRipper

JackTheRipper
  • Members
  • 8 posts

Posted 01 July 2012 - 10:52 AM

I got used f310, updated to 320bt (by soft), every time I find a radio station and I make it remember (by holding station no on display) then I detach the panel or simply leave the car (with panel attached) start again and the stations are missing. I have to find them again etc. Before updating there was the same situation so I thought the update will solve it.

#2 NorthTron

NorthTron

    Member

  • Members
  • 49 posts

Posted 01 July 2012 - 02:16 PM

Do any of your settings save? Or only radio presets

Sounds like the CMOS battery is defective or your EEProm the settings are stored in is malfunctioning.

#3 JackTheRipper

JackTheRipper
  • Members
  • 8 posts

Posted 01 July 2012 - 06:29 PM

All the setting seems fine. When I do the pull up for a short time it's ok, when for longer ~hour time it's gone. The battery from the front panel is ok (at least when I check it's full or almost full, the panel is set to 'off' position). Or maybe it's not the front panel case or just a time of leaving the radio turned off (without ignition), how to check CMOS battery or second thing?

#4 JackTheRipper

JackTheRipper
  • Members
  • 8 posts

Posted 02 July 2012 - 04:30 PM

OK, solved. As I have VW I had to swap red and yellow cables between ISO and Avic.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users