Rich2putt Posted October 26, 2013 Report Share Posted October 26, 2013 Greetings, This is my first post & this Wednesday I'm having the Z150BH installed by a local installer. After reading the installation manual on (p#8 & #9) has the instructions on the iPhone & Android. In order for the iPhone5 to work properly for my Apps, I will need to purchase an accessory cable for $50. I would like your thoughts if this will work rather then purchasing the Pioneers cable. 1) Use this Apple cable http://store.apple.com/us/product/MD818ZM/A/lightning-to-usb-cable?fnode=3a (connect the USB end to the rear of the unit & the other end to this Apple AV Adapter http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=3a 2) Next connect one end of a HDMI cable to the rear of the unit & the other end to the Apple AV Adapter. I believe this will work? yes/no? Thanks, Rich BTW......great info on this forum Quote Link to post Share on other sites
bcsomos Posted November 5, 2013 Report Share Posted November 5, 2013 You do not need to buy the pioneer kit. All you need is the Apple Lightning Digital AV adapter (about $50) and the Apple USB to Lighning cord (about $20) and a highspeed HDMI cable (as little as $10). The USB port in the back of the radio will charge your phone, and the HDMI port is used for the AppRadio interface. I have this setup but I also use an intermediate USB cord (male to female panel mount that also included the mini jack) that I plug the lighting to USB cord into. This saves me from burying the iphone cable behind my dash and made for a cleaner install. Quote Link to post Share on other sites
hitman80 Posted November 5, 2013 Report Share Posted November 5, 2013 bcsomos, could you post a picture of your USB/mini jack mount? I'm thinking of doing the same but just haven't found a good looking setup. Quote Link to post Share on other sites
miike Posted November 11, 2013 Report Share Posted November 11, 2013 I have an IH-202 in mine and it works finally. Hard to get this sucker set up right. iphone 5 and z150 Quote Link to post Share on other sites
VBLUE42 Posted November 11, 2013 Report Share Posted November 11, 2013 Greetings, This is my first post & this Wednesday I'm having the Z150BH installed by a local installer. After reading the installation manual on (p#8 & #9) has the instructions on the iPhone & Android. In order for the iPhone5 to work properly for my Apps, I will need to purchase an accessory cable for $50. I would like your thoughts if this will work rather then purchasing the Pioneers cable. 1) Use this Apple cable http://store.apple.com/us/product/MD818ZM/A/lightning-to-usb-cable?fnode=3a (connect the USB end to the rear of the unit & the other end to this Apple AV Adapter http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=3a 2) Next connect one end of a HDMI cable to the rear of the unit & the other end to the Apple AV Adapter. I believe this will work? yes/no? Thanks, Rich BTW......great info on this forum Simple answer is yes. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.