Sabre3487 Posted March 8, 2007 Report Share Posted March 8, 2007 I have 06 Zephyr, I have noticed some static every so often on some channels. I forgot what your supposed to do, to "boost" your signal? Hook up the power antenna line? Anyone have wiring pinout of Ford 06 24 pin? Thanks, Burn Quote Link to post Share on other sites
PDSchweitzer Posted March 8, 2007 Report Share Posted March 8, 2007 See attached. Pin 5 is the power attena[/img] Quote Link to post Share on other sites
Sabre3487 Posted March 8, 2007 Author Report Share Posted March 8, 2007 THanks, you don't happen to have all the pin - color codes? Quote Link to post Share on other sites
PDSchweitzer Posted March 8, 2007 Report Share Posted March 8, 2007 THanks, you don't happen to have all the pin - color codes? From my 2006 Ford Freestar Electrical Shop Manual: 1 = Voltage supplied at all times 2 = Switched power 3 = Illumination 4 = Ground 5 = Power antenna 6 = Not used 7 = Not used 8 = Spk LF+ 9 = Spk LR+ 10 = Spk RR+ 11 = Spk RF+ 12 = Spk RF- 13 = Ground 14 = Vehical Speed Signal 15 = Voltage Supplied at Start 16 = Not used 17 = Not used 18 = Steering Wheel Contols 19 = Not used 20 = Not used 21 = Spk LF- 22 = Spk LR- 23 = Spk RR- 24 = Not used *Note: Pin 18 is which you connect the PAC-Audio Unit SWI-PS http://pac-audio.com/products/productsC ... 0Interface Quote Link to post Share on other sites
Sabre3487 Posted March 10, 2007 Author Report Share Posted March 10, 2007 How do I know if the wire in slot 5 is the power Antenna wire? What should the voltage read with a meter? Reason is the pin locations you gave, I don't have any wires in 3&4, I do have a wire in 5 though. So If put a meter on it what should it read +12v or ?? Thanks, Burn Quote Link to post Share on other sites
PDSchweitzer Posted March 10, 2007 Report Share Posted March 10, 2007 How do I know if the wire in slot 5 is the power Antenna wire? What should the voltage read with a meter? Reason is the pin locations you gave, I don't have any wires in 3&4, I do have a wire in 5 though. So If put a meter on it what should it read +12v or ?? Thanks, Burn If you are using a Ford brand 2004 or newer car/truck/van/SUV then pin 5 should be around 12V when the radio is ON. The RADIO is feeding pin 5 the 12V Quote Link to post Share on other sites
kenchar Posted March 14, 2007 Report Share Posted March 14, 2007 Here is the pin assignents for the 06 Zephyr. 1 (BU-RD) 16 Voltage supplied at all times (overload protected) 2 (GN) 20 Accessory delay relay switched output 3 * * not used 4 * * not used 5 (VT-BK) 18 Antenna power 6 not used 7 not used 8 (WH) 20 Left front speaker + 9 (BN-GN) 20 Left rear speaker + 10 (BN-WH) 20 Right rear speaker + 11 (WH-VT) 20 Right front speaker + 12 WH-OG) 20 Right front speaker - 13 (BK-BU) 14 Ground 14 * * not used 15 (GY-BN) 20 Voltage supplied in Start (overload protected) 16 * * not used 17 * * not used 18 (GY-YE) 22 Audio steering wheel switch signal 19 (BU-WH) 22 Audio steering wheel switch return 20 * * not used 21 (WH-BN) 20 Left front speaker - 22 (BN-YE) 20 Left rear speaker - 23 (BN-BU) 20 Right rear speaker - 24 * * not used In case you still need it. Ken. Quote Link to post Share on other sites
MisFit Posted March 15, 2007 Report Share Posted March 15, 2007 its a purple black wire Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.