jam996 Posted June 8, 2007 Report Share Posted June 8, 2007 Hi, I was trying to install my backup camera and while I was splice'n the power wires it short circuit'd, the nav wont turn on, I tried resetting it but no luck. Any thoughts on what might have happend. thanks Quote Link to post Share on other sites
bobmun Posted June 8, 2007 Report Share Posted June 8, 2007 have you checked all the fuses? Quote Link to post Share on other sites
MPS Posted June 8, 2007 Report Share Posted June 8, 2007 check fuse bax Quote Link to post Share on other sites
nismoRoadster Posted June 8, 2007 Report Share Posted June 8, 2007 Did you check the power wire with a volt meter? I accidently shorted mine to ground and i checked all the fuses. but it took me over an hour to find out my car had a third fuse for the radio hidden underneath the wiper crawl area for an anti-battey drain protection. Quote Link to post Share on other sites
djmixmac Posted June 8, 2007 Report Share Posted June 8, 2007 Yeah, I would check your fuses. Quote Link to post Share on other sites
BigFloppy Posted June 8, 2007 Report Share Posted June 8, 2007 I will give you $50 for a dead Z2 (that way at least, I'll get an image of the drive to put on my FTP) Quote Link to post Share on other sites
jam996 Posted June 9, 2007 Author Report Share Posted June 9, 2007 yeah, I just checked all the fuses and they all work, what else could it possibly be? Quote Link to post Share on other sites
jam996 Posted June 9, 2007 Author Report Share Posted June 9, 2007 I removed the Z2 and unplugged everything, including battery. I let it be for about 20 min. and when I put everything back, It works!! I guess It needed some kind of hard reset. thanks anyways Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.