vjaneczko Posted January 27, 2016 Report Share Posted January 27, 2016 Just installed my camera and running into a problem. When the car is off (but the key is in position 2) or if the car is running and my Note 3 is not connected, the camera works as expected, i.e. when in reverse or when I tap the button on the main screen. When the phone is connected the to radio, the camera will display a distorted, completely unusable image. So it seems there's a problem with the phone working while the camera is on. I would have thought it might be a grounding issue but the problem happens when the phone is connected via Bluetooth, as opposed to the HDMI connection. Has anyone run into this situation? Quote Link to post Share on other sites
vjaneczko Posted January 27, 2016 Author Report Share Posted January 27, 2016 Correction; the screen problem occurs when the engine is running. Quote Link to post Share on other sites
400ixl Posted January 28, 2016 Report Share Posted January 28, 2016 What version of firmware are you running? There was a patch for issues where a reversing camera was plugged in. Quote Link to post Share on other sites
vjaneczko Posted January 29, 2016 Author Report Share Posted January 29, 2016 Pretty sure that's been around for a while but I'd have to check. It's been a long time since I patched it so that may do the trick. Keep you posted. Quote Link to post Share on other sites
vjaneczko Posted January 29, 2016 Author Report Share Posted January 29, 2016 The Pioneer website mentions two patches; 8.17 and 8.30. The first one is for the camera (which I already have installed) and the second one is only for iPhone 5 compatibility. Looks like that's not the solution. Thanks for the post though! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.