3sixty

wow!!! i had a pretty sweet mod prior to this, but 3.0 is dope! i have had the worst luck with my ipod connection not working all the time. and with 3.0 it works every time i connect it!! that alone is the biggest plus. the response is much improved. i'm gonna cancel my order of the official sd cards.

so i just ordered the official 3.0 sd cards from pioneer because i thought i may have bricked my unit. did the first step to update the OS but couldn't get it to get pass the bootup screen because of the extra folders other than testmode and data that were on the card. i've got about 10 min before copying all the files over. does this mod/hack make ordering the sd card from pioneer useless? if so i'll try to cancel my order.

does this knob interfere with functionality? can I still move the knob in all directions for stuff like track skipping?

i would get a remote for the avic, but the avic has no infrared built in. so it's physically not possible. but i wish pioneer gave the option. it would make it way easier for for passenger deejays aka technically challenged hot chicks to control the stereo.

Yeah I was having the same issues. I posted them on the first page about the 5th post down. I haven't found any time to delete the files yet. I'll try sometime this week.

AZFlyingDiver, I will try deleting the key beep files to see if i get can the same results, since i have the same avic installed in the same car as you.

i've only put an SD card in a few times. So it has not been in when the iPOD/AVIC is being moody.

i'm really glad someone else has issues with the PAC. I thought I might have been the only one since i didn't see any threads on it. And I'm really glad the manufacturer stepped up to the plate. Good stuff. I have 2 issues: 1.) as mentioned above, I have lag when pressing the button and the command being executed. sometimes the lag isn't that bad. other times it can take a few seconds. 2.) in addition to the lag, when the command is finally executed, the AVIC responds like i pressed the button a bunch of times when I've only pressed it maybe a couple times. I think this coul

I'm up in the air as far as what theme i want to install. vista vs iPhone. but i was just curious if the usb pic for the iPhone theme gets replaced when the iPod is connected.

i've got the same issue. worked fine for like the first week of getting AVIC installled. but pre 2.0 patch and post 2.0 patch, the thing is so flaky with the iPod. there'll be times when i have to connect and disconnect over 10 times and still sometimes won't work at all. very irritating when playing music from the iPod is the most important thing for me. (13,000 songs). good thing i bought the xm module. i took all my cd's out of the car. no having to lug those around was another reason for buying the Ipod & avic. anyways, i really hope pioneer recognizes this as huge bug they need t

i finally got sick of outlook on my phone transferring contacts to the avic last name first, even though i have them sorted by first last. so i put the first and last name in the first name slot. well they are sorted now by first name now on the avic. keep in mind i haven't been able to get contacts voice recognition since transferring after the 2.0 update. so i tried removing the outlook formatting (xxx) xxx-xxxx. that didn't work. if the number was 10 digits, it automatically puts the formatting back in. so i put a 1 in front of each number and that won't put formatting back

http://avic411.com/forum/viewtopic.php?t=18248

i failed to mention that i had a custom DCD rom from xda developers. I updated my rom last night. sync'd with the avic perfectly and was able to transfer contacts on the first try. i'm guessing the somehow the phone was in a bad state? maybe even just a hard reset on the phone would have done the trick. by the way i didn't update my radio, which means the bluetooth version on my phone was is the same as when i was having problems transferring contacts to the avic. so again i think a hard reset to the phone might be the solution.

i sync with outlook. no sim card for verizon. i tried with and without enabling the serial port. and with the serial port enabled, tried secure and unsecure connection. no luck. did you have to create an outgoing port? i've tried with and without an outgoing port as well. still no luck.

i've got the same issue with a verizon 6800 pda. before 2.0 update, it didn't transfer at first, but did on the 2nd attempt. i haven't had any luck at all after the 2.0 update. just getting that "no number found"....WTF