Z06PSI

Thanks for the tip. Now that I have had some time with this all I am going to say is WOW!. Everything works as it should have with the 3.0 update (sarcasm on: Thanks Pioneer). I had a very buggy system before and now it all works. Retell you need some compensation for your time and saving me some frustration.

Just an update. Installed Retell's files and all went well until the it rebooted for the last time. I got the dreaded "Caution: Image screen may appear reversed". Well the screen could still be touched with a audible response and I just started touching random places. Well it ended up doing a language quick boot into Spanish but at least I got the damn screen to show. Changed the language back to English and all is well. I have not tested it completely out but the phone at least syncs. Report back after a couple of days of use.

I see that nobody answered dvine1. Can someone take a stab at it? The reason I ask is my F-90BT stopped working out of nowhere with the Pioneer 3.0 installed and after trying to reinstall the Pioneer 3.0 software again I am getting this exact problem. I am going to try the 3.1 but my question is will it solve this? Thanks in advance for some to help out on this.

Yes I am having the same issue.... can anyone help and provide us with the X90BT Firmware 3.0101 download. :G Thanks, Me as well. WTF?

Update - Well I was driving home from work today and was thinking how much time I was going to spend fixing Pioneer's problems and I hit the map button and out of nowhere it started working. I quickly went in a turned off the camera and have not had a problem since.

O.k. apparently I have to reinstall the software to correct but have to hack it to do it. Pioneer you suck when it comes to customer service and should have done a lot more testing before you put 3.0 out.

O.k. I was previously on the 2.0 furnished by Pioneer when I bought the unit. I had zero issues with it other than being slow and applied no hacks to it. I bought the 3.0 upgrade from 6th avenue and all was well. Just got around to doing the upgrade and it actually had zero issues. Booted up fine and everything looked great. Shut the vehicle off while I attended an event and after start up I have no screen except for it says "image maybe reversed" like the camera is in operation but it isn't. Plays the music from the SD card fine but there is no splash screen or anything. Just the message

Picked mine up for 465.00 new un-refurbished. They are out there.

That is what I thought. Thanks!

[quote name="TheFarq"]Update on an 06 Expedition Reverse Wire - Black / Violet Wire, not Black/Pink. (Trial and Error) VSS - Not really sure how to test this well, but there was a Grey/Black wire going to the wiper motor so I tapped that. [/quote] The Reverse wire. Where is it at physically?

I would like to just hook the reverse wire up to a switched +12VDC and have the rear view camera available all the time because I tow with my Navigator and would like to be able to check on the load from time to time going down the road. Is the reverse wire able to accept a a straight switched +12VDC all the time?

Do you know if that wire is the same as on the gear selector?

Got the knob and the wife loves the feel of my knob now. Thanks!

I put a 1.5K ohm 1/2 watt resistor in and the pop is significantly less but it is still there.

I don't have any issue with my F-90BT and my Blackberry 8830WE