Jump to content


Corvus

Member Since 10 Mar 2013
Offline Last Active Yesterday, 11:42 PM
-----

Posts I've Made

In Topic: F930 restarts sometimes during use

13 September 2017 - 02:39 PM

I think it's the grounding around the frame. Rememer reading about it in an other forum.

 

Take out your unit.

Check the frame.

Maby you have to redo the fram, bend it out to get a tigther fit


In Topic: New Release F20BT F30BT F40Bt F920BT F930BT F840BT Etc 2017 Release

31 August 2017 - 03:12 PM

Corvus, please instructions ? 

Updated my previous post...


In Topic: New Release F20BT F30BT F40Bt F920BT F930BT F840BT Etc 2017 Release

30 August 2017 - 06:16 PM

Did you put the patched one back in PRG1?

Yes, so in reality I only patched the one in prg1. The one in pgr0 is the original file (as mention already "new" offsett)


In Topic: New Release F20BT F30BT F40Bt F920BT F930BT F840BT Etc 2017 Release

30 August 2017 - 05:42 PM

Nag screen removed, patched navi.exe v7.0 @ offset BEC18 0500000A -> 0000A0E1, replace in pgr0

(just found the rigth offset then I already saw RonS found it in Z forum so I can confirm its the same offset)

I attach the patched navi.exe v7.0 taken from the 2017 release file.

 

Nag screen removal Instructions:

Only aply after you have updated the maps!!!!!!!!!!!

 

1. Copy the pached navi.exe and tesmode.key on a SD (or use Hxd and patch your own navi.exe. (BEC18 0500000A -> 0000A0E1)

2. Fire the unit, testmode will start.

 

If USER\PRG.FLG file exists you have to swop USER\PRG1\APL\Navi.exe or else you have to swop USER\PRG0\APL\Navi.exe
Remember to delete the navi.exe on device before you start copy it from SD because testmode.key dossent suport overwrite.
 

3. Then you copy navi.exe from sd to device.

No more nag, and you the latest ver off navi.exe!

 

 

RonS

Yesterday I copied from the unit renewallFlib.dll in prg0. Started HxD and found out it had the "new" offset.

Then I tried to update the unit, but it diddent accept the password. Tried to delete renewallFlib.dll in prg0 and copied back the one I had opened in HxD.

It failed. Then I was gonna look into prg1, but I had to go to bed. Today I copied the one from pgr1, it was not patched. Did that, and now everything works!


In Topic: New Release F20BT F30BT F40Bt F920BT F930BT F840BT Etc 2017 Release

30 August 2017 - 04:33 PM

Suksess!!!!!!!!!!

Update complet on f-930bt Had to goto prg1  and change offset. Did try prg0 first, but it had allready been pached? Yes RonS, the file I copied from unit prg0 and zipped down.

 

Thank you godzilla and RonS