Jump to content
AVIC411.com

zzricezz

Members
  • Content Count

    18
  • Joined

  • Last visited

About zzricezz

  • Rank

  1. Hmm, I installed TVOut2 but my screen is still blank out. Do you have step by step instructions how to set this up? I'm assuming we suppose to use the iPod cable?
  2. I'm getting mix results. In order to have the iphone 3g charge, it gotta be connected after the d3 is power on. I tried having the iphone 3g connected before starting my car and the d3 will detect it and stuff but it wouldnt' charge. Both scenario, the iphone 3g would pop up with an error message stating that I connected it with an incompatible adapter. I just let the error message disappear on it own and I can see the charging battery icon. I was able to get Flycast working with the d3, it like having free satellite radio in the car now ..
  3. I got this from the Toronto Prelude Club when i was looking for the VSS wire. The VSS wire on 5th gens is also located right behind the deck. Theres a harness attached to a metal bar behind your deck, if I remember correctly its the far left harness and its a blue/white wire. Same wire goes to the ECU, which is under the pass side carpet.
  4. The audio control is still done on the iphone after syncing with BT? Or I can use the D3 to change songs?
  5. It is a switch board, sometime I get an operator and sometime I have to dial the extention. It will soon be illegal to be holding a cellphone while driving in my city and it suck that the D3 can't do something this basic.
  6. dam. seems like an expensive device like this can't even do some of the basic stuff someone would expect it should do.
  7. Is it possible to bring back the keypad during a call? I need to enter an extention and I can't do it.
  8. Is there anyway to disable the Bluethooth Audio screen? Since I don't use it I rather not have it on the list of input to cycle.
  9. you need to be in the map screen then click on menu and it is in one of those setting under guide mode or something like that.
  10. Is it possible to bring up the keypad once I make a call using the D3? When I call a place that need me to enter an extension I can't do it with-in the D3 system.
  11. hey brunp, I connect it to the Illumination wire instead of the dimmer wire and it is now working. My mistake was matching the color of the wire to the wiring harness. orange/white is the dimmer wire for my car.
  12. Ok, after more reading, there are 2 different wire in my car. Dimmer and Illumination. The illumination wire has like an on and off signal while the dimmer has a variable voltage depending on your dimmer setting. So it is not the same. I will try to re-wire it tonight and see if it works or not.
  13. Interesting, I'm having the same problem. All Canadian cars has DRL and I tap the illumination wire to the dimmer wire but nothing happens. When I checked for the illumination status under hardware info, it has "OFF" as status. Not really sure what that means. I really hope the unit isn't defective or anything.
  14. Thanks to the uploader. It worked perfectly and all the functions still worked with the d3.
  15. are you able to transfer phonebook from iphone 3g to the f90bt?
×
×
  • Create New...