dtomcat

I believe that the HD3 is a european unit... so the maps listed here will not help you. You would need to get the european maps. I'm not sure you can put US maps on it from a Z3 image. As for bluetooth... I would think you could buy the bluetooth unit (the Z's do not have it built in)... I think the difference is in how the tuners are... different frequencies for different countries... all of this is a guess as i'm only familiar with the Z's.... that is probably why no one is responding! we are all used to Z1-Z3's Please take all this with a grain of salt as again.. i'm only guessing .

Sorry.. can't be done to my knowledge. It is a proprietary format. no solution has been found.

I have not tried on GTO... but I did try it on a Toyota Tundra... it's very nice... I did not even have to program it... the module detects which car it is and which radio it is talking to... and programs itself (again in the US... not sure about UK ... though wouldn't see why not)... I think the only bad thing is that with the ZX (z1,z2,z3) ... (again not sure about UK models)... but you can't program the voice recognition function from Steering Wheel via ASWC. Let us know how you go... and how it works!

I don't know about UK... but the ASWC is awesome here in the states! maybe look into that... just google "ASWC"

Work out for you?

Early in the forum is a post about Newsgroup/usegroup... if you have access this is the way to go! it's server based and is a LOT faster than torrent (when not seeded very well).

the Z1-Z3 require a seperate module for XM... so if there is an antenna problem, the antenna feeds into the xm module and not the head unit. my guess since you mention traffic is you would have/need GEX-P10XMT. Hope that helps!

Spliced in the Attenuator cable... and it worked flawlessly! Sounds better than the mic that came with the Z1! Everything looks clean and factory!... hope this helps others!

The Jar from the crash could have knock the connection in the back out (if it wasn't locked in .. or not inserted fully?)... if the Fuse thing doesn't work out... try that!... if all connections are fully inserted.. then it might be bad news!

The line showing your straight line to destination is something that has always been on my Z1... and i've upgraded every update... z1 to z2 to z3 2010 to z3 2012... every version on mine had that line. not sure if you just never noticed it or if mine was just different. Hope that helps!

Thanks!... that's what I figured, but wasn't sure.

Make sure your using arconis 10... I tried using arconis 2012 and I got a corrupted error as well... once I used Arconis 10... all worked! hope that helps!

Just info for anyone wanting to do the same. I created a circuit (with overheat protection as well as fused) that allows me to power the factory microphone inside my toyota tundra. basically have 4 wires for the car side... (+5v, GND, Mic+, Mic-) and on other side (Acc+, GND, Avic Mic cable) (for Mic cable just took apart my Mic and took the element off of it give me a 2.5mm cable).... so hook everything up and it works!!! well kinda... Avic is used to unpowered mic... so with this setup...a whisper is almost too loud... and when driving, the background noise is amplified so much that i

with the RAR files... you need all of them... I don't remember how many... the two parts mentioned above were corrupted when uploaded and someone (using the PAR2 files included in upload) repaired them and posted them so no one would have to repair them themselves.

SO far no problems... but can anyone confirm?

Hello, Quick question for anyone who knows.... Install my Z1 in my new Tundra (not something I will EVER do again! I noticed after routing everything that I had the black end of the IP-BUS cable at the Z1 side... so the blue must be at the P10XMT side.... everything works fine! is this a problem?... I really do NOT want to re-route the wire and take everthing apart. TIA! -Rob

You only downloaded two of the files you need... it's like 6.8GB total... if you have a newsgroup server you connect to. you can get the other files need FAST if not you'll need the torrent

Yeah... when uploading I had an error... and then it said it already existed so I couldn't reupload.... but the PAR files should repair it, so i didn't think it was a big deal... Thanks Mickey!

This is just for "avic411.com" members only http://bit.ly/PrCO9r _______________^^^^ Important!

I have an NZB file ... where can I post it?

I can confirm: Version: 06.0000 CDDB Version: 12-01-0010 Platform: 3.000200 GPS Version: 1.200000 HDD App Version: 6.000000 No updating required after restoring image to your drive!

I forget how to get all the information... All i see is Version, CDDB Version, and something else.. only 3 items show... but it's 6.0000 And a heads up ... Since the last map update, i'm sure many have upgraded to Win 7... well Arconis 10 does not work with windows 7 (Windows says something about compatability and will not let it run, tried changing compatability mode, etc... does not work).... Current version of Arconis ... Does not work with this backup. Map partition shows as 15gb vice 17gb... and it errors out. SO you will need windows XP for this backup to work (in my exper

Can anyone confirm that the software is 6.000 I put the update on my drive... but it just booted right up without updating anything... the last two updates... it said it had to update stuff (black screen if i remember right)... but this time.. it just booted up? only thing I can think of, was Z1 update changed it to Z2... and Z2 update changed it to Z3... this update didn't update that "deep" .... so maybe no "updating" internally after the update? Thanks! My first day off is Wednesday... I have 3 Doctor's appointments, but after, I'm going to try to get it up on a newsgroup.... (n

Hoping this is available somewhere.... I am wanting to buy a new mic clip... only need the part that actually holds the mic, but will buy the entire clip if necessary... but I do not want to buy a new mic.... does anyone know where I can buy these? mine got bumped by someone washing the car and broke the "C" part... Thanks! (all i could find was the whole clip with mic)

My moves to home position when calling home... but that's it