enkrypt3d

it looks like all file attachments in the forum are gone... (pictures, pdf's etc) was this due to the upgrade / fix?

Downside about this is that you won't have audio while looking at this, correct? Can you jsut switch over the video portion and keep the radio playing? I'm thinking no? The other option is to try to see if you can use the backup video feed, but think this could cause complications also... yea thats why it might work better with a 2nd LCD screen which isn't always an option for most cars... my NSX can have 2 LCD screens in the console tho so thats a plus

no need to reinvent the wheel here guys: http://scienceofspeed.com/products/engi ... HKS_CAMP2/ This works with any OBDII car... you would just use the A/V Input for the HKS CAMP2 as a source and switch over to it as needed... it has a remote control so I guess you could write a small app to control it? Or set it up on a 2nd LCD screen.....

nah i dont think u need it.

Well I waited for about 30 min and nothing changed, so I rebooted it and it's still working at 2.0. Can anyone help me understand why it didn't work? I followed the guide perfectly:Here's what I did: Wiped my SD card and made sure it is FAT32. Put 2 files on it, WINCEIMG.BIN and WINCEIMG.CKS. Followed the directions to step 6, and it just hung indefinitely. Tried a 2nd time and got the EXACT same result. PLEASE someone HELP! GUYS for the last time use this improved guide! viewtopic.php?f=34&t=25817 how many times do we have to say it? Once you use this better guide, i

What does the data.zip file do? And is there a way to use the iGo version from the X-Series? The map interface looks so much better and clearer... or is that part not something that we can use on the F series?

ah yes you're right... i had the terminology backwards thx

no make sure u are holding the buttons correctly to get it into test mode and then putting in the correct combination to get into the menu inside testmode. it took me a few tries... be sure u are waiting for the "please push reset button again" to release the menu and maps button... again for those having trouble look at the better guide! All these reboot problems are attributed to people not doing something right... be sure u hold the right buttons for the right amount of time. Step 4.0: Turn unit on with the SD card in. When the pioneer logo comes up, Step 4.1: press and hold the m

yea i use polarized sunglasses too... i wont wear anything else i really wish pioneer would wake up in that these LCD screens perform poorly w/ direct sunlight... there are certain LCD's that are designed for outdoor use... in which the LCD screen is bright and very clear even in direct sunlight... i'm surprised that pioneer hasn't caught on to this.

I have my F90BT installed and cant stand it when the sun is hitting it directly... I can't see anything! Does the screen on the X910BT work better with direct sunlight hitting it? If so I might end up selling my F90BT.... thx

I'm sure you'll get banned for that... There's really no reason to say that when all he was trying to do was help. viewtopic.php?f=34&t=25817 try this guide (its not mine) good luck

If you have a 500 make sure pedestrian mode is not on. no i have a F90BT... wha is pedestrian mode for anyways?

Well its not scrolling thru them by itself... I'm doing that to see if I can get 3D mode back I park under a parking garage pretty much everywhere I go.. I'll see if it makes a difference next time I park on the street...

I just updated to 3.01 so its acting a bit better.... but it still takes about 30 seconds for the nav to respond once I pull out of the parking garage.. I guess thats normal? And its weird that that I have to select a 2nd way point, then click map again, then scroll thru 2D, 3D and N^ to get it to go into 3D mode again... very strange.. but all in all the system is working pretty well.

yes but you have to follow a few different steps if its all on one card.... as in be sure u are copying the correct files etc

I think you better do a little more reading before you really hose your unit. The instructions are very simple. There are too many posts about on how to do this. I know it can be frustrating, but follow the instructions carefully and you will be fine...print them out.. Here is a good guide viewtopic.php?f=34&t=25817&start=0 +1... or buy the official one...

Did u unzip it???

I'm not trying to be rude here, but what you're asking has already been answered. The instructions are AT the link for the 3.01 update. As I said earlier: "That's the 3.01 update. Read the instructions from page one for the 3.0 update. Once you're on 3.0, read the instructions for 3.01 and install accordingly." What question remains? Update 3.0 based on the instructions posted here. Go to the 3.01 update and follow the instructions there. no worries i found the link on pioneers site.. thx

Copy the files inside that zip file into the "\my flash disk".... it should look like this: http://www.imagebam.com/image/7d979142574344 But first delete everything that is in your "\My Flash Disk" .....then copy the files over... be sure to copy the files INSIDE "My Flash Disk" from the SD card and not the folder "My Flash Disk"...

hmm ok... what cable are you using for your iphone? the one supplied from pioneer doesn't work w/ my 3g.. iphone has latest firmware.

hmm i see... i dont really need to know where i was last time as I'm pretty sure I know where I have been lol... is there a way to disable it and make it go into 3d mode when u turn it on? its kind of a PITA to have to mess with it to get it working... maybe 3.01 will fix this?

then start over at step one... and copy the correct files to the proper place... you need to UNZIP the .zip file with WINRAR (www.rarlab.com) and then follow the instructions in the link above.

um first of all I can barely understand what you just said... secondly, what exactly is your problem? Where did you get stuck? viewtopic.php?f=34&t=25817 This guide is much easier to understand... read it... or print it out and try it again..

In navi settings i beleive there is an option to snap to road. Turn that option on and that should fix it. hmm i couldn't find that option... another thing after i updated to 3.0, when the system boots up and i go to the nav screen, there is a waypoint selected and I am unable to remove it... but after a few minutes of mucking with it, it will finally let me go to 3D mode... why is this? How do I remove waypoints?

I want to be able to stream pandora from my 3g iphone on my AVIC-F90BT... anyone been able to do this? Thx!