Dan1701z

I thought I read in another post where someone said that it just directs you to the block that the address is on. Like my house is 1225 it knows which side of the street I'm on but says I'm there when I'm only halfway down my block. I've noticed it do this going to other places also. Dan

I have a 04 Tacoma and it fits for what its worth. Crutchfield also said it wouldn't fit in my truck. It not only did fit but I didn't need any aftermarket brackets I just swapped the factory brackets over from the old stereo to the D3 Dan

be careful the pioneer cable is setup different than other brands. I don't know how to explain it but on the part that plugs into the d3 the wires are re aranged so if you buy a different brand the rca connectors might not match up. Like the yellow connector might be a audio source and a red might actually be the video etc. I just found where I read it, bottom of page 16 in the D3 INSTALLATION manual. I don't have any initial need for using this cable but I ordered it with my D3 anyway, whats another 20 bucks on a 1k unit. Dan

I think I am having the same problem. It started after I hit shuffle/random and I haven't sat down and read the manual yet on how to get it off shuffle. Dan

I thought it was because pioneer makes all their xm recievers to be backwards compatable with their older "ip bus" stereos. Its cool if you have a old stereo running xm but if you fork out 2k for stereo equipment it kinda sucks. Dan

I doubt this is possible, but would there be any possible way to upgrade a btb100 software to the 200 software? Dan

I put mine here on my ex cab tacoma. Its a little low to the ground but it was the only place that wasn't totally obvious. I don't want the cam to clue people that I have a nav system to go with it. But yeah this is where I put mine.

I've heard people every now and then talk about having a lifetime membership to xm. I have not seen this offered on their website and was wondering if you actually can get it, how much it costs, and how to get it? Thanks Dan

Page 53 in the D3 manual explains the nav traffic icons. I too couldn't figure out what they meant. Its crazy because the navtraffic tuner manual didn't have any info about them. Dan

I used the XMSCION03 code and I am a returning customer. I was a little surprised they took it definately a good deal. Dan

I put mine on the roof, yeah you can get away with it inside but you'll always get the best signal on the roof. It was a major pita to pull all the panels and such to get it there but I'm glad I put it there. You only have to install this thing once so I figured I'd do it right. Dan

I think that means you have the wrong disc in there. There's a east and west disc. You have to look at the pic on the orginal disc to see which one you need. I'm in MO and I figured I'd be on the east disc but actually MO is the cut off for the west disc. Dan

seems like they get a new shipment every monday or tuesday. Dan

Mine does in the form of "no signal, weak, marginal, strong, very strong" Just go to the info/traffic tab and hit "xm status" P63 in the D3 Manual talks more about it. Dan

not many, I just figured out how to change the gauges the the g meters yesterday. Plus I drive a truck also so I dont wanna push it very hard. Now if I had the D3 in my T/A then I could have a little more fun hehe. Definately another cool feature of the D3!! Dan