gremlin190

Hey guys, I currently run Daftia's Hybrid mod and enjoy it. I was wondering if I could just somehow load HobDrive? I have a few tweaks such as my car as the map pointer that I'd rather not do away with. Plus I have no idea what this mod looks like and I don't think I want primo? TIA

Computer to do mods on $400 Radio replacement $500 Spending time with your grandkids $priceless Thanks for all the contributions. I know I'm using some of them!

ABB1 I got it, your link pointed me in the right direction. I had the car min and max values set wrong. Thanks

Hey ABB1 What setting did you chnage to move your car up higher on the screen? I have a problem with mine not covering the arrow completely. The code for my car placement is below TIA

Need help. I just added my 3d car for the 3d map and it shows up, no problem. However, I still see the nose of the arrow peeking at me. I have adjusted the y axis of the command below I had to add with no luck. If I adjust the X axis, I see the changes. Is there maybe a way to turn off the arrow completely? I know that you didn't do the 3d car write-up. but I wanted to make sure something I did wasn't conflicting with your settings. TIA

Updated, I found my issue with the 3D flatness level. It was related to smart zoom. I made the adjustments, and it's set to my liking. I wish i could adjust by increments of 5 instead of 10, but it's close enough Also, My POI stuff started working yesterday. I need to play more, but I think it started to work. So now I'm down to 2 questions/request: On the top where the road you are is listed, Could there be some more space between the road name and the hwy number. The 3 digit road number almost runs into the street name. Also, do we have a way to change the arrow to a ca

I'm going to post here becuase I'm using this mod, and have some comments to make. My speed cameras look to be exactly where they should be. Only a couple are off. However, with that said, my cameras aren't true speed cameras. The ones in the city are actually red light cams and the ones elswhere I imagine are known police hideouts. Avic-f700bt no MSN official 3.0 firmware and this is the first mod short of the newest map update. Questions and comments On the top where the road you are is listed, Could there be some more space between the road name and the hwy number. The 3

Could we make our nav look like this? I think it's much cleaner. http://akamaipix.crutchfield.com/products/2009/06/099/x099AVN726E-f.jpeg

Thnaks carver for this hard work. I thought you had gived up on it because you were gone so long. If you get everything solved then you should do a paypal account so people can donate to your cause. Maybe it will give you more inspiration to make other changes

What about a sct xcal 2 device ??? It performs similar functions and is used by the mustang and the f150 that I know of. I can monitor lots of sensors and speed and such with it. Something that allowed users just to monitor stuff going on with maybe analog gauges might be neat. What do you think. BTW, this device normally plugs into my odbII port and then plugs into a usb port and we use sct live to monitor things.

Nope, it's still one line on the map. It truncates at 16 characters I believe. It sucks. We have all this techonology and the programmers can'rt seem to get there thinking caps on straight. Anyway, I was hoping someone would get the update from the AVIC-Z110BT and apply it our f series. I beleive it has a 2 line display on the bottom

Received a survey about my radio today. I copied and pasted it for everyone to see. Just wanted everyone to get a heads up incase they may have missed it. Might be something you get when you register the radio, but idk. AVIC.pdf

Thanx Can you use the knob to switch presets now instead of it just going to the next channel

Sounds like it will, you will just need the ipod cable. I have no idea how it stremas to the car radio though. FM modulation? http://www.crutchfield.com/S-Z2LxpGY3ru ... 500BT.html for 189.99 http://www.6ave.com/shop/SearchResults. ... vic-f500bt

What about the ND-MDT10 tuner for the new x110 tuner? Since the software is similar??? maybe that would work?

Awesome progress What about Opera Mini? http://www.opera.com/mini/

Hmmm, I wonder if you're going to have to purchase a sd card to do the 3.0 update due to it now being free. Also, I wonder if it's encrypted in a way so you can't copy it. It would make some sense for them to do that since they supposedly will be charging for the update.

Ravic, When I registered for the software, a guy emailed me days later to see if he could help with it. His name is Mike Ruiz and his email is mruiz@adeneo-embedded.com and I have other contact info if you would like. You seem to have a better understanding of what you need, so he maybe able to help us...

I would guess this one Step 5: Edit data.zip\ui_pioneer\800_480\ui\navigatemap_800_480.ui to add the following lines in the very first layer section: My guess it would be the y axis, just decrease the value by something like 20

I don't want to brick my unit... What about someone who has wince working with the avic software. Think they'd want to help???

Hey I pm'd you back. I had the reboot problem too. I think it has to do with the way I zipped the file back. I never did find the Proper way to zip the data file backup. I tried 7-zip and windows default zip and basically had the same issue as you. Maybe someone can go over the proper way to zip things up such as compression ratio. Anyways, congrats on getting it to work.

Looks pretty basic. Copy the cab file to the device and then dbl-click it to install it. List of requirements: · CAB File Installer/Uninstaller (to use binary package) · USB Host Support (or Serial Port Support) · Bluetooth Stack with Integrated CSR Chipset Driver · Graphical Shell (Standard Shell , AYGShell API Set if no Mouse device) · Bluetooth Stack with Integrated USB Driver (or UART-Only Driver) · Microsoft Foundation Classes · Object Exchange Protocol (OBEX) /Obex Server + Obex Client · C Libraries and Runtimes o C++ Runtime Support for Exception Handling and Ru

1.) yep 2.) not yet, people are still trying to figure it out, but it looks like they will have to reverse engineer some executable

I got it!!! I'm not sure why this worked, but I selected the car and then on then selected the alpha color channel. I then cut the car out using ctrl-x which turned everything that was around the car black. Saved it and put it in and bam all was good.

looks good, try it out then see if you had the alpha channels set, It worked , but I have a white background.... I put the image on a tranlucent background. Also, I had to insert the files into my good data.zip. If I used one I let windows create then the unit would give me a windows error and then reboot after about 2 minutes. Is there a write up on how to properly make a data.zip file??? Now How do I get rid of the white background??? Also can I make the car a tad smaller? Do I have to do it photshop are can I edit the data.zip