Jump to content
AVIC411.com

Jfinley0

Members
 View Profile  See their activity

  • Content Count

    226

  • Joined

  • Last visited

 Content Type 

Everything posted by Jfinley0

  1. Jfinley0
    I can't bc I don't have the ability to copy to the HU (x940bt). I have no access to CondiHack 2.2. I can get into the super Testmode but have not firgured out how to copy from SD to HU. CondiHack or Pionara What so you think? If I can get a scriptexec to copy my backup Nand from Sd to HU, i think it will work. Jimbo
  2. Jfinley0
    FIXED!!!!!!! I bricked my x940bt this morning when I was messing around with the files. I deleted the PRG0 AND I believed also PROG1on the unit using super testmode(file mantenance). I tried everything to get it back up. I have music but "No application program" error comes up. I tried installing FW4.01 and it did install but there are files missing in PRG0. I do have backup (NADA) but not sure how to copy it to the HU. I went under file maintenance test mode but could not get to my SD card to copy the files over. I tried copying the Condi hack to get to file explorer but no luck. If
  3. Jfinley0
    I would like to try this. Jimbo
  4. Jfinley0
    What I did was downloaded firmware 4.1 and then found the av.exe inside the folder of APL of the fw4.1. I then copied the av.exe to the sd card and then copied to prgo/apl using condi hack. i deleted the av.exe first on the HU. Jimbo
  5. Jfinley0
    I have the 4.000 software. Can I upgrade to 4.001 software? Jimbo
  6. Jfinley0
    I have x940bt. I do have 4.001 software. I can email you the nav.exe if I get you email. Thanks Jimbo
  7. Jfinley0
    Hi There: I search for the offset 15aefc and offset 15aee8 and did not find the code in Nav.exe. Can you upload it and I will try it or maybe I don't have the right Hex changer program. Thanks Jimbo
  8. Jfinley0
  9. Jfinley0
    I could not find the user folde so I copied the Nana folder. Would that work? Jimbo
  10. Jfinley0
    Should I go ahead and try v2.2? I already installed 2.0 and 2.1. Jimbo
  11. Jfinley0
    Can you give me the link? I did some searching and not sure what I am which one it is. Jimbo Edit: I fixed the problem by replacing the av.exe from the f40 firmware! Thanks to Condi and Ralpharn!!!!! This is cool! Jim
  12. Jfinley0
    Hi all: I just installed x940 from F90bt. I have always love hacking and learning. I screwed up and need help! I did not backup my HU is causing my trouble. Always have a backup file!!!!!!!! I installed Condi Hack 2.1 and ran into trouble. I am looking for the original pioneer stock av.exe file. Condi is working on this for me but if anyone had a backup please let me know. Thanks Jimbo Problem solved! I deleted the av.exe thru Condi Hack in and replaced it with av.exe from FW40. Now it is working again! Thanks
  13. Jfinley0
    Thank you. If you can make an auto fix for me that would be great. The Unit is a new x940 so I am not sure the fw version I have. I used to mess around with my F90 so this modding is so much different. Do you have the original av.exe that I can install? Like i said, I did not make a backup file. Thanks I will will be buying you a beer! Jimbo
  14. Jfinley0
    Hi Guys: I did the Condi hack 2.0 and did not have any problems. Then I installed the Hack 2.1 and while I can get into the Condi Hack the HU locked up when I exit Condi Hack.. It just hangs at the start up. Unfortunately I did not make a backup because I could not find the user file/folder. Can anyone help me for the next step? Thanks all, Jimbo
  15. Jfinley0
    Which files or folders do I backup? Jimbo
  16. Jfinley0
    Tried the Hack and got a red screen at the end. it seems like all the files were copied over. So I took the sd card out and restarted and it boot up fine. Now should I have the capability to copy files on the 940? Not sure how to get in to do that. Jimbo
  17. Jfinley0
    FYI IS this for the 940? I tried the on the 940 and did not see copy and paste. Jimbo
  18. Jfinley0
    You are right. I cannot copy and paste. Just have to wait to see who can crack this open! JImbo
  19. Jfinley0
    Well I upgraded to 940 from F90BT. I really loved modding the old unit and spents tons of hours modding. It sounds like the 940 you can't do. IF you have iphone then the 940 is for you. I used pretty much the same wiring (I had an installer put it in) and the bypass. The rca connector was the only thing he used when putting in the 940. It is much faster booting up and I can't wait to start modding if it can be cracked. I do have the F90BT for sell if you are interested. Jimbo
  20. Jfinley0
    Will this work on the x-940 HU? Jimbo
  21. Jfinley0
    Hi All: I am upgrading from my F90bt HU to X-940 soon. Questions I have: Can I use all the same harness that I used for the F90bt? I had to add extra harness to my Trailblazer for streering Wheel Controls and door Chimes. I have the parking brake bypass from the F90bt. Will this work on the 940? Thanks Jimbo Edit: Updated.... I had the x940 installed by an installer. The only thing that he needed was the RCA connector from the new kit. I also had the bypass done on the connector and everything works great.
  22. Jfinley0
    I have F90bt. I have done everything including the gyro and the wince flash.I will delete the IGO folder and let you know what happens. Thanks Jimbo
  23. Jfinley0
    I had the same problem so I had to go back to Avic 2.0 and everything works fine when I copied back to 2.0. I also have my parking brakes grounded so that is not the problem.. Jimbo
  24. Jfinley0
    Hi Everyone: I used MSN Direct until Jan 2012 when they discontinued doing the service. Is there any codes out there that we can put in Avic series to alert us on traffic jams, weather etc that can replace the old MSN Direct or tuner for F90BT? I know some GPS units uses the Info that comes off the Freeway Signs that alert drivers how long it will take to get to the next major freeway etc. It would be nice to know the info if there is construction zones or traffic jam on your route so you can change routes. Any info would be great! Jimbo
  25. Jfinley0
    The password got the Italian AvicNet 2.1 is : BaguAvicNet2.1_Multilanguage Jimbo
×
×
  • Create New...