hwegener

I am not a programer, but are you not going about this wrong? The Nag screens shows typically only once everytime the unit is started. This tells me that there must be a "System Variable" some where that gets triggered saying the nag screen was shown and OK'd. Is it not easier to have the system variable set at boot up to say the nag screen was seen and approved? Again, I am not a programmer, but obviously no matter the approach, if a sub-app says it is time to show the nag screen, it would check the settings to see if that was already done, then display or not display it.

Waiting for response also - Mine is doing the same thing??

Waiting for response also - Mine is doing the same thing??

IDT - A "quirk" I noticed is that the Arrow, (car icon) sits almost completely through an intersection when I am at the stop line. During Nav. my Arrow is about 3/4 to 7/8 of the way past my turn by the time I am at the actual turn. This is frustrating in unfamiliar terrortory with a tight cluster of streets. I also noticed during Nav. that I am about 40 meters off in distance. Is there a "Calibration" somewhere? I am currently running only the IDT 3.0vFinal mod if that has anything to do with it. I realize I am being fussy,

Thankyou for all your your work IDT. This is by far the best MOD for my tastes, I have been running it since its release and have no intentions of going with a different MOD. ( I prefer it over skin2, sorry) If someone could let me know how to change the background behind the time and date to a solid background?????

next upgrade idea.... I love your mod and have settled on leaving it well enough alone - I am not considering any other mod anymore. Great work and Thanks!!!! If something could be added, I would say a web browser using a USB wireless network stick. I know this is useless while mobile, but I am not always mobile (camping) also, I have had times where I wished I could have pulled over and search for some info on the web just an idea

Does anyone know where the "firmware" for MSN diect is installed on the flashdrive? I am getting a improper install error on MSN direct and it is telling me to recopy the firmware to the SD drive. I am sure I have a copy of that somewhere, but if any has a copy as well, that would be helpful. I am running ver3.02. MSN direct is free now until it dies, so I would not mind making use of it until then

It makes it to the windows desktop of testmode AND THEN shuts down??? You are sure your power is not shutting off for any reason?

That statement is 100% wrong, just to repeat, he's 100% wrong. The symptoms you describe are exactly what would happen if you had the parking brake wire were not connected to anything. What he's trying to say is that if the GROUND is disconnected the unit shouldn't work, but I don't know if that error is him being wrong, or misunderstanding something, or it losing something in the translation from him, to you, to the board. dianebrat is right, tell your installer to recheck the install

I was in the same boat and used the same solution - reformated and re:installed WinCE The empty flash drive is a result of the reformat and reinstall of WinCE My problem was caused by playing to much

I play way to much and thought I would share my minimal experiences. Hopefully others will add to this thread so that when we play, we can recover more easily. First, always have a backup of at least one copy of the whole flashdrive. Once you apply a mod, and it works, make a new backup of the apl2/igo folder. This way you will be creating restore points in case you need them in the future. You will be able to go all the way back to stock if you end up not liking the mod you applied. Every time you try a "NEW" mod, start from stock. Everyone here seems to expect a stock starting

No, I do not beleive my ezrider.exe came from you- My AVIC folder is fairly unorganized with multiple different mods and I beleive the one I was trying to use was from Ver 2 - it was a 2008 file date. I did have the wrong ezrider.exe, thanks for the help it is now working did the wrong non-working ezRider come from my download? If it's broke, I'd like to at least take it down to keep the confusion to a minimum.

I did have the wrong ezrider.exe, thanks for the help it is now working

Updated maps, but not working When I use the hacked ezrider.exe the unit will not start, hangs on "System starting" for 5 or so minutes then restarts. I have the 2 extra license files the Generic World and the Generic Add-on file in the igo directory and the igo/license directory When I switch back to the stock ezrider.exe, my system boots but does not recoqnize the map files. So, I am having issues with my hacked copy of ezrider or the license files Note that my system claims to be running firmware 3.2 Any help would be appreciated

I purchased and have the 2 SD cards for the version 3 upgrade. How do I get it to rerun? After a lot of playing, I needed to reformat my flash disk and image windows CE off the Pioneer supplied upgrade SD's. Everything works except for MSN, status saying that the firmware upgrade failed and I should reinstall it.