Jump to content
AVIC411.com

jezikk

Members
 View Profile  See their activity

  • Content Count

    49

  • Joined

  • Last visited

 Content Type 

Everything posted by jezikk

  1. jezikk
    I found that in the debug mode -> process explorer there is a reboot option on the tab. Also, I found the problem is not necessarily connected with the memory, I manage to check how much memory system have when I got the "out of memory" box, it has ~60MB of RAM. When I reverted back to ABB'ys mod completely (also the .exe files) everything is ok. When I get some free time I'll check the exe files.
  2. jezikk
    Ok, thx for Your help, what I'm planing to do is: 1. restore old ezrider.exe i see what happened 2. restore ABB's mod where everything was OK 3. Maybe I'll try new file from firmware 4.0 Do You have any idea how to modify the SystemSetting.exe -> DEBUG MODE in System Information tabs, to add there an restart options ?
  3. jezikk
    My unit is F910BT (European version) System Resource Monitor: Memory: - Program 82MB used 120MB free - Storage 350kB 131MB free Flash: 270MB free 1,52GB used AVIC_crash.txt contain some errors from just a few hours. I can send you the whole file from about 2 weeks, but its size is ~20MB. Case 1: most common error; very often unit stay on the main screen (doesn't switch to map). I use the map view (not the Stealth mode) Case 2: directly connected with case 1; 60-70% of time when I quickly press the map button I got the error. Case 3: I can sent, but You would need EU maps the get
  4. jezikk
    Steps for the "out of memory": Case 1. Usually when the system automatically run the map i got the error Case 2. When I press the button MAP on the device "too quickly", let say under 5-10 sec after the dialog "system loading" disappear. Case 3. When I have a long route with a Via point or then I get multidraw on that route Case 4. During the navigation, e.g. when it turn from the the rear camera vie to map Case 5. Sometimes It happends when the GPS not jet get the position The crash.txt I will send you later today. After I get the out of memory I cannot use the map software, so
  5. jezikk
    Frequent "Out of memory" problem Hi, I use your mod for a while but on the newest version often I get "out of memory" windows ce box with OK to close. After I close the box, the Igo software is unusable, I have to reboot the AVIC. Do You have any idea what can be wrong, I have over 200MB free on the flash drive. If you want I can send you the crash.txt file from avic. Moreover, can you tell me how to add position "Restart" to the Debug menu in the system settings? You added there e.g. "Open explorer, Process watcher, etc...". Thanks in advance. Lucas
  6. jezikk
    Turn off smart zoom in the navi settings.
  7. jezikk
    I put the code above + added to visiblemodel &!has.route and it's working quit well. However, in some places house numbers are not showing but when I click on the map (left and right side of the road) I see the correct numbers. Thx IDT.
  8. jezikk
    you could press the current street name area for the house numbers to show up Can you tell me how to make house number always on if i'm not in the navigation mode (&!has.route) ? E.g. Now i have to press current street to show up house numbers and small house icon to hide. After the modification I'd like to have house numbers switched on while not in navigation by default. And if I press small house it would be hiding.
  9. jezikk
    IDT, I have quick question how to add house numbers to the main view, while you are not in the navi mode. I'd like to have it on the view like Your firs screen in this treat. When I go to info screen (split screen) i see numbers but not on the other view. Can you help me with it ???
  10. jezikk
    Thx for the correction "planmode not properly going to location". I found also that this bug is also on the poi screen. Is this bug corrected in version #3 ?
  11. jezikk
    here's something i would like you to try, 1) grab a 2009.06 EU map and place it in the map_nt folder found in MYFLASHDISK\APL2\IGO\CONTENT and also copy basemap.fbl from map folder to map_nt folder, 2) now boot your unit and enter the address you provided above, check to see if it's wrong, 3) now delete the route and go to settings then changer then click maps, verify that the map is 2009.09 4) click back then click navteq and it will tell you to reboot your unit for changes to take effect, 5) once it boots go to settings then changer then maps and verify that the map its currently usin
  12. jezikk
    i will try to work on it this weekend, then i'll send you some zips to test Some address examples that are placed wrong (Poland): - Krakow, Bronowicka street no 13 (should be beetween Glowackiego and Rydla) - Krakow, Lea no 124 should be 100m east from Przybyszewskiego
  13. jezikk
    i compared both EU zip files with the regular and can say that they are the same, could you try using the regular zip or the msn zip and see if it's still wrong, also, what map are you using? provide me with the map version and country and a destination where you always get wrong address and i will work on it on the weekend I checked twice with the EU, alternate EU version 3.0.2.5 - with both it's wrong. With the previous version and Diaftia mod everything is ok. I use TA 2009.9 maps. I saw that all mu fav, home are now placed in the wrong places. Maybe it's connected with it. Norm
  14. jezikk
    now this is weird, could you try reloading the original data.zip and try it and then reload the EU DATA.zip and try it too, not sure why this is happening, if the problem still continues i will look more deeply into it, anyone else having this problem? I checked twice reloading between 02/15/10 and last version from 09. On the 09 version everything is ok, on the 02/15 is something wrong. I hope to have some free time on friday to check alternative EU version and oryginal. I'll keep informing you. Can anybody else from EU confirm that issue ?? Maps are TA 2009.09.
  15. jezikk
    i will try to figure out how this could work, i'm not aware of any commands that would lead to the phonebook but i'll try I made some testing and what I found: - power up avic, connect mobile phone - i'm in the navigation mode and press green handset -> move me to Phone Menu. - Now I click Menu hard button and click on the contacts - from the contacts view I click hard button MAP I'm back in the navigation mode. - now when I press again green handset it moves me to contacts instead of phone menu. - if now i manually go to phone menu and get back to map, next click on the gree
  16. jezikk
    IDT, I have found following issue with you latest update. I use EU version from 02/15/10. I go to search address, after typing correct address I'm on the planing screen and here the address is placed (shown) correctly. After I click "Add Dest" I'm moved to navigation screen on the map. However on that screen destination is places in wrong place and navigation tell to drive to wrong place. Usually it's about 1 mile moved. With your previous mod (from 2009) everything was ok.
  17. jezikk
    Hi IDT, I use your latest mod, and i'm curious do you know how to change the phone link from Phone menu to PhoneBook ? Now when you click on the green handset the Phone Menu from AVIC is shown (there you have the dial pad, incoming/outgoing calls). Instead of this view I'd like to see the PhoneBook view where I can find person I want to call. Is it possible ?? Can you post me what to change to achieve following behaviour: - short click on the green handset: open Phonebook - long click on the green handset: open Phone Menu (as is now). p.s. Please add to your instruction informat
  18. jezikk
    Take a look to this threat: viewtopic.php?f=34&t=23158 as in that mod there is a additional menu under navi setting where you can call Reboot.exe to soft-reset the device.
  19. jezikk
    Try to start ezrider from the testmode and see if it has any errors. Did you install any mods ? Try to delete user files ("My Flash Disk\USER\UserData\iGo\save").
  20. jezikk
    Hi, AVIC with firmware <3.0 run Igo 8.0. AVIC with firmware 3.0 and newer run Igo 8.3 To use newest maps you need hacked ezrider.exe and generic worldwide licence.
  21. jezikk
    Hi gays, I'm in touch with a polish gay that said he manage to use mapchanger on the AVIC with additional maps stored on the external USB or SD card. I sent him here to tell us more on the topic, however he is not interested in community sharing of his mod. I'm thinking of buying it so maybe I be able to help. Interesting is also that he said he manage to install and start MIO Pocket with full integration of avic (eg: radio, phone is working).
  22. jezikk
    No, You just boot your avic into test mode and copy it to My Flash Disk/APL2/Igo/Content/Voice and later in the setting you choose Samanta TTS.
  23. jezikk
    Here you have a treat about Gurjon skin: viewtopic.php?f=34&t=26699&p=202280&hilit=gurjon#p202280 Unfortunatly, It's not very active topic.
  24. jezikk
    I will upgrade navgate feeds. However, maybe in some mod here are bigger collections of poi icons ? Where can I find instruction how to add icons to internal collection ? how can I add whole user poi collection to navgate and how can set name for them (or keep the original) ?
  25. jezikk
    Unfortunately, It's not working. Original KML poi files have structure like this: <?xml version="1.0" encoding="ISO-8859-2"?> Apteki Poronin</p><p>961</p><p> 20.004537,49.337833 The same kml file after feed editing: <?xml version="1.0" encoding="UTF-8" standalone="no"?> 1.0 icon20100118-201700.BMP Apteki Apteki 20.004537,49.337833 icon20100118-201700.BMP Poronin<br>961<br> I suppose that the "
×
×
  • Create New...