azrcnut

i used it on my 900 but i used the x900 3.01 first no probs ......what subie u got???

I havent heard much talk about this update...I understand prob not that big of a deal but if i fixes one bug should be allright. I have had it on my f900 most of the day...no issues... havent used it to its fullest. 30 sec boot time with bluetooth on... Using Daftia's 2.3 with 3dcar . I had to reinstall branding. , and help it find me... had me sitting at default (los angeles) which is cool cause I finally got to see buildings with my avic..I 'm glad that all the time I spent with the 9.6 Ta/Nt maps pois dlc's actually paid off. not many buildings this part of AZ..took a minute to get signal b

http://www.filefactory.com/file/b0bb7ha ... oi_dem.rar

took me 1 min. in a search http://avic411.com/forum/viewtopic.php?f=34&t=29258

Can i just double check with you.The 2 files impreza.mdl and impreza.tex should be in apl2/igo/data/gfx ie the gfx folder that is contained within the data.zip file and not the one in apl2/igo. Correct they are in the DATA.zip

Ok so I really want to make this my full time mod .... but 1 thing is killing me I have been back and forth between this and IDT's mods and mapchanger , Navteq , Teleatlas.. I want Daftias w/9.6 teleatlas and most importantly the subaru impreza ....I have no problem fixing the sys.txt with other mods for some reason I just can't get that car on Daftias..... I have the .mdl , .tex files in gfx , 3dcars, apl2/igo folders and I get the start up screen If anyone could help me out that would be awsome (before I wear out my SD slot.....lol) I have tried these two methods and more: sys.tx

Thanks for your time and check your email PP..., I am setting up the Map changer ....I got all the files (navtec)... so they go in the same folders as the stock maps dem etc....??? I was originally wanting to run it all off the sd card but I couldn't find any info for the right paths in sys.txt to do that ..not sure if I had to make folders and blah blah.... If I have the paths for the changer whether its SD card or avic flash ... I can prob figure it out. would rather have the right info then loading 2.0 back in it tonight.....lol

Ok so maybe the sd card setup isn't ready....So how do I set my folders as far as Map ,Buildings , POI and DEM for Map changer . I remember making the map_nt folder... does all of it go in there ??? please let me know I am hitting the road in a couple hours and would to see it working...thanks

thx .... anyone know what path in the sys.txt to read maps off of SD card. is it: 2=",map_nt,\Storage Card\iGo,," 2=",map_nt,\Storage Card\iGO8,\ResidentFlash\iGO8," or if you can give me the steps to do it I just have the maps , do I need DEM file or whole other apl2 folder?? Thanks going on a road trip today ....show off my NAV thanks to you guys.

what version igo are we using or what navtec maps do we use R1 orR3...thx

Add the following codes below to sys.txt then put the .mdl and .tex file of the car you selected in the "gx" folder of Data.zip. Make sure 3dcars is in the Igo folder. [map] 3d_scale_carmodel=1 3dcarsizemin=5000 3dcarsizemax=8000 3dcarsizemul=30000 [3d] ;change the .mdl file to the car you selected car_day=flying_carpet.mdl car_night=flying_carpet.mdl ghost_day=flying_carpet.mdl ghost_night=flying_carpet.mdl [3dcar] work_dir="\My Flash Disk\APL2\iGo\3DCars" location of 3dCars folder mortscript="\My Flash Disk\APL2\iGo\3DCars\Themechanger\MortScript.exe" ;location of M

I too love this mod.....Has anyone had any luck getting 3D cars working on Daftias...I tried a couple times and and it gets stuck on system startup screen ....im guessing I have an error in my sys.txt ... I used IDT's sys.txt corrections to run the cars it works on his mod thought it would be the same for Daftias...any help would be awesome.

I want to use the subaru for my 3D car but dont know what file it is...it comes up as default but size parameters don't apply....thanks

I got it ....thanks its pretty cool ..is there a way to change elevation to feet?

quick question with v2.3 can I incorporate IDT's 3D subaru instead of arrow.....only thing stopping me from pulling the trigger...thanks

also can I run idt3.02.5 with 3.01 firmware?..........thx

ok last night I downloaded all the IDT files and then realized during insllation that I didnt know which files to use...so this is what I came up with; I am on 3.01 firmware: so I installed skin#2 3.01 and fuel calc but after going through all this I am thinking I am missin something like : IDT 3.0 or 2.0 I dont know... I want the whole mod, but should I have installed the IDT 3.0 before the skin#2 because I am missing some files ...like extension folder and the maps for map_nt folder I added. So as for a step by step: I think I shoud have done the IDT 3.0 install then the #2 skin ....ri

I just want to say thank you to those who contributed to this thread.....I followed those instructions and my 900bt works like new again....for others be sure you download the 2.0 firmware the 2.6 download from pioneer does not have all the files just the update files. however you will need the 2 winceimg files from 2.6. on your sd card. for the beginning steps....thanks

I have a f900bt i reflashed my ecu in my subaru after that my screen on my f900bt went blank but would still play music off my ipod the only way for me to get the screen back would be to reset the unit but when i shut the car off and turn back on screen goes blank with nothing until i reset then i get everything back but lose all my settings....an when unit is reset the first screen that pops up is video brightness adjustment... any ideas....or steer me in the direction to put radio back to normal....if i upgrade to 3.0 will this fix it? and maybe a link to 3.0 uograe on pioneer site...thanks