MisFit

you can still get a new 5th gen ipod from apple stores if you find the right person that will admit that they still have them. i recently fried mine. one of customers is an apple store manager, so i went to him and got a brand new one swapped for it. not a refurb. a brand new one

1) pac-swi-ps 2) it has to be bypassed. there are plenty of threads on how to do it 3)two totally different machines, but probably not worth an extra $1,000

07 mustang: Speed Sense dk. blue/yellow ac PCM, top plug, pin 3 The PCM (Powertrain Control Module) is in the front passenger side of the engine compartment.

if you want an even cleaner look, there is a company called SEM that makes sprsy paint specially designed for plastic and vinyl. it is also made in exact colors to match factory interior dashboards

what did this have to do with jesus?

you may have issues integrating the rear seat dvd with the d3

Speed Sense purple/orange PCM, 50 pin plug, pin 1 The PCM (Powertrain Control Module) is on the passenger side firewall. The VSS wire is also found at the windshield wiper motor use this for illumination if the radio harness wire does not work: Parking Lights (+) blue/white + driver kick or SJB, conn. A, pin 11 The SJB (Smart Junction Box) is part of the fuse/relay box under the driver side dash. why would you tap into the ashtray lighter??

sounds like a lot of work just to save $50 on an interface

metra dash kit 95-5812 metra harness 70-5520 will give you most of the wires Speed Sense gray/black ac radio harness or ABS module, pin 21 The ABS module is in the driver side rear corner of the engine compartment.

Speed Sense gray/black radio harness or ABS module, pin 21 The ABS module is in the driver side rear corner of the engine compartment.

i would have to look into what i could use as dash kit that wont look like shit. i'll get back to you

you only need one resisteor. one of those blue/white wires is usually dead anyway. you dont have to cut it, but you can if you want

Speed Sense gray/black wiper motor or PCM The PCM (Powertrain Control Module) is on the passenger side firewall. The VSS wire is in the plug closest to the fender, pin 13. may also be at radio harness Reverse Light black/pink + driver kick, harness to rear

i guess you could get it at radio shack. just put it inline between the two wires. without it, you'll get a thump through your sub every time the avic powers up the factory amp

yes to all, but you need a 3k ohm resistor between the blue/white from the avic and the blu/white from the harness

metra 99-7801

no, panasonic has one

you might be out of luck on that one. in my own experience on newer fords, those wires to the abs module dont give you what you need either

pm sent

yes, that is exactly what they are doing. they dont want their products ending up in places like ebay. this way they can follow the trail that led it there

No, its just ignorance. Fords are the most bsic cars for wiring. No can data involved yet

your installer is an asshole. there is a red/black illumination wire in the radio harness. and if that for some reason didnt work he can go right to the headlight switch and use the brown parking light wire

$500 for a used d3 is no bargain considering a new one after rebate would have been around the same price

just ground it to the chassis

70-1722