MisFit

03 is a cutoff year, so it could go either way. Again, black plug 5519 , grey plug 5521, 5700 will work too if you have the black plug, looks like its a replcement for the 5519

yeah electricians and mechanics

yes and yes

repin it properly

ebay

call an installer

even if the plug was different, all you have to do is match color for color

nope, you'll be replacing both of them

the rca plug goes to the sub output, the other end plugs into the small harnes behind your radio, you usually only need one of those blue wires, when you plug it in see which one lines up with another wire, the other one is probably dead. connect the usable one to the amp remote out of your radio, and put a 3k ohm reistor inline.

yes you do bend the tabs to mount cage, but if you screwed the radio to the cage first than you cant get to the tabs once inside the dash, and if you mount the cage first, how will you screw in the radio? ......Physics! ok, threre are two metal brackets that screw into the radio, that have four small holes on front tabs. then you mount the cage in the dash by bending the metal tabs, then slide raio into cage and mount with eight tiny screwa through holes in brackets into holes in cage. if cc had the cage, they probably had the brackets too, they are kinda useless without the cage, the

alpine nve-k300 is a little 3 inch by two inch box that you mount on top of your rear wheelwell in the trunk. its very easy to install

should work,you just wont gat any display,just the audio. hows your treo work with the bluetooth adapter, those phones dont work well with a lot of stuff

hey ducati, whatcha got? anything good?

hey cntry, that sounded just like directechs to me

how many radios you guys come across with home electrical wire nuts as connectors?

maybe i misread it, go raiders

no holes, it mounts like cntrylvr said, if you screw the cage to the radio, how will you mount the cage???

might be because pioneer makes the ford unit

cntry, why you ordering from cf, side jobs a no no at cc?

ok, i will say it again, there is no true speed sense wire on the new platform ford/lincolns. and as the other guy said, pioneer units work fine 99% of the time without it anyway. its not like an alpine or eclipse that dont know what the hell they are doing without it. put it in learn mode and drive 10 miles, you'll be fine

yeah, they really look awesome in the new ford dashes. the one i did in the 07 explorer looked factory as hell, i'll get a pic when the guy comes back for the rest of his system

yeah, its a 5519 if you have the old style black plug, and a 5521 if its the new style grey plug. And yes, i've always used a 3k on all fords, mostly using eclipse avn units, but some pioneers too, never had a problem, 3k was the lowest i could get to eliminate the pop

You need the amp integration harness from metra. And you need a 3K ohm resistor on the trigger wire to avoid the on/off thump.Done it a hundred times

$30 shipping Yes i am a dealer just started offering them online so just a few so far not sure how paypal works I'm not that far if you want to pick it up

i've got em for $850, i'm in N.J. full warranty