CiD

Well i found another way to get A2DP to work on the F series..... Audio is great! forward and back track works too!! Used a CD-BTB200 as i had it when i was using my D3. You can still have the built in bluetooth for handsfree and the CD-BTB200 for the A2DP... However its a little interesting to administrate.. viewtopic.php?f=32&t=23842 CiD

I know this is a very old post but wanted to share my results on hooking up a CD-BTB200 on and F900BT.... Was rather late in the game on upgrading my Pioneer NAV... I've had a D3 for a very long time and its been a great unit.... I had the opportunity on getting a F900BT for rather cheap so i decided to buy it. I found out that pretty much all the connectors on the D3 are identical so i didn't have to change the harness... Only thing i had to modify is the bypass wire location and use the F900BT GPS antenna due to the different plastic harness it uses... I knew that the F900BT do

My burn was fine... This iso does not work with the D1.... I took that same disc and put it in my D3 and it read fine no problem... (Yes i own a D1 and a D3...) CiD

Just a FYI.. This disc doesn't seem to work with the D1... So i don't think its the exact disc that pioneer will be selling.... as the website says this disc should be compatible: http://www.pioneerelectronics.com/PUSA/ ... /CNDV-80MT I put the disc in... looks like its gonna work... it reboots then it says.. Please put in the appropriate disc

Just got my kensington ipod charger and it works fine... The built in passthrough works fine with the D3 and all functions work (music/info/control).. Just to ensure i am not burning anything out, i disabled the ipod charge on the pioneer. Most likely gonna run the charger cable with the pioneer one and install a cig lighter behind the dashboard to make things a lot more cleaner...

Awesome to hear that it works!! I am still waiting for my shipment to arrive... Its a lot harder to get that adapter in Canada

I was reading another forum that there are rumors of a adapter being made for this issue... Otherwise, would this Kensington adapter work? http://us.kensington.com/html/11205.html It has a pass through so you can plug in the pioneer connector... gonna order one up and see if it does work...

I live in canada and the cost of these units are around $870ish CDN dollars... So you can probably get it around that +10-15% CID

hmm best buy policies must be different in US vs. Canada.... I got mine with the employee discount. Hmm in the US in best buy, do you have to do crappy cheers and when you say loyalty or shrink your suppose to shout something back? Curious if they follow that practice.. CiD

i used it as a extra measure to hold it in place and to prop the trim up so it would match where the corners of the dash plate should meet with the original oem radio. I used a tradional flat file and a vise... i vised the file (used a cloth in between so i don't damage the file and then filed the sides of the trim until it fit.. i usually took 2mm off then checked to see if it fit. I would suggest usuing the avic cardboard box and make a dummy replica of the opening of your dash then use that as a guide to trace how much you need to trim off until the trim ring fits. CiD

I had to be creative and use 2 side foam tape.. I also filed down the trim to make it fit right... This is what i came up with: CiD

hmm i have a simple acura startup logo though i think with a d2 you need to make it a pim file? Here is the image: CiD[/img]

I work at best buy though in canada and we got them in right now... I think they came in on sunday's shipment. CiD

ahh thought so... i noticed this started happening when i upgraded discs on the D1 6 months ago... I'll wait till the new one comes out. FYI: The information on the D3 series is probably less than a year old. Calgary has been doing a lot of road upgrades and i can see that all of those upgrades have been reflected on the D3. CiD

Hmm just called Pioneer Electronics and was confronted by a very rude tech support person and he claims that the D3 does not support RDS. CiD